Camera Technologies for Low Light Imaging: Overview and Relative Advantages

Butch Moomaw

DOI: https://doi.org/10.1016/s0091-679x(06)81013-7

2007-01-01

Methods in Cell Biology

Abstract:Publisher The various low light imaging cameras are intensified camera, cooled CCD, electron bombardment (EB)-CCD camera, intensified EB-CCD, and electron multiplication CCD. The ICCD camera uses an image intensifier (II) coupled to a CCD camera. The II is a vacuum tube device that converts incoming photons into electrons at the photocathode, multiplies the electrons with high-voltage acceleration through a microchannel plate, then reconverts the multiplied electrons back to photons at a phosphor-coated window. The CCCD camera uses just a CCD chip, similar to a high light level camera. An EB-CCD is another vacuum tube device that relies on signal amplification to improve the signal-to-noise (SNR) at low light levels. The addition of a microchannel plate, such as that used in the ICCD, between the photocathode and the back-thinned CCD, provides a large increase in the signal gain compared to the standard EB-CCD. EM-CCD cameras are rapidly becoming the most popular choice for low light imaging when fast frame rates are required or where both high and low light imaging is required. EB-CCDs may be used at moderate light levels, but image quality is not the same as a normal CCD due to the spread of electrons after conversion at the photocathode. Damage to the photocathode may occur from long-term exposure to fixed image patterns, leaving an image burn.

cell biology