The method to increase the thrust of high Mach number Scramjets

Yunfeng Liu,Xin Han,Wenshuo Zhang,Kaifu Ma

DOI: https://doi.org/10.48550/arXiv.2101.12385

2021-01-29

Abstract:The problem of engine unstart of scramjets has not been resolved. In this paper, the mechanism of engine unstart is discussed from the point of view of shock/shock interaction and deflagration-to-detonation transition. The shock/shock interaction leads to the nonlinear, transient and discontinuous process of the supersonic combustion flow field. This process is similar to the deflagration-to-detonation transition process. If the velocity of pre-combustion shock wave is faster than the velocity in the isolator, it will propagate upstream and cause the engine unstart. The C-J detonation velocity is defined as the stable operation boundary of scramjets, which is the maximum shock wave produced by combustion theoretically. The scramjets will work stable if the velocity in the isolator is faster than the corresponding C-J detonation velocity. The combustion characteristics and propulsive performance of scramjets is theoretically analyzed by using C-J detonation theory. For high Mach number scramjets, the velocity in the isolator is much faster than the C-J detonation velocity. Therefore, extra fuel and oxygen can be injected into the combustor to increase the thrust as long as the shock wave velocity driven by the combustion products is slower than the air velocity in the isolator. The theoretical results agree well with the existing experimental results, which can be used as a baseline for the development of scramjets.

Fluid Dynamics

What problem does this paper attempt to address?

This paper attempts to solve the problem of thrust increase of scramjet under high - Mach - number flight conditions. In particular, it conducts in - depth discussions on the mechanism of the engine unstart phenomenon, and proposes a method based on shock - wave/shock - wave interaction and deflagration - to - detonation transition (DDT) theory to increase thrust.

### Main problems and solutions in the paper

1. **Engine unstart problem**:
- Engine unstart means that when the speed of the pre - combustion shock wave exceeds the air - flow speed in the isolator, the shock wave will propagate towards the inlet, causing the engine to suddenly lose thrust. This phenomenon is a key challenge in the operation of scramjets.
- By analyzing shock - wave/shock - wave interaction and the DDT process, the author explains this transient, nonlinear, and discontinuous process. Specifically, intense heat release will generate a series of shock waves in the combustion chamber. These shock waves interact to form stronger shock waves or Mach stems. If the speed of these shock waves exceeds the air - flow speed in the isolator, it will trigger engine unstart.

2. **Stable operation boundary**:
- The author defines C - J detonation (Chapman - Jouguet detonation) as the boundary for the stable operation of scramjets. C - J detonation is the strongest shock wave theoretically generated by combustion. If the air - flow speed in the isolator is greater than the C - J detonation speed, the engine can operate stably.
- By calculating the C - J detonation speed under different working conditions, the author determines the maximum equivalence ratio of the engine to ensure the stability of the combustion field.

3. **Thrust increase method**:
- For scramjets with high Mach numbers (Ma ≥ 10), the author proposes a method: as long as the shock - wave speeds generated by normal combustion, additional combustion, and mass injection are lower than the air - flow speed in the isolator, additional fuel and oxygen can be added to the combustion chamber to increase thrust.
- This method is similar to combining a scramjet with a rocket engine, increasing thrust by increasing the supply of fuel and oxygen.

### Key formulas
- Theoretical equation for C - J detonation speed:

\[
\frac{T_{0}}{T_1} = \frac{2}{\gamma + 1} M_{C - J}^2 - \frac{\gamma - 1}{\gamma + 1}
\]

where \( T_0 \) is the total constant - volume combustion temperature, \( T_1 \) is the initial static temperature, \( M_{C - J} \) is the Mach number of C - J detonation, and \( \gamma \) is the specific heat ratio of combustion products.

- Relationship between driving pressure ratio and shock - wave Mach number:

\[
\left( \frac{P_4}{P_1} \right)_s = \left[ \frac{2 \gamma_4}{\gamma_4 + 1} M_s^2 - \frac{\gamma_4 - 1}{\gamma_4 + 1} \right] \left( \frac{a_1}{a_4} \right)^{\frac{\gamma_4 + 1}{\gamma_4 - 1}}
\]

\[
M_T = \left( \frac{\gamma_4 + 1}{2 \gamma_4 M_s^2 - (\gamma_4 - 1)} \right)^{\frac{1}{2}}
\]

where \( P_4/P_1 \) is the pressure ratio of the driving gas, \( M_s \) is the Mach number of the incident shock wave, \( a_1/a_4 \) is the ratio of the sound speeds of the driven gas and the driving gas, \( \gamma_1 \) and \( \gamma_4 \) are the specific heat ratios of the driven gas and the driving gas respectively, \( T_1 \) and \( T_4 \) are the static temperatures of the driven gas and the driving gas respectively, and \( M_1 \) and \( M_4 \) are the molecular weights of the driven gas and the driving gas respectively.