Laser stabilisation to neutral Yb in a discharge with polarization enhanced frequency modulation spectroscopy

Valdis Blums,Jordan Scarabel,Kenji Shimizu,Moji Ghadimi,Steven C. Connell,Sylvi Händel,Benjamin G. Norton,Elizabeth M. Bridge,David Kielpinski,Mirko Lobino,Erik W. Streed
DOI: https://doi.org/10.48550/arXiv.2006.12012
2020-06-22
Abstract:Isotope selective optical excitation of atoms is important for experiments with neutral atoms, metrology, and work with trapped ions, including quantum information processing. Polarization-enhanced absorption spectroscopy is used to frequency stabilise a tunable external cavity laser diode system at 398.9 nm for isotope selective photoionization of neutral Yb atoms. This spectroscopy technique is used to measure isotope resolved dispersive features from transitions within a see through configuration Ytterbium hollow-cathode discharge lamp. This Doppler-free dichroic polarization spectroscopy is realised by retro-reflecting a laser beam through the discharge and analysing the polarization dependent absorption with balanced detection. The spectroscopy signal is recovered using lock-in detection of frequency modulation induced by current modulation of the external cavity laser diode. Here, we show the use of polarization-enhanced absorption spectroscopy for isotope selectively loading of $^{171}$Yb$^+$, $^{172}$Yb$^+$, or $^{174}$Yb$^+$ ions into an RF Paul trap.
Atomic Physics,Optics
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to achieve high - precision stabilization of the 398.9 nm laser frequency of ytterbium (Yb) atoms for isotope - selective photoionization. Specifically, the researchers used the Polarisation - Enhanced Absorption Spectroscopy (POLEAS) technique to lock an external - cavity diode - laser system to the resonant frequency of neutral ytterbium atoms. ### Main problems 1. **High - precision laser frequency stabilization**: In order to achieve precise control in quantum information processing, precision measurement, and ion - trap experiments, the laser frequency needs to be stabilized within a few MHz. 2. **Isotope - selective photoionization**: By selectively exciting specific isotopes (such as \(^{171}\text{Yb}^+\), \(^{172}\text{Yb}^+\), or \(^{174}\text{Yb}^+\)), these isotopes can be loaded into an RF Paul trap for further experiments. ### Technical background Traditional laser frequency stabilization methods usually rely on optical frequency combs, Fabry - Pérot cavities, or other commercial wavemeters, which are costly and complex. This paper proposes a simpler and more cost - effective method, that is, using ytterbium atoms in a hollow - cathode lamp for laser frequency stabilization. ### Solution The researchers used the POLEAS technique to achieve laser frequency stabilization through the following steps: 1. **Polarisation - Enhanced Absorption Spectroscopy (POLEAS)**: By retro - reflecting the laser beam through the discharge lamp and analyzing the polarization - dependent absorption changes, a Doppler - free dispersion feature measurement was achieved. 2. **Frequency modulation and lock - in amplification**: By modulating the laser current and using a lock - in amplifier to detect the frequency changes caused by the modulation, a stable error signal was obtained. 3. **Experimental verification**: Experimental verification was carried out with three different laser systems (self - made ECDL, Moglabs laser, M Squared SolsTiS plus ECD - X laser). The results show that the POLEAS technique can provide sufficient frequency stability to reliably and selectively photoionize different isotopes of ytterbium. ### Formula explanation The formulas involved in the paper include those describing the real and imaginary parts of the complex absorption coefficient: \[ \text{Re}(\alpha)=\frac{\alpha_0\gamma^2}{\gamma'^2+(\omega_0 - \omega)^2} \] \[ \text{Im}(\alpha)=-\frac{\alpha_0\gamma(\omega_0 - \omega)}{\gamma'^2+(\omega_0 - \omega)^2} \] where \[ \gamma'=\gamma\sqrt{1 + s_0} \] \[ s_0=\frac{I}{I_{\text{sat}}}=\frac{3I\lambda^3\tau}{\pi h c} \] These formulas describe the changes in the absorption characteristics of the probe light as it passes through the sample and are the key to understanding the principle of the POLEAS technique. In conclusion, this paper achieved high - precision laser frequency stabilization of ytterbium atoms through the POLEAS technique, providing a reliable tool for quantum information processing and other precision measurement experiments.