Abstract:Tunable filters are vital not only for dynamic display but also in the miniaturized spectral imaging system. Yet, the present tunable devices possess low optical throughput, bulky volume, slow response, or complex configuration. In this paper, the study proposed and experimentally demonstrated a compact tunable filter module based on metagratings combined with liquid crystals (LC). By the synergetic effect between the birefringent LC and the dichroic metagratings, the module possesses distinct transmissive features by electrically tuning the LC material, resulting from the polarization interference effect. A simple nanoimprinting method, which is suitable for the mass production of nanostructures is adopted for low-cost fabrication. These unique features endow the present tunable filter module with low cost, high optical throughput, and compact volume. As a proof of concept, a multispectral imager is built with this filter based on a commercial microscope. Experimental results show the system response is five times higher in optical throughput across the whole visible region than the traditional liquid crystal tunable filter and the signal-to-noise ratio can be improved by 7 dB. Considering the feasibility of nanoimprinting, this module paves the way for spectral imaging in low-light conditions and on-site scenarios such as tongue diagnosis and food quality inspection. In this paper, the study proposed and experimentally demonstrated a compact, low-cost tunable filter module based on metagratings combined with liquid crystals (LC). It shows an optical throughput five times higher than the traditional liquid crystal tunable filter and better spectrum reconstruction performance in the low-light condition.image

Automated real-time spectral characterization of phase-change tunable optical filters using a linear variable filter and infrared camera

A Pressure-tuned Field-widened Michelson Interferometer System As the Spectroscopic Filter of High-Spectral-resolution Lidar

A Programmable Optical Filter with Arbitrary Transmittance for Fast Spectroscopic Imaging and Spectral Data Post-Processing.

Application of phase change material in tunable optical filters and shutters

A High Throughput Tunable Filter Module for Multispectral Imaging

Integrated Photonics for Infrared Spectroscopic Sensing

An Arrayed Liquid Crystal Fabry–Perot Infrared Filter for Electrically Tunable Spectral Imaging Detection

Electrically reconfigurable phase-change transmissive metasurface

Broad-tuning, Dichroic Metagrating Fabry-Perot Filter Based on Liquid Crystal for Spectral Imaging

Fourier-transform Spectrometer Chip Covering Visible Band on Silica Planar Waveguide

All-optical continuous tuning of phase-change plasmonic metasurfaces for multispectral thermal imaging

A Tunable Liquid Crystal Fabry-Perot Hyperspectral Imaging Device in Mid-Infrared Wavelength Range

Electrically Reconfigurable Phase‐Change Transmissive Metasurface

Tunable mid-wave infrared Fabry-Perot bandpass filters using phase-change GeSbTe

Compact Mid‐Infrared Spectrometer Using Continuously Variable Infrared Filter and Microbolometer Array for Simple and Fast Measurement of Molecular Mid‐IR Spectra

An Electrically Controlled Liquid Crystal Fabry-Perot Hyperspectral Imaging Chip in Mid-Infrared Region

Design and Simulation of Electrically Addressed Infrared Filtering Chip Based on Cascaded Liquid-Crystal Fabry-Perot Effect for Integration Application of Infrared Spectral Imaging Sensor Array

Tunable liquid crystal Fabry-Perot hyperspectral imaging detectors in mid-infrared

Integration of tunable solar spectral directional absorption and switchable near-infrared transmission filters based on phase-change materials

A Non-Continuous Wavelength Scanning Strategy for Electrically Tunable Liquid-Crystal Hyperspectral Imaging Array

Single-shot Wavefront Sensing with Nonlocal Thin Film Optical Filters