Abstract:A new numerical-and-analytical method is developed for solving geometrically and physically nonlinear problems of bending shallow shells of complex shapes made from materials with different resistance to tension and compression. To linearize the initial nonlinear problem, the method of continuous continuation in the parameter associated with the external load was used. For the variational formulation of the linearized problem, a Lagrange functional was constructed, defined at kinematically possible displacement velocities. To find the main unknowns of the problem of nonlinear bending of a hollow shell (displacements, deformations, stresses), the Cauchy problem for a system of ordinary differential equations is formulated. The Cauchy problem was solved by the Runge-Kutta– Merson method with automatic step selection. The initial conditions are found in the solution to the problem of geometrically linear deformation. The right-hand sides of the differential equations at fixed values of the load parameter corresponding to the Runge-Kutta–Merson scheme were obtained from the solution of the variational problem for the Lagrange functional. The variational problems were solved by the Ritz method in combination with the R-function method. The latter makes it possible to present an approximate solution in the form of a formula, which solution structure exactly satisfies all (general structure) or part (partial structure) of the boundary conditions. The problems of nonlinear deformation of a square cylindrical shell and a shell of complex shape with combined fixation conditions are solved. The influence of the direction of external loading, geometric shape, and fixation conditions on the stress-strain state is investigated. It is shown that failure to consider the different behaviors of the material in tension and compression leads to significant errors in calculating the stress-strain state parameters.

Nonlinear elasticity under moderate to strong compression

Exactly isochoric deformations of soft solids

Expansion of Spherical Cavity of Strain-Softening Materials with Different Elastic Moduli of Tension and Compression

A mathematical justification for nonlinear constitutive relations between stress and linearized strain

A Nonlinear Elastic Model for Compressible Aluminum Alloys with Finite Element Implementation

The incremental bulk modulus, Young's modulus and Poisson's ratio in nonlinear isotropic elasticity: physically reasonable response

Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids

The elastic stored energy of initially strained, or stressed, materials: restrictions and third-order expansions

Analytic elastic coefficients in molecular calculations: Finite strain, nonaffine displacements, and many-body interatomic potentials

Nonlinear deformation and elasticity of BCC refractory metals and alloys

Elastic solids under frictionless rigid contact and configurational force

Well-posedness of the governing equations for a quasi-linear viscoelastic model with pressure-dependent moduli in which both stress and strain appear linearly

Large Strained Fracture of Nearly Incompressible Hyperelastic Materials: Enhanced Assumed Strain Methods and Energy Decomposition

A nonlinear constitutive model for whole stress–strain behaviors of compressed rocks incorporating crack closure effect

A finite-element discretization of some boundary value problems for nonlinear strain-limiting elastic bodies

A non-ellipticity result, or the impossible taming of the logarithmic strain measure

Nonlinear Deformation of Flexible Shallow Shells of Complex Shape Made of Materials with Different Resistance to Tension and Compression

Elastic Solids with Strain-Gradient Elastic Boundary Surfaces

Geometrically consistent nonlinear plane strain and stress constitutive models: Application to soft-material oscillations

An elastic-viscoplastic model for large deformation