Understanding the physics of coherent LiDAR

Alexander Y. Piggott

DOI: https://doi.org/10.48550/arXiv.2011.05313

2022-01-22

Abstract:Coherent LiDAR (Light Detecting And Ranging) is a promising 3D imaging technology that provides significant advantages over more traditional LiDAR systems. In addition to being immune to ambient light, it directly measures the velocity of moving objects by sensing Doppler shift of light, and can achieve exceptional depth accuracies. The goal of this manuscript is to explain the basic physics of coherent LiDAR with rigorous derivations from first principles. We first discuss the sensitivity of coherent detection, and derive the number of photons needed to robustly detect a LiDAR return. We then turn our attention to the collection efficiency of coherent LiDAR, and show that signal strength is strongly dependent upon how well the laser beams are focused.

Applied Physics,Image and Video Processing

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly focus on two aspects:

1. **Sensitivity of Coherent LiDAR**:
- The paper discusses the sensitivity issue of coherent LiDAR, that is, how many photons need to be collected in order to detect the target. Specifically, by analyzing the performance of the coherent detector at the single - photon level, the paper explains how coherent LiDAR can operate at an extremely low number of photons and reach the shot noise limited regime. In this regime, the signal - to - noise ratio (SNR) of the system depends only on the number of collected photons. The paper derives in detail the relationship between the signal and noise in the coherent LiDAR system and concludes that the SNR is proportional to the number of collected photons.

2. **Collection efficiency of Coherent LiDAR**:
- The paper also studies the collection efficiency problem of coherent LiDAR, that is, how many photons returning from the target can be detected by the system. Since coherent LiDAR can only detect light in a single optical mode, its collection efficiency is severely limited. By analyzing the coupling efficiency of scattered light entering the single - mode waveguide, the paper derives an expression for the average optical power collected by coherent LiDAR from a diffusely - reflecting target. The analysis in this part shows that the collection efficiency of coherent LiDAR is very low because only a very small fraction of the scattered light can be detected by the system.

### Specific problem analysis

#### Sensitivity problem
- **Background**: Traditional amplitude - modulated LiDAR is usually affected by detector dark current, amplifier noise, and ambient light, resulting in its low sensitivity. Coherent LiDAR, on the other hand, can significantly improve the system's sensitivity by using coherent detection techniques, making it close to the quantum noise limit.
- **Key points**: The signal - to - noise ratio (SNR) of coherent LiDAR depends only on the number of collected photons at the quantum noise limit. Through detailed mathematical derivations, the paper shows that in an ideal case, the SNR is equal to the number of collected photons \( N \), that is, \( \text{SNR}=N \). This means that coherent LiDAR can operate at a very low number of photons, but in practical applications, usually dozens of photons are required to achieve reliable detection.

#### Collection efficiency problem
- **Background**: One fundamental limitation of coherent LiDAR is that it can only detect light in a single optical mode. This makes its collection efficiency much lower than that of traditional direct - detection LiDAR. By analyzing the light - field overlap integral in the single - mode waveguide, the paper derives an expression for the average optical power collected by coherent LiDAR from a diffusely - reflecting target.
- **Key points**: The paper points out that the average optical power \( \langle P \rangle \) collected by coherent LiDAR from a diffusely - reflecting target can be expressed as:
\[
\langle P \rangle=\frac{\lambda^{2}I}{2\pi}
\]
where \( I \) is the intensity of the scattered light on the target surface and \( \lambda \) is the wavelength of the light. Since the wavelength of light is very short (about \( 10^{-6} \) meters), only a very small fraction of the scattered light can be detected by the system. In addition, for a single - static - configuration coherent LiDAR, the average optical power can be further expressed as:
\[
\langle P \rangle=\frac{\lambda^{2}P_{s}}{2\pi A_{\text{eff}}}
\]
where \( P_{s} \) is the total power of the scattered light and \( A_{\text{eff}} \) is the effective area of the beam. This indicates that in order to improve the performance of coherent LiDAR, the transmitting and receiving beams need to be focused very tightly.

### Summary
Through detailed physical analysis and mathematical derivations, the paper solves the problems of the sensitivity and collection efficiency of coherent LiDAR. These analyses not only help to understand the working principle of coherent LiDAR but also provide a theoretical basis for designing high - performance coherent LiDAR systems.