Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

Slip-Line Solution for the Active Earth Pressure of Narrow and Layered Backfills against Inverted T-Type Retaining Walls Rotating about the Base

Active Earth Pressure Acting on Retaining Wall Considering Anisotropic Seepage Effect

Analysis of Passive Earth Pressure Modification Due to Seepage Flow Effects

A method of analyzing a retaining structure considering earth pressure fully coupled with deformation

Computation of active earth pressure under non-limit state for retaining wall with mode of translation

Slip-Line Solution to Earth Pressure of Narrow Backfill against Retaining Walls on Yielding Foundations

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

Active Earth Pressure of Narrow Backfill on Inverted T-Type Retaining Walls under Translation Mode

Active Earth Pressure against Inverted T-Type Retaining Walls under Translation Mode

Slip-line solution to seismic active earth pressure of narrow c-φ soils on gravity walls rotating about the bottom

Passive earth pressure of narrow cohesionless backfill against inclined rigid retaining walls under translation mode

Analysis Of Active Earth Pressure On Rigid Retaining Walls Considering Soil Arching

Distribution of Active Earth Pressure Acting on Retaining Walls with Soil Placed in Layers and Considering the Displacement of Wall

Passive Earth Pressure of Narrow Cohesionless Backfill Against Rigid Retaining Walls Rotating About the Base

Active earth pressure of narrow cohesive backfill on rigid retaining wall of rotation about the bottom

Active earth pressures against rigid retaining walls with narrow cohesive backfill

Solution of Problem of Earth Pressure on Retaining Wall Calculated by Method of Soil Arching Effect

Semianalytical Solution for Earth Pressure of Narrow Granular Backfill with a Log-Spiral Failure Surface behind Retaining Walls under Translational Mode

Calculation of Active Earth Pressure for Narrow Backfill with a Curved Slip Surface

Study of Passive Earth Pressures Against Translating Rigid Retaining Walls in Narrow Excavations

Active failure mechanism and earth pressure of narrow backfill behind retaining structures