Abstract:Purpose: Magnetic resonance (MR) imaging is increasingly being utilized to visualize the 3D temperature distribution in patients during treatment with hyperthermia or thermal ablation therapy. The goal of this work is to lay the foundation for improving the localization of heat in tumors with an online focusing algorithm that uses MR images as feedback to iteratively steer and focus heat into the target. Methods: The algorithm iteratively updates the model that quantifies the relationship between the source (antenna) settings and resulting tissue temperature distribution. At each step in the iterative process, optimal settings of power and relative phase of each antenna are computed to maximize averaged tumor temperature in the model. The MR-measured thermal distribution is then used to update/correct the model. This iterative procedure is repeated until convergence, i.e. until the model prediction and MR thermal image are in agreement. A human thigh tumor model heated in a 140 MHz four-antenna cylindrical mini-annular phased array is used for numerical validation of the proposed algorithm. Numerically simulated temperatures are used during the iterative process as surrogates for MR thermal images. Gaussian white noise with a standard deviation of 0.3 degrees C and zero mean is added to simulate MRI measurement uncertainty. The algorithm is validated for cases where the source settings for the first iteration are based on erroneous models: (1) tissue property variability, (2) patient position mismatch, (3) a simple idealized patient model built from CT-based actual geometry, and (4) antenna excitation uncertainty due to load dependent impedance mismatch and antenna cross-coupling. Choices of starting heating vector are also validated. Results: The algorithm successfully steers and focuses a tumor when there is no antenna excitation uncertainty. Temperature is raised to > or = 43 degrees C for more than about 90% of tumor volume, accompanied by less than about 20% of normal tissue volume being raised to a temperature > or = 41 degrees C. However, when there is antenna excitation uncertainty, about 40% to 80% of normal tissue volume is raised to a temperature > or = 41 degrees C. No significant tumor heating improvement is observed in all simulations after about 25 iteration steps. Conclusions: A feedback control algorithm is presented and shown to be successful in iteratively improving the focus of tissue heating within a four-antenna cylindrical phased array hyperthermia applicator. This algorithm appears to be robust in the presence of errors in assumed tissue properties, including realistic deviations of tissue properties and patient position in applicator. Only moderate robustness was achieved in the presence of misaligned applicator/tumor positioning and antenna excitation errors resulting from load mismatch or antenna cross coupling.

Fast Optimization of Temperature Focusing in Hyperthermia Treatment of Sub-Superficial Tumors

Online feedback focusing algorithm for hyperthermia cancer treatment

Temperature Field Distribution Optimization Of Mfh For Cancer Therapy

Fast temperature optimization of multi-source hyperthermia applicators with reduced-order modeling of 'virtual sources'

Microwave Hyperthermia of Brain Tumors: A 2D Assessment Parametric Numerical Study

Temperature Field Optimization of Nano-Magnetic Fluid Hyperthermia Device

The potential of time-multiplexed steering in phased array microwave hyperthermia for head and neck cancer treatment

Temperature Field Optimization and Magnetic Nanoparticles Optimal Approximation of MFH for Cancer Therapy

Temperature-Controlled Hyperthermia with Non-Invasive Temperature Monitoring Through Speed of Sound Imaging

Adaptive Optimization on Ultrasonic Transmission Tomography-Based Temperature Image for Biomedical Treatment

Design of 915 MHz Phased Conformal Antenna Array for Deep Tumor Hyperthermia Based on Realistic Breast Model and SAR Optimization

A Non-Invasive Tumor Hyperthermia Method Based on Microwave Field Shaping

Thermostatic Hyperthermia with Non-invasive Temperature Monitoring through Speed of Sound Imaging

Temperature Imaging with Ultrasonic Transmission Tomography for Treatment Control

Microwave Hyperthermia Technology Based on Near‐Field Focused Metasurfaces: Design and Implementation

An Improved MRI Guided Ultrasound System For Superficial Tumor Hyperthermia

Development and testing of a system for controlled ultrasound hyperthermia treatment with a phantom device

Real-time MRI-controlled Ultrasound Hyperthermia System for Superficial Tumor Treatment

Simulation of tumor ablation in hyperthermia cancer treatment: A parametric study

Evaluation of Alternate Cooling and Heating for Tumor Treatment

Model-based feasibility assessment and evaluation of prostate hyperthermia with a commercial MR-guided endorectal HIFU ablation array