Abstract:This paper compares several approaches to model the unsteady and nonlinear longitudinal aerodynamics of a generic unmanned combat air vehicle configuration based on computational fluid dynamics (CFD). Three different reduced-order models (ROMs) are implemented through unsteady simulations to predict the evolution of forces and moments during prescribed trajectories carried out at [Formula: see text]. The first model investigates a linear quasi-steady model based on a first-order Taylor series expansion of the aerodynamic coefficients. The second one picks up the mathematical formulation of the first model but adds a dynamic coefficient in order to take into account the unsteady effect of rotation rate variations. Finally, the third model is built on indicial functions computed from positive step changes in the angle of attack or pitch rate. The unknown parameters of the first two models and the unknown indicial functions of the third one are obtained, respectively, from the study of forced oscillations and step motions. These prescribed trajectories are performed using unsteady Reynolds-averaged Navier–Stokes simulations coupled with a grid displacement tool. Two different methods are tested and compared to carry out the CFD mesh motions: an overset method and a full moving grid (FMG) method. The indicial functions obtained using the FMG method give results equivalent to those found in the literature in half the time of the overset method. To reduce the computational costs to set up the ROMs, the FMG method is preferred to the overset method. ROMs are then applied, and their predictions are compared with CFD simulations for prescribed trajectories with different angular rates and angles of attack. A study of instantaneous and overall accuracy associated with the implementation cost of the ROMs has allowed to show their strengths and their weaknesses. Similar results are observed at low angles of attack for the ROMs studied, while a major modeling advantage of the indicial method has been identified for higher angles of attack in the nonlinear domain.

Measures and LMIs for Lateral F-16 MRAC Validation

Measures and LMIs for Adaptive Control Validation

Improved Tangential Interpolation-based Multi-input Multi-output Modal Analysis of a Full Aircraft

A two-step LMI approach to robust dynamic output feedback control for the MIMO aircraft model F-18

Dynamics modeling and performance verification of the mechanical flight control system on transport airplane

Active vibration control strategy based on linear matrix inequality for rotor system

Multi-input Multi-output Loewner Framework for Vibration-based Damage Detection on a Trainer Jet

Flight optimisation of missile using linear matrix inequality (LMI) approach

Moment LMI approach to LTV impulsive control

The balanced mode decomposition algorithm for data-driven LPV low-order models of aeroservoelastic systems

Accuracy and Computational Cost Comparison of Numerical Flight Dynamics Reduced-Order Models

Robust Lateral Control of Future Small Aircraft

Enhancing the Pitch-Rate Control Performance of an F-16 Aircraft Using Fractional-Order Direct-MRAC Adaptive Control

Aeroservoelastic model based active control for large civil aircraft

Validation of Higher-Order Interactional Aerodynamics Simulations on Full Helicopter Configurations

LPV Modeling and Identification of Unsteady Aerodynamics for Fast Maneuvering Aircrafts

A neural network based MRAC scheme with application to an autonomous nonlinear rotorcraft in the presence of input saturation

Experimental Validation of Linear and Nonlinear MPC on an Articulated Unmanned Ground Vehicle

Development of a Flight Mechanics Simulation Computer based on a Flexible Aircraft Model for a Regional Aircraft

Learning controllers for performance through LMI regions

Modeling and field-experiments identification of vertical dynamics of vehicle with active anti-roll bar