Abstract:Nowadays, companies and researchers are concerned about the negative consequences of using synthetic polymers and direct their efforts to create new alternatives such as biocomposites. This study investigated the effect of biobased SiO2 on the properties of poly(L-lactic acid)/SiO2 (PLLA/SiO2) and poly(L-lactic acid)/SiO2/poly(ethylene glycol) (PLLA/SiO2/PEG) composites. The SiO2 was obtained from rice husk incineration and mixed with PLLA at various concentrations (5, 10, and 15 wt.%) via melt extrusion before compression molding. Furthermore, PLLA/SiO2/PEG composites with various PEG concentrations (0, 3, 5, and 10 wt.%) with 10 wt.% SiO2 were produced. The sample morphology was studied by scanning electron microscopy (SEM) to analyze the dispersion/adhesion of SiO2 in the polymer matrix and differential scanning calorimetry (DSC) was used under isothermal and non-isothermal conditions to study the thermal properties of the samples, which was complemented by thermal stability study using thermogravimetric analysis (TGA). Rheological analysis was performed to investigate the viscoelastic behavior of the composites in the melt state. At the same time, tensile mechanical properties were obtained at room temperature to determine their properties in the solid state. DSC and X-ray diffraction analysis (XRD) were combined to determine the crystalline state of the samples. Finally, gas permeation measurements were performed using a variable pressure (constant volume) method to analyze the permeability of different gases (CO2, CH4, O2, and H2). The results showed that SiO2 decreased the PLLA chain mobility, slowing the crystallization process and lowering the gas permeability while increasing Young’s modulus, thermal stability, and viscosity. However, PEG addition increased the crystallization rate compared to the neat PLLA (+40%), and its elongation at break (+26%), leading to more flexible/ductile samples. Due to improved silica dispersion and PLLA chain mobility, the material’s viscosity and gas permeability (+50%) were also improved with PEG addition. This research uses material considered as waste to improve the properties of PLA, obtaining a material with the potential to be used for packaging.

Role of extracted nanosilica from rice husk on the structure, property and biodegradability of low density polyethylene/starch biodegradable film

The structure and properties of a starch-based biodegradable film

Hydrophobicity and Biodegradability of Silane-Treated Nanocellulose in Biopolymer for High-Grade Packaging Applications

A mechanochemical approach for synthesizing almond shell nanoparticles and their potential application on the enhancement of polylactic acid film properties

Development of low density polyethylene/sago based biofilm via blow film molding technique

Pearl millet starch-based nanocomposite films reinforced with Kudzu cellulose nanocrystals and essential oil: Effect on functionality and biodegradability

Preparation and characterization of crystalline poly(L‐lactic acid)/silica nanocomposite films with high ductility and gas barrier properties

Study of Renewable Silica Powder Influence in the Preparation of Bioplastics from Corn and Potato Starch

Processing Polymer Blends of Mater-Bi® and Poly-L-(Lactic Acid) for Blown Film Application with Enhanced Mechanical Strength

Effects of Plasticizers and Clays on the Physical, Chemical, Mechanical, Thermal, and Morphological Properties of Potato Starch-Based Nanocomposite Films

Assessment and Optimization of Thermal Stability and Water Absorption of Loading Snail Shell Nanoparticles and Sugarcane Bagasse Cellulose Fibers on Polylactic Acid Bioplastic Films

Augmenting barrier efficiency in clay‐based starch composite films for enhanced packaging sustainability

Effect of different nanofillers incorporation on HDPE/LDPE films nanocomposite

Accelerated hydrolysis and degradation of polylactide nanocomposites using loaded silica nanocarriers

Effect of Biobased SiO2 on the Morphological, Thermal, Mechanical, Rheological, and Permeability Properties of PLLA/PEG/SiO2 Biocomposites

Preparation and characterization of biobased hybrid nanocomposite of Polyvinyl chloride/thermoplastic starch with Mg–Al layered double hydroxide and waste rice husk ash

Soil burial degradation of bio-composite films from poly(lactic acid), natural rubber, and rice straw

Citric acid crosslinked ternary blended (polyvinyl alcohol, lignin, lemongrass essential oil/nanoemulsions) biopolymeric hydrogel films: structural, functional, antioxidant, antifungal and biodegradable properties

In situ degradation of low-density polyethylene film in irrigation maize field: Thickness-dependent effect

Poly(lactic acid)/poly(butylene adipate-co-terephthalate) films reinforced with polyhedral oligomeric silsesquioxane nanoparticles: a morphological, mechanical, and thermal study

Structure and Properties of Nanosilica Reinforced Biodegradable Polyester Elastomers