Abstract:Individual Pitch Control (IPC) is an effective and widely-used strategy to mitigate blade loads in wind turbines. However, conventional IPC fails to cope with blade and actuator faults, and this situation may lead to an emergency shutdown and increased maintenance costs. In this paper, a Fault-Tolerant Individual Pitch Control (FTIPC) scheme is developed to accommodate these faults in Floating Offshore Wind Turbines (FOWTs), based on a Subspace Predictive Repetitive Control (SPRC) approach. To fulfill this goal, an online subspace identification paradigm is implemented to derive a linear approximation of the FOWT system dynamics. Then, a repetitive control law is formulated to attain load mitigation under operational conditions, both in healthy and faulty conditions. Since the excitation noise used for the online subspace identification may interfere with the nominal power generation of the wind turbine, a novel excitation technique is developed to restrict excitation at specific frequencies. Results show that significant load reductions are achieved by FTIPC, while effectively accommodating blade and actuator faults and while restricting the energy of the persistently exciting control action.

What problem does this paper attempt to address?

### What problems does this paper attempt to solve? This paper aims to solve the aerodynamic asymmetry problems caused by blade and pitch actuator failures in Floating Offshore Wind Turbines (FOWTs). Specifically, traditional Individual Pitch Control (IPC) cannot deal with these failures, which may lead to emergency shutdowns and increased maintenance costs. To solve these problems, this paper develops a Fault - Tolerant Individual Pitch Control (FTIPC) scheme based on Subspace Predictive Repetitive Control (SPRC). #### Main problems include: 1. **Limitations of traditional IPC**: Traditional IPC cannot handle blade and pitch actuator failures. Especially in deep - sea environments, FOWTs may face complex wind - wave loads, resulting in mechanical and electrical failures. 2. **Pitch control system failures**: The pitch control system is the main means to optimize power generation and reduce blade loads, but its failure rate is relatively high (about 21.3%), especially the serious Pitch Actuator Stuck (PAS) failure, which will lead to a complete loss of control authority, and the non - serious Pitch Actuator Degradation (PAD) failure. 3. **Aerodynamic asymmetry caused by blade failures**: Blade structural failures (such as cracks, delamination or fiber breakage) will cause aerodynamic asymmetry, which has a more significant impact on FOWTs because they have larger rated power and more complex blades. 4. **Deficiencies of existing fault - tolerant control strategies**: - Only PAD - type failures are considered, and PAS - type failures are not involved. - There is a lack of fault - tolerant strategies for blade failures. - The applicability of existing methods on FOWTs is limited, and their aerodynamic, hydrodynamic, actuator, mooring and structural dynamic characteristics are not fully considered. ### Solutions: To address the above problems, this paper proposes a data - driven adaptive FTIPC scheme, specifically including: - **Control strategy based on SPRC**: Obtain a linear approximation of the wind turbine dynamics through online subspace identification, and on this basis, formulate a repetitive control law to reduce loads under healthy and faulty conditions. - **Limited - excitation technology**: Develop a new excitation technology to concentrate the excitation energy at specific frequencies (such as 1P and 2P frequencies) to avoid having a significant impact on nominal power generation. - **Automatic model parameter identification**: When a blade or pitch actuator fails, automatically identify the Markov matrix of each blade and incorporate the fault dynamics into the linear model. - **Adaptive fault - tolerant repetitive control input**: According to the identified model parameters, formulate an adaptive fault - tolerant repetitive control input to reduce the load caused by the fault. Through a series of case studies, the effectiveness of the proposed FTIPC scheme under different operating conditions and fault scenarios has been verified.

Fault-Tolerant Individual Pitch Control of Floating Offshore Wind Turbines via Subspace Predictive Repetitive Control

Fast Adaptive Fault Accommodation in Floating Offshore Wind Turbines via Model-Based Fault Diagnosis and Subspace Predictive Repetitive Control

Periodic Load Rejection for Floating Offshore Wind Turbines via Constrained Subspace Predictive Repetitive Control

Adaptive Nonlinear Power Regulation Control of Floating Wind Turbines with Platform Motion Reduction

Load reduction for wind turbines: an output-constrained, subspace predictive repetitive control approach

Inverse Optimal Adaptive Neural Power Regulation Control for Variable-Speed Wind Turbines with Load Mitigation

Load Reduction for Two-Bladed Horizontal-Axis Tidal Current Turbines Based on Individual Pitch Control

Real-Time Repositioning of Floating Wind Turbines Using Model Predictive Control for Position and Power Regulation

IPC‐based robust disturbance accommodating control for load mitigation and speed regulation of wind turbines

LIDAR‐assisted feedforward individual pitch control of a 15 MW floating offshore wind turbine

A Model Reference Adaptive Control Framework for Floating Offshore Wind Turbines with Collective and Individual Blade Pitch Strategy

Effective Wind Speed Estimation and Prediction Based Feedforward Feedback Pitch Control for Wind Turbines.

Optimal and Robust Fault Tolerant Control of Wind Turbines Working under Sensor, Actuator, and System Faults

Asymmetric Load Control Method for Individual Pitch of Horizontal Axis Marine Current Turbine

Adaptive Continuous Neural Pitch Angle Control for Variable‐Speed Wind Turbines

Hybrid Intelligent Feedforward-Feedback Pitch Control for VSWT with Predicted Wind Speed

Data-driven repetitive control: Wind tunnel experiments under turbulent conditions

Incremental Feedforward Collective Pitch Control Method for Wind Turbines

Multi-objective Performance Enhancement of Offshore Wind Turbines Through Planning Controller Parameter: A ‘Plan-Control’ Hierarchical Controller

Wind Turbine Fault-Tolerant Control via Incremental Model-Based Reinforcement Learning

Observer-Based Robust Fault Predictive Control for Wind Turbine Time-Delay Systems with Sensor and Actuator Faults