Abstract:Janus structural interfacial vaporization by separating the solar absorber from the bulk working fluid has attracted tremendous attention due to its low heat losses and high solar conversion efficiency for desalination, water purification, energy generation, etc. However, a totally separated double-deck structure with a discontinuous interfacial transition and inefficient photothermic materials undermines its long-term use and large-scale practical exploitation. Herein, a low-cost Janus monolithic chitosan aerogel with continuous aligned run-through microchannels has been demonstrated to have a highly efficient photothermic effect on seawater desalination and wastewater purification. The top solar absorber layer enhances broadband light absorption and photothermal conversion efficiency via the multiple internal reflection of incident light in the aligned microchannels. Moreover, the insulating/hydrophilic bottom layer promotes water transportation and heat localization, and simultaneously prevents salt/fouling accumulation. As a result, a long-term solar vaporization rate of ∼1.76 kg m<sup>–2</sup> h<sup>–1</sup> is achieved, corresponding to a light-to-vapor efficiency of ∼91% under 1 sun irradiation. Notably, the large-vessel microchannels throughout the aerogel and favorable swelling property provide sufficient water replenishment and storage for completely isolating self-contained evaporation, illustrating an enhanced and time-extended self-contained solar steam generation. Such a low-cost bilayer aerogel with remarkable cycling stability in various fluids offers potential opportunities for freshwater production in remote rural areas.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02198?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02198</a>.Pore size distribution and surface morphology of CS, CCS-60, CCS-240 and CCS-480; FT-IR spectra of the CCS-240 and CCS-480; Raman spectra of CCS-60, CCS-240 and CCS-480; XPS spectra of NFs and high–resolution XPS spectra of CS, CCS-60, CCS-240 and CCS-480 for N 1s and C 1s; thermogravimetric analysis (TGA) and differential thermal gravimetric (DTG) analysis of CS, CCS-60, CCS-240 and CCS-480; axial compressive stress-strain curves of CCS-240 and CCS-480; photographs of the soaking unchanged CCS-60 after two months; transmittance and reflectance spectra of CCS-240 and CCS-480; the hydrophilic property of CS, CCS-60, CCS-240 and CCS-480; calculation of evaporation conversion (photothermal) efficiency of CCS; interfacial water evaporation efficiency from the selected typical publications; the total pore volume of CS and CCS; calculation of estimating the cost of CCS; photographs of the swollen changes of CCS immersed in a solution with different pH values over time; calculation of absorption capacity; swelling measurements; evaporation mass loss in suspending and containing configurations; and infrared images of the solar evaporation processes of CCS-60 containing configuration at the beginning and after 5 h later (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02198/suppl_file/am1c02198_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Co-Assembled WS 2 Nanosheets/Chitosan Aerogels with Oriented Micro-Channels for Efficient and Sustainable Solar Steam Generation

Efficient Water Transport and Solar Steam Generation Via Radially, Hierarchically Structured Aerogels

All-in-one chitosan-based aerogel with a semi-clad structure for solar-driven interfacial evaporation

Multifunctional Super‐Hydrophilic MXene/Biomass Composite Aerogel Evaporator for Efficient Solar‐Driven Desalination and Wastewater Treatment

Self-contained Janus Aerogel with Antifouling and Salt-Rejecting Properties for Stable Solar Evaporation

Carbon nanofiber reinforced carbon aerogels for steam generation: Synergy of solar driven interface evaporation and side wall induced natural evaporation

Biomimetic vertically aligned aerogel with synergistic photothermal effect enables efficient solar-driven desalination

Construction of a biomimetic wood structure with cellulose nanofiber/ molybdenum disulfide hybrid aerogel for highly-efficient solar-driven interfacial evaporation

Vertical porous aerogel based on polypyrrole and bimetallic modified β-cyclodextrin polymer-chitosan for efficient solar evaporation

Multi-Shelled Hollow Porous Carbon Nanospheres-Based Evaporator for Highly Efficient Solar-Driven Desalination

Carbon coated vermiculite aerogels by quick pyrolysis as cost-effective and scalable solar evaporators

Scalable Ultralight Wood-Inspired Aerogel with Vertically Aligned Micrometer Channels for Highly Efficient Solar Interfacial Desalination

Design of a Pyrrole/Polyimide fiber-based Janus aerogel to suppress salt deposition and enhance solar steam generation performance

Watermelon flesh‐derived carbon aerogel with hierarchical porous structure for interfacial solar steam generation

A 3D aerogel evaporator for efficient solar interfacial evaporation: Breaking through the upper limit of steam production rate

Amphipathic Janus Nanofibers Aerogel for Efficient Solar Steam Generation

Pickering Emulsion Templated 3D Cylindrical Open Porous Aerogel for Highly Efficient Solar Steam Generation

Nanocellulose‐Based Interfacial Solar Evaporator: Integrating Sustainable Materials and Micro‐/Nano‐Architectures for Solar Desalination

Bioinspired Aerogel with Vertically Ordered Channels and Low Water Evaporation Enthalpy for High‐Efficiency Salt‐Rejecting Solar Seawater Desalination and Wastewater Purification

Easy Access to Robust Rigid SiO2-based Photothermal Aerogel for Enhanced Solar Interfacial Evaporation

Bio-inspired molybdenum carbide/carbon-based aerogel with advanced thermal management as a solar evaporator