Reconfigurable multiport switch in coupled mode devices

B. Jaramillo-Ávila,B. M. Rodríguez-Lara

DOI: https://doi.org/10.1088/1402-4896/abc117

2020-10-27

Abstract:We consider a coupled mode system where the effective propagation constants of localized modes are amenable to modulation. Starting from an unmodulated system where power transfer is heavily suppressed, we demonstrate that small, periodic modulation of the propagation constants enhance power transfer using a slowly varying envelope approximation for the field mode amplitudes. We calculate an approximate modulation frequency enabling complete transfer between otherwise negligibly coupled elements. The ability to control these modulations by electrical or thermal effects allows for reconfigurable multiport switching. We use an array of coupled silica waveguides and the thermo-optic effect to test our predictions in the telecom C-band. However, this requires a refractive index modulation with period of the order $~10^{-3}~\mathrm{m}$ and yields total power transfer with a propagation distance of the order of $10^{-1}~\mathrm{m}$, which might make it unattractive for integrated photonic applications. Nevertheless, our results are valid for devices described by an equivalent coupled mode matrix for space or time propagation; for example, arrays of microring or terahertz resonators, microwave cavities, radio frequency antennas, or RLC circuits.

Optics,Applied Physics

What problem does this paper attempt to address?

This paper aims to solve the problem of efficient power transfer in multi - port switches in coupled - mode systems. Specifically, the author focuses on how to enhance the originally severely suppressed power transfer through small - periodic modulation in a coupled - mode system where the effective propagation constant can be modulated. The paper proposes a scheme, that is, to control these modulations by electrical or thermal effects to achieve a reconfigurable multi - port switch function.

### Problems the paper attempts to solve:

1. **Limited power transfer**: In an unmodulated system, due to the large difference in the effective propagation constants between different waveguides, power transfer is severely limited.
2. **Enhancing power transfer**: By introducing small - periodic modulation, complete power transfer can be achieved between waveguides that were almost uncoupled originally.
3. **Reconfigurability**: Use electrical or thermal effects to control the modulation to achieve the reconfigurability of the multi - port switch, so as to flexibly route optical signals in different application scenarios.

### Solutions:

- **Theoretical model**: The paper first proposes a waveguide array model based on SU(2) symmetry, in which the effective propagation constant of each waveguide is different, resulting in limited power transfer.
- **Modulation method**: By introducing small - periodic modulation (for example, using the thermo - optic effect), the effective propagation constant of the waveguide is changed, thereby achieving resonant power transfer over a long propagation distance.
- **Analysis and simulation**: The slow - varying envelope approximation (SVEA) is used to analyze the modulated power transfer, and the theoretical results are verified by finite - element simulation.

### Experimental verification:

- **Example of the telecom C - band**: Taking the fused silica waveguide in the telecom C - band as an example, the paper shows the power transfer between waveguides in the cases of without modulation and with modulation. The results show that near - complete power transfer can be achieved within a relatively short propagation distance through appropriate modulation frequencies and amplitudes.
- **Finite - element simulation**: In order to verify the accuracy of the theoretical model, the paper also conducts 2D finite - element simulation, further confirming the enhancement effect of modulation on power transfer.

### Conclusion:

The paper successfully shows that by periodically modulating the effective propagation constant, efficient power transfer and reconfigurable multi - port switch functions can be achieved in coupled - mode systems. Although this method may face some practical challenges (such as long propagation distances) in integrated photonics applications, its principle is also applicable to other types of coupled - mode systems (such as microring resonators, terahertz resonators, microwave cavities, radio - frequency antennas or RLC circuits).