Abstract:Nitrogen dioxide (NO 2 ) is a typical reactive nitrogen species harmful to health and the environment. However, NO 2 sensors still suffer from low sensitivity and poor response/recovery rates. Herein, 3D In 2 O 3 assembled by stacked nanosheets were prepared and modified with N element-doped GQDs (N-GQDs) and Fe, N co-doped GQDs (Fe,N-GQDs), respectively. The results of NO 2 -sensing performance indicated that the optimal sample (0.3 wt% Fe,N-GQDs/In 2 O 3 ) showed a high response of 414.5 to 1 ppm NO 2 and could detect as low as 10 ppb at 50°C, which was 1.3 and 4.0 times higher than that of 0.3 wt% N-GQDs/In 2 O 3 and In 2 O 3 , respectively. The gas-sensing kinetics were analyzed by establishing gas adsorption/desorption isotherms. The enhanced NO 2 sensing properties of 0.3 wt% Fe,N-GQDs/In 2 O 3 were mainly due to the enhanced active site accessibility of stacked nanosheets with open layer spaces, the heterointerface between Fe,N-GQDs and In 2 O 3 , and electrical modulation of Fe,N-GQDs. Additionally, A pulse-driving circuit was designed for a pulse temperature modulation (PTM) strategy to further boost NO 2 detection. The sensor response is further enhanced by 1.7 times, and the response/recovery time is reduced by 42.5%/60.1%. The NO 2 concentration in vehicle exhaust was determined using PTM mode with good spike recoveries. It validated the reliability of the sensor for the quantitative detection of NO 2 in the real environment. This work provides insights into sensor design and has the potential to contribute to the development of novel sensing platforms for other gas pollutants.

Mesoporous Fe-doped In2O3 nanorods derived from metal organic frameworks for enhanced nitrogen dioxide detection at low temperature

Metal‐Organic Frameworks‐Derived Porous In2O3 Hollow Nanorod for High‐Performance Ethanol Gas Sensor

Metal-Organic Framework-Derived Ni-Doped Indium Oxide Nanorods for Parts per Billion-Level Nitrogen Dioxide Gas Sensing at High Humidity

Unraveling the promoted nitrogen dioxide detection performance of N-doped SnO2 microspheres at low temperature

ZIF-derived Nanoparticles Modified ZnO Nanorods Hierarchical Structure for Conductometric NO2 Gas Sensor

Superior NO 2 Sensing of MOF-Derived Indium-Doped ZnO Porous Hollow Cages

Two-dimensional Cd-doped Porous Co3O4 Nanosheets for Enhanced Room-Temperature NO2 Sensing Performance

Mesoporous In 2 O 3 /ZnO heterogeneous microtubes replicated from waste willow catkins for high response and rapid detection of NO 2 gas at low temperature

Metal-Organic Framework-Derived Au-Doped In2O3 Nanotubes for Monitoring CO at the ppb Level

Fast responding and recovering of NO2 sensors based on Ni-doped In2O3 nanoparticles

Pt nanoparticle-functionalized Fe2(MoO4)3 hollow microspheres for parts-per-billion NO2 sensors operated at 80 °C

Rapid and accurate detection of highly toxic NO2 gas based on catkins biomass-derived porous In2O3 microtubes at low temperature

Metal–Organic Framework-Derived Cuo Tube-Like Nanofibers with High Surface Area and Abundant Porosities for Enhanced Room-Temperature No2 Sensing Properties

Enhanced NO2 Gas Sensing Properties Based on Rb-doped Hierarchical Flower-Like In2O3 Microspheres at Low Temperature

Pompon-like Ni doped ZnO mesoporous microspheres for conductometric NO 2 sensing properties at room temperature

Nickel-doped indium oxide ultrafine nanoparticles for ppb-level nitrogen dioxide detection

Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

Cu-MOF-74-derived Cu2O/CuO-C nanocomposite as an effective chemiresistive sensor for detection of NO2 at room temperature

High-performance NO 2 gas sensor enabled by Fe, N co-doped GQDs modification and pulse-driven temperature modulation

SnO 2 Nanosheets for NIR-Enhanced NO 2 Sensing and Adsorption/Desorption

Ultrasensitive Ppb-Level NO2 Gas Sensor Based on WO3 Hollow Nanosphers Doped with Fe