Abstract:Topologically interlocked material systems are two-dimensional assemblies of unit elements from which no element can be removed from the assembly without disassembly of the entire system. Consequently, such tile assemblies are able to carry transverse mechanical loads. Archimedean and Laves tilings are investigated as templates for the material system architecture. It is demonstrated under point loads that the architecture significantly affects the force-deflection response. Stiffness, load carrying capacity and toughness varied by a factor of at least three from the system with the poorest performance to the system with the best performance. Across all architectures stiffness, strength and toughness are found to be strongly and linearly correlated. Architecture characterizing parameters and their relationship to the mechanical behavior are investigated. It is shown that the measure of the smallest tile area in an assembly provides the best predictor of mechanical behavior. With small tiles present in the assembly the contact force network structure is well developed and the internal load path is channeled through these stiffest components of the assembly.

What problem does this paper attempt to address?

### What problems does this paper attempt to solve? This paper aims to study **the mechanical behavior of topologically interlocked material systems (TIM) under point loads**, especially to explore the influence of different geometric configurations on the mechanical properties of these systems. Specifically, by analyzing the mechanical responses of TIM systems based on Archimedean and Laves tessellation patterns, the author attempts to answer the following questions: 1. **How do different tessellation patterns affect the mechanical properties of TIM systems?** - It has been found that different tessellation patterns significantly affect the stiffness, load - bearing capacity and toughness of the system. For example, the stiffness, strength and toughness of some configurations are at least three times higher than those of other configurations. 2. **Is there a certain structural parameter that can predict the mechanical behavior of TIM systems?** - The author found that the minimum tile area is the best indicator for predicting mechanical behavior. When there are small tiles in the system, the contact force network structure is well - developed, and the internal load paths are mainly transmitted through these most rigid components. 3. **Is there a correlation between the mechanical properties of TIM systems and their structural characteristics?** - Research shows that there is a strong linear correlation among stiffness, strength and toughness. In addition, the relationships between stiffness and toughness, as well as between strength and toughness also show good linear correlations. 4. **How to design TIM systems with specific mechanical properties?** - By selecting appropriate tessellation patterns and structural parameters, TIM systems with the required stiffness, strength and toughness can be designed. This provides a theoretical basis for the development of new material systems, especially in application scenarios where both high strength and high toughness are required. ### Main contributions of the paper - **Expand the space of material design**: By studying the influence of different tessellation patterns on the mechanical properties of TIM systems, the paper provides new ideas for designing new material systems. - **Reveal the relationship between structure and performance**: It has been found that the minimum tile area is a key parameter for predicting mechanical behavior, and the linear relationships among stiffness, strength and toughness are proposed. - **Provide design guidance**: By selecting appropriate tessellation patterns and structural parameters, TIM systems with specific mechanical properties can be designed, thus realizing the optimal design of material systems. In conclusion, through systematic research, this paper reveals the mechanical behavior of TIM systems under point loads and the physical mechanisms behind it, providing important theoretical basis and technical support for future material design and applications.

Mechanics of Topologically Interlocked Material Systems under Point Load: Archimedean and Laves Tiling

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

Manufacture and Mechanics of Topologically Interlocked Material Assemblies

Mechanical Comparison of Arrangement Strategies for Topological Interlocking Assemblies

Short Review on Architectured Materials with Topological Interlocking Mechanisms

On the failure of beam-like topologically interlocked structures

Stiffness, strength, anisotropy, and buckling of lattices derived from TPMS and Platonic and Archimedean solids

Toughening mechanisms and damage propagation in Architected-Interfaces

The key to the enhanced performance of slab-like topologically interlocked structures with non-planar blocks

Mechanical properties and energy absorption capability of a topology-optimized lattice structure manufactured via selective laser melting under axial and offset loading

Structure, Process, and Material Influences for 3D Printed Lattices Designed With Mixed Unit Cells

Numerical investigation of the effective mechanical properties of architected structures: A comparative study of flexural stiffness, homogenization, and elastic anisotropy

The deflection limit of slab-like topologically interlocked structures

Decoupling particle-impact dissipation mechanisms in 3D architected materials

Stiff and Deformable Quasicrystalline Architected Materials

Scutoids as Building Blocks for Topologically Interlocking Material Systems

Geometric effects on impact mitigation in architected auxetic metamaterials

Crashworthiness of 3D Lattice Topologies under Dynamic Loading: A Comprehensive Study

The Extreme Mechanics of Micro- and Nanoarchitected Materials

Design, Fabrication, and Mechanics of 3D Micro‐/Nanolattices

Concurrent Geometrico-Topological Tuning of Nanoengineered Auxetic Lattices Fabricated by Material Extrusion for Enhancing Multifunctionality: Multiscale Experiments, Finite Element Modeling and Data-Driven Prediction