Abstract:Sulfate radical-based advanced oxidation processes (AOPs) are highly reliable for the elimination of recalcitrant contaminants by increasing degradability and reducing toxicity. Here, MnFe 2 O 4 nanowires (MnFe 2 O 4 NWs), composed of abundant MnFe 2 O 4 nanoparticles immobilized on one-dimensional carbon nanowires derived from annealed MnFe-Nitrilotriacetic acid (MnFe-NTA) precursor was successfully synthesized. The MnFe 2 O 4 NWs, which could provide more active sites, were then utilized to activate peroxymonosulfate (PMS) for oxidizing the target pollutant Moxifloxacin (MOX) in an aqueous solution. The MnFe 2 O 4 NWs/PMS system acquired 91.9% removal of MOX and achieved 55.1% chemical oxygen demand (COD) degradation efficiency in 30 min. The results exhibited that the increased catalyst doses and PMS concentration lead to ascending MOX removal rate, which decreased with the participation of co-existing ions. Besides, there is a close relationship between original pH and MOX degradation efficiency. It was found that SO 4 ⋅– , ⋅OH, 1 O 2 , and O 2 ⋅– were involved in the MOX degradation by quenching experiments and electron paramagnetic resonance (EPR) detection. More importantly, the stable magnetism of MnFe 2 O 4 NWs contributed to its convenient recycling. Finally, a reliable mechanism for activating PMS was proposed based on the aforementioned results and previous researches, which could exhibit a novel horizon in effluent treatment. Graphical abstract MnFe 2 O 4 nanowires (MnFe 2 O 4 NWs), composed of abundant MnFe 2 O 4 nanoparticles immobilized on one-dimensional carbon nanowires derived from annealed Nitrilotriacetic acid (NTA) were successfully synthesized through hydrothermal combined calcination method. The MnFe 2 O 4 NWs was used to activate PMS to degrade the Moxifloxacin (MOX), which acquired 91.9% removal of MOX and 55.1% COD degradation efficiency over 30 min' consecutive reaction. Download : Download high-res image (87KB) Download : Download full-size image

Peroxymonosulfate activation by Fe3O4-MnO2/CNT nanohybrid electroactive filter towards ultrafast micropollutants decontamination: Performance and mechanism

Enhanced Peroxymonosulfate Activation by a Benzoquinone-Functionalized Carbon Nanotube Filter for Micropollutant Degradation

A novel electrocatalytic filtration system with carbon nanotube supported nanoscale zerovalent copper toward ultrafast oxidation of organic pollutants

Strong metal-support interaction between carbon nanotubes and Mn-Fe spinel oxide in boosting peroxymonosulfate activation: Underneath mechanisms and application

Catalytic degradation of micropollutant by peroxymonosulfate activation through Fe(III)/Fe(II) cycle confined in the nanoscale interlayer of Fe(III)-saturated montmorillonite

Ultrafast degradation of emerging organic pollutants via activation of peroxymonosulfate over Fe3C/Fe@N-C-x: Singlet oxygen evolution and electron-transfer mechanisms

High performance of carbon nanotube-encapsulated CuFe 2 O 4 for peroxonosulfate activation: A process of degradation of sulfamethoxazole in complex matrix water via a singlet oxygen-dominated pathway

Mediated Peroxymonosulfate Activation at the Single Atom Fe-N3O1 Sites: Synergistic Degradation of Antibiotics by Two Non-Radical Pathways

Effective peroxymonosulfate activation using electrified nanohybrid filter towards one-step decontamination of roxarsone: Performance and mechanism

In-situ Construction of Mesoporous CuCo2O4 Decorated CNTs Networks As a Long-Lasting Peroxymonosulfate Activator for Rapid Removal of Aqueous Micropollutants

Constructing carbon nitride embedded Fe 0 for efficient activation of peroxymonosulfate towards organic pollutants degradation in water

Unravelling the synergism of carbon nanotubes encapsulated CoFe2O4 for efficiently activating peroxymonosulfate to degrade sulfamethoxazole

Activation of Peroxymonosulfate by Co-Ni-Mo Sulfides/CNT for Organic Pollutant Degradation

MOF derived MnFeO X supported on carbon cloth as electrochemical anode for peroxymonosulfate electro-activation and persistent organic pollutants degradation

MOFs-derived Mn/C Composites Activating Peroxymonosulfate for Efficient Degradation of Sulfamethazine: Kinetics, Pathways, and Mechanism

Performance enhancement and mechanism of electroenhanced peroxymonosulfate activation by single-atom Fe catalyst modified electrodes

Mo Vacancy-Mediated Activation of Peroxymonosulfate for Ultrafast Micropollutant Removal Using an Electrified MXene Filter Functionalized with Fe Single Atoms

Enhanced activation of peroxymonosulfate through exfoliated oxygen-doping graphitic carbon nitride for degradation of organic pollutants

MnFe 2 O 4 nanoparticles coated on one-dimensional carbon nanowires derived from Nitrilotriacetic acid as efficient catalysts to activate peroxymonosulfate for moxifloxacin degradation

Facile synthesis of Fe(III)-doped g-C3N4 and its application in peroxymonosulfate activation for degrading refractory contaminants via nonradical oxidation

Unravelling the synergism of carbon nanotubes encapsulated CoFe 2 O 4 for efficiently activating peroxymonosulfate to degrade sulfamethoxazole