Abstract:In this paper, a bi-directional-buck-boost-converter-based active equalizer is developed. The energy between adjacent cells can be transferred bi-directionally by manipulating the balancing current to solve the unbalanced problem in a battery module. It is noted that the conduction time of the main switch in the conventional buck-boost equalizer is fixed. Thus, the balancing current will diminish as the voltage difference of the adjacent cells decreases, which results in a prolonged equilibrium period. This paper has proposed two methods, namely, the varied-on-time (VOT) method and the voltage ratio modulation (VRM) method, to shorten the equilibrium period. In the VOT method, the conduction time of the main switch is determined according to high state-of-charge (SOC) cell voltage. In this way, the balancing current is able to be kept at the desired level rather than reduced during the balancing process. On the other hand, the VRM method computes the proportion of the conduction time and the cut-off time in a switching cycle based on the voltages of adjacent cells. Hence, the equalizer can deliver the maximum energy in a switching period and shorten the equilibrium period. The simulation platform and experiments with four batteries connected in serial are carried out to verify the proposed control methods. According to the experimental results, the VOT method saves 10.3%, 11.7%, and 16% of the equilibrium time compared with the fixed duty cycle (FDC) method. The VRM method can shorten 35.9%, 36.6%, and 37.3% of the equilibrium time compared with the FDC method.

A triple-tiered modular equalizer for large-scale battery systems

A Modularized Equalizer for Large-Scale Battery Packs Based on Model Predictive Control

Modularized Equalization Architecture With Transformer-Based Integrating Voltage Equalizer for the Series-Connected Battery Pack in Electric Bicycles

An Efficient and Compact Equalizer Based on Forward-Flyback Conversion for Large-Scale Energy Storage Systems

Multiport DC–DC Converter With Integrated Cascaded Structure for Optimizing Centralized Battery Equalization System

A Reduced-Component-Count Centralized Equalization System for Series-Connected Battery Packs Based on a Novel Integrated Cascade Topology

Development of an Active Equalizer for Lithium-Ion Batteries

An Equalization Current Ripple Cancellation (ECRC) Converter-Based Centralized Equalization System for Series-Connected Battery Strings

A Layered Parallel Equaliser Based on Flyback Transformer Multiplexed for Lithium-Ion Battery System

A crossed pack-to-cell equalizer based on quasi-resonant LC converter with adaptive fuzzy logic equalization control for series-connected lithium-ion battery strings

A Low Cost Battery Equalizing Scheme with Buck-Boost and Series Lc Converter Using Synchronous Phase-Shift Controller

A Single-Magnetic Bidirectional Integrated Equalizer Using Multi-Winding Transformer and Voltage Multiplier for Hybrid Energy Storage System

A Double-Switch Single-Transformer Integrated Equalizer for the Recycled Power Battery String of Automatic Guided Vehicles

Integrated modular equalization circuit for energy storage system

A Novel Lithium-ion Battery Active Equalization Structure and Its Control Strategy Based on Bidirectional Converter Unit

Modularized global equalization of battery cells for electric vehicles

Distributed Control System and Two-layer Voltage Balancing Method for Large-scale Modular Multilevel Converters

Performance Evaluation of Modularized Global Equalization System for Lithium-Ion Battery Packs

Bidirectional Constant Current String-to-Cell Battery Equalizer Based on L2C3 Resonant Topology

Optimization of Centralized Equalization Systems Based on an Integrated Cascade Bidirectional DC–DC Converter

A Modularized Charge Equalizer Using a Battery Monitoring IC for Series-Connected Li-Ion Battery Strings in Electric Vehicles