Abstract:The operation of the Optimization of Liquid Metal Advanced Targets (OLMAT) facility began in April 2021 with the scientific objective of exposing liquid-metal plasma facing components (PFCs) to the particle and power fluxes provided by one of the hydrogen neutral beam injectors of the TJ-II stellarator. The system can deliver heat fluxes from 5 to 58 MW m −2 of high energy hydrogen neutral particles (≤ 33 keV) with fluxes up to 10 22 m 2 s −1 (containing an ion fraction ≤ 33% in some instances), pulsed operation of 30–150 ms duration and repetition rates up to 2 min −1 . These characteristics enable OLMAT as a high heat flux (HHF) facility for PFC evaluation in terms of power exhaust capabilities, thermal fatigue and resilience to material damage. Additionally, the facility is equipped with a wide range of diagnostics that includes tools for analyzing the thermal response of the targets as well as for monitoring atomic/plasma physics phenomena. These include spectroscopy, pyrometry, electrical probing and visualization (fast and IR cameras) units. Such particularities make OLMAT a unique installation that can combine pure technological PFC research with the investigation of physical phenomena such as vapor shielding, thermal sputtering, the formation/characterization of plasma plumes with significant content of evaporated metal and the detection of impurities in front of the studied targets. Additionally, a myriad of surface characterization techniques as SEM/EDX for material characterization of the exposed PFC prototypes are available at CIEMAT. In this article, first we provide an overview of the current facility upgrade in which a high-power CW laser, that can be operated in continuous and pulsed modes (0.2–10 ms), dump and electrical (single Langmuir) probe embedded on the target surface have been installed. This laser operation will allow simulating more relevant heat loading scenarios such as nominal steady-state divertor heat fluxes (10–20 MW m −2 in continuous mode) and transients including ELM loading and disruption-like events (ms time scales and power densities up to GW m −2 range). The work later focuses on the more recent experimentation (2022 fall campaign) where a 3D printed Tungsten (W) Capillary Porous System (CPS) target, with approximated 30 μm pore size and a 37% porosity and filled with liquid tin. This porous surface was a mock-up of the PFC investigated in the ASDEX Upgrade divertor manipulator. The target composed with this element was eventually exposed to a sequence of shots with the maximum heat flux that OLMAT provides (58 ± 14 MWm −2 ). Key questions as resilience to dry-out and particle ejection of the liquid metal layer, its refilling, the induced damage/modification of the porous W matrix and the global performance of the component are addressed, attempting to shed light on the issues encountered with the PFC at tokamak scale testing.

Scaling of HeatLMD-simulated impurity outflux from COMPASS-U liquid metal divertor

Divertor Heat Flux Mitigation Using Supersonic Molecular Beam Injection in Type-Iii Elmy H Mode Plasmas of Hl-2a Tokamak

Experimental, Numerical and Analytical Evaluation of J×b -Thrust for Fast-Liquid-metal-flow Divertor Systems of Nuclear Fusion Devices

Predictive modeling of a lithium vapor box divertor in NSTX-U using SOLPS-ITER

Analysis and design of Fast Flow Liquid Li Divertor for Fusion Nuclear Science Facility (FNSF) using coupled plasma boundary and LM MHD/heat transfer codes

Optimization of lithium vapor box divertor evaporator location on NSTX-U using SOLPS-ITER

Influence of hydrogen content in tokamak scrape-off-layer on performance of lithium divertor

Scaling of L-mode Heat Flux for ITER and COMPASS-U Divertors, Based on Five Tokamaks

A comparative study of the effects of liquid lithium and tin as DEMO divertor targets on the heat loads and SOL properties

Parametric scaling of power exhaust in EU-DEMO alternative divertor simulations

A Long-Pulse Small Edge-Localized-mode High-Confinement Plasma with Detachment Feedback Control by Floating Potential in an Experimental Advanced Superconducting Tokamak in a Metal Wall Environment

Simulation of lithium flow, redeposition, and vapor shielding in liquid lithium divertor of T-15MD tokamak with SOLPS 4.3 code

Active Radiative Liquid Lithium Divertor for Handling Transient High Heat Flux Events

First integrated core-edge fluid simulation of ITER's Limiter–Divertor transition with SolEdge-HDG

Compatibility of divertor detachment and ELM suppression in DIII-D high-βp plasmas with ITER-similar shape

Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D

Fluid turbulence simulations of divertor heat load for ITER hybrid scenario using BOUT++

Error Analysis and Cazlibration of Langmuir Probes Embedded in ITER-like Tungsten Divertor on EAST

Physics and Technology Research for Liquid-Metal Divertor Development, Focused on a Tin-Capillary Porous System Solution, at the OLMAT High Heat-Flux Facility

Physics of the low momentum diffusivity regime in tokamaks and its experimental applicability

Experimental Scaling of Divertor Heat and Particle Flux Widths in East L-Mode Plasmas