Abstract:Microalgae are new and sustainable sources of starch with higher productivity and flexible production modes than conventional terrestrial crops, but the downstream processes need further development. Here, ultrasonication (with power of 200 W or 300 W and duration of 10, 15, 20, or 25 min) was applied to simultaneously extract and modify starch from a marine microalga Tetraselmis subcordiformis for reducing the digestibility, and an aqueous two-phase system (ATPS) of ethanol/NaH2PO4 was then used to isolate the starches with varied properties. Increasing ultrasonic duration facilitated the partition of starch into the bottom pellet, while enhancing the ultrasonic power was conducive to the allocation in the interphase of the ATPS. The overall starch recovery yield reached 73 ∼ 87 % and showed no significant difference among the ultrasonic conditions tested. The sequential ultrasonication-ATPS process successfully enriched the starch with purities up to 65 % ∼ 88 %, which was among the top levels reported in microalgal starch isolated. Ultrasonication produced more amylose which was mainly fractionated into the interface of the ATPS. The digestibility of the starch was altered under different ultrasonic conditions and varied from different ATPS phases as well, with the one under the ultrasonic power of 200 W for 15 min at the bottom pellet having the highest resistant starch content (RS, 39.7 %). The structural and compositional analysis evidenced that the ultrasonication-ATPS process could exert impacts on the digestibility through altering the surface roughness and fissures of the starch granules, modulating the impurity compositions (protein and lipid) that could interact with starch, and modifying the long- and short-range ordered structures. The developed ultrasonication-ATPS process provided novel insights into the mechanism and strategy for efficient production of functional starch from microalgae with a potential in industrial application.

From raw microalgae to bioplastics: conversion of starch granules into thermoplastic starch

From raw microalgae to bioplastics: Conversion of Chlorella vulgaris starch granules into thermoplastic starch

Cross-Linked Amylose Bio-Plastic: A Transgenic-Based Compostable Plastic Alternative

Exploring different processes for starch extraction from microalgae and synthesis of starch-chitosan plastic films

Characterization of biodegradable composite based on microalgae modified glycerol‐plasticized‐starch films

Microalgae in Bioplastic Production: A Comprehensive Review

Starch Rich Chlorella vulgaris: High-Throughput Screening and Up-Scale for Tailored Biomass Production

Novel High‐Strength Thermoplastic Starch Reinforced by in Situ Poly(lactic Acid) Fibrillation

Thermoplastic Starch Processed under Various Manufacturing Conditions: Thermal and Electrical Properties

Revalorization of Microalgae Biomass for Synergistic Interaction and Sustainable Applications: Bioplastic Generation

Ultrasonication followed by aqueous two-phase system for extraction, on-site modification and isolation of microalgal starch with reduced digestibility

Thermoplastic Starch Processing and Characteristics—A Review

Thermal Decomposition of Bio-Based Plastic Materials

Green composites based on thermoplastic starch reinforced with micro- and nano-cellulose by melt blending - A review

Microalgae-based bioplastics: Future solution towards mitigation of plastic wastes

Influence of Choline Chloride/Urea and Glycerol Plasticizers on the Mechanical Properties of Thermoplastic Starch Plastics

Impact of Bioplastic Design on Biodigestion Treatment

Chemical and Physical Mechanism and Method of Preparation of Thermoplastic Starch

Screening and Optimization of Microalgae Biomass and Plastic Material Coprocessing by Hydrothermal Liquefaction

Freely Moldable Modified Starch As a Sustainable and Recyclable Plastic

Feasibility of bioplastic production using micro- and macroalgae- A review