Abstract:Synthetic aperture imaging methods have been employed widely in recent research in non-destructive testing (NDT), but uptake has been more limited in medical ultrasound imaging. Typically offering superior focussing power over more traditional phased array methods, these techniques have been employed in NDT applications to locate and characterise small defects within large samples, but have rarely been used to image surfaces. A desire to ultimately employ ultrasonic surface imaging for bone surface geometry measurement prior to surgical intervention motivates this research, and results are presented for initial laboratory trials of a surface reconstruction technique based on global thresholding of ultrasonic 3D point cloud data. In this study, representative geometry artefacts were imaged in the laboratory using two synthetic aperture techniques; the Total Focusing Method (TFM) and the Synthetic Aperture Focusing Technique (SAFT) employing full and narrow synthetic apertures, respectively. Three high precision metallic samples of known geometries (cuboid, sphere and cylinder) which featured a range of elementary surface primitives were imaged using a 5MHz, 128 element 1D phased array employing both SAFT and TFM approaches. The array was manipulated around the samples using a precision robotic positioning system, allowing for repeatable ultrasound derived 3D surface point clouds to be created. A global thresholding technique was then developed that allowed the extraction of the surface profiles, and these were compared with the known geometry samples to provide a quantitative measure of error of 3D surface reconstruction. The mean errors achieved with optimised SAFT imaging for the cuboidal, spherical and cylindrical samples were 1.3mm, 2.9mm and 2.0mm respectively, while those for TFM imaging were 3.7mm, 3.0mm and 3.1mm, respectively. These results were contrary to expectations given the higher information content associated with the TFM images. However, it was established that the reduced error associated with the SAFT technique was associated with significant reductions in side lobe levels of approximately 24dB in comparison to TFM imaging, although this came at the expense of reduced resolution and coverage.

Frequency Sub-Sampling of Ultrasound Non-Destructive Measurements: Acquisition, Reconstruction and Performance

3-D Ultrasonic Image Reconstruction in Frequency Domain Using a Virtual Transducer Model.

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

A Model-Based Regularized Inverse Method for Ultrasonic B-scan Image Reconstruction

Frequency-domain Synthetic Aperture Focusing for Helical Ultrasonic Imaging

Deep Learning-Based Optimal Spatial Subsampling in Ultrasound Nondestructive Testing

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Data-Driven Subsampling Matrices Design for Phased Array Ultrasound Nondestructive Testing

Fully Noncontact Hybrid NDT for 3D Defect Reconstruction Using SAFT Algorithm and 2D Apodization Window

Real-time 3D imaging with Fourier-domain algorithms and matrix arrays applied to non-destructive testing

Performance of laser-ultrasonic F-SAFT imaging

Quantitative Comparison of the Total Focusing Method, Reverse Time Migration, and Full Waveform Inversion for Ultrasonic Imaging

Ultrasonic imaging algorithms with limited transmission cycles for rapid nondestructive evaluation

Efficient Frequency-Domain Synthetic Aperture Focusing Techniques for Imaging With a High-Frequency Single-Element Focused Transducer

Deep Unfolded Recovery of Sub-Nyquist Sampled Ultrasound Image

Fast 3-D Ultrasonic Imaging Using Time-Domain Synthetic Aperture Focusing Techniques Based on Circular Scan Conversions

Investigation of synthetic aperture methods in ultrasound surface imaging using elementary surface types

Model-Based Iterative Reconstruction for One-Sided Ultrasonic Non-Destructive Evaluation

Image reconstruction algorithm for laser-induced ultrasonic imaging: The single sensor scanning synthetic aperture focusing technique

Improve Spatial Resolutions of Ultrasonic Phased-Array Inspection Using SAFT

Sub-Nyquist Sampling and Fourier Domain Beamforming in Volumetric Ultrasound Imaging