Abstract:For reliable and practical application of structural health monitoring approaches in conjunction with dense sensor arrays deployed on 'smart' systems, there is a need to develop and evaluate alternate strategies for efficient problem decomposition to rapidly and accurately determine the occurrence, location and level of small changes in the underlying structural characteristics of a monitored system based on its vibrational signature. Furthermore, there is also a need to quantify the level of uncertainties in the identified system characteristics so as to have a measurable level of confidence in the parameters to be relied on for the detection of genuine changes (damage) in the monitored system. This study presents the results of two time-domain identification techniques applied to a full-scale 17-story building, based on ambient vibration measurements. The Factor building is a steel frame structure located on the UCLA campus. This building was instrumented permanently with a dense array of 72-channel accelerometers, and the acceleration data are being continuously recorded. The first identification method used in this study is the NExT/ERA, which is regarded as a global (or centralized) approach, since it deals with the global dynamic properties of the structure. The second method is a time-domain identification technique for chain-like MDOF systems. Since in this method the identification of each link of the chain is performed independently, it is regarded as a local (or decentralized) identification methodology. For the same reason, this method can be easily adopted for large-scale sensor network architectures in which the centralized approaches are not feasible due to massive storage, power, bandwidth and computational requirements. To have a statistically meaningful results, 50 days of recorded data are considered in this study. The modal parameter and chain identification procedures are performed over time windows of 2 h each and with 50% overlap. Using the NExT/ERA method, 12 dominant modes of the building were identified. It was observed that variations in the frequency estimation are relatively small; the coefficient of variation is about 1–2% for most of the estimated modal frequencies. Chain system identification was successfully implemented using the output-only data acquired from the Factor building. Probability distributions of the estimated coefficients of displacement and velocity terms in the interstory restoring functions (which are the mass-normalized local stiffness and damping values) that were found based on the chain system identification are presented. The variability of the estimated parameters due to temperature fluctuations is investigated. It is shown that there is a strong correlation between the modal frequency variations and the temperature variations in a 24 h period.

Determining minimum number of required accelerometer for output-only structural identification of frames

Output-only Modal Identification of beams with different boundary condition

Identification of Earthquake Ground Motion Based on Limited Acceleration Measurements of Structure Using Kalman Filtering Technique

A refined output-only modal identification technique for structural health monitoring of civil infrastructures

A reduced modal parameter based algorithm to estimate excitation forces from optimally placed accelerometers

Fully Automated Operational Modal Identification Based on Scale-Space Peak Picking Algorithm and Power Spectral Density Estimation

A novel approach for the structural identification and monitoring of a full-scale 17-story building based on ambient vibration measurements

Automated operational modal analysis based on long‐term records: A case study of Milad Tower structural health monitoring

Effect of noise on output-only modal identification of beams

Modal Analysis of a Vertically Tapered Frame

Operational and Analytical Modal Analysis of a Bridge Using Low-Cost Wireless Arduino-Based Accelerometers

Structural dynamic investigation of frame structure with bolted joints

An Output‐only Structural Condition Assessment Method for Civil Structures by the Stochastic Gradient Descent Method

Damping identification using weighted fitting of Frequency-response-function (WFF) method

Using limited roving sensors to monitor bridge subjected to random traffic load

Automating the Frequency Domain Decomposition Technique Using the Modal Assurance Criterion

Modal Data Identification of the Prestressed Concrete Bridge Using Variational Mode Decomposition

Output-only Modal Identification Based on Hierarchical Hough Transform

Discrete analytical mode decomposition with automatic bisecting frequency selection for structural dynamic response analysis and modal identification

Automatic High-Resolution Operational Modal Identification of Thin-Walled Structures Supported by High-Frequency Optical Dynamic Measurements