Abstract:This paper presents a comprehensive review of diamond electronics from the RF perspective. Our aim was to find and present the potential, limitations and current status of diamond semiconductor devices as well as to investigate its suitability for RF device applications. While doing this, we briefly analysed the physics and chemistry of CVD diamond process for a better understanding of the reasons for the technological challenges of diamond material. This leads to Figure of Merit definitions which forms the basis for a technology choice in an RF device/system (such as transceiver or receiver) structure. Based on our literature survey, we concluded that, despite the technological challenges and few mentioned examples, diamond can seriously be considered as a base material for RF electronics, especially RF power circuits, where the important parameters are high speed, high power density, efficient thermal management and low signal loss in high power/frequencies. Simulation and experimental results are highly regarded for the surface acoustic wave (SAW) and field emission (FE) devices which already occupies space in the RF market and are likely to replace their conventional counterparts. Field effect transistors (FETs) are the most promising active devices and extremely high power densities are extracted (up to 30 W/mm). By the surface channel FET approach 81 GHz operation is developed. Bipolar devices are also promising if the deep doping problem can be solved for operation at room temperature. Pressure, thermal, chemical and acceleration sensors have already been demonstrated using micromachining/MEMS approach, but need more experimental results to better exploit thermal, physical/chemical and electronic properties of diamond.

Computationally Assessing Diamond as an Ultrafast Pulse Shaper for High Power Ultrawide Band Radar

Simulation of Pulse Sharpening Mechanism of Vertical Diamond Avalanche Diode

High Voltage Schottky Barrier Diodes In Synthetic Single Crystal Diamond

Optically Triggered Schottky Barrier Diodes in Single Crystal Diamond

Demonstration of Picosecond 4H-SiC Diode Avalanche Shaper With Voltage Rise Rate of 11.14 kV/ns and Peak Power Density of 62 MW/cm$^2$

Diamond for High-Power, High-Frequency, and Terahertz Plasma Wave Electronics

Diamond Schottky Diodes For Power Conversion

Ramp Oxide Termination Structure Using High-K Dielectrics for High Voltage Diamond Schottky Diodes

Single Crystal Diamond M-i-P Diodes for Power Electronics.

Diamond semiconductor technology for RF device applications

Numerical Parameterization of Chemical-Vapor-Deposited (CVD) Single-Crystal Diamond for Device Simulation and Analysis

A Dawn for Carbon Electronics?

High Conductivity δ-Doped Single Crystal Diamond Schottky m-i-p+ Diodes

DDS Based Radar Signal Generator for Microwave Remote Sensing

Impact of High-k Dielectrics on Breakdown Performances of SiC and Diamond Schottky Diodes

Diamond avalanche diodes for obtaining high-voltage pulse with subnanosecond front edge

Design of Diamond Power Devices: Application to Schottky Barrier Diodes

Diamond semiconductor and elastic strain engineering

Surface Texturing of CVD Diamond Assisted by Ultrashort Laser Pulses

First-principles simulation of intense single-cycle ultrashort light pulses interacting with diamond: Comparison study in attosecond and femtosecond regimes

A Review of Diamond Materials and Applications in Power Semiconductor Devices