Abstract:The goal of this study is to develop a new effective guar gum-grafted acrylamide hydrogel for wastewater treatment, abbreviated as (guar gum-g-acrylamide). For the non-biodegradable and hazardous synthetic acid red 8, the produced guar gum-g-acrylamide hydrogel is a promising thermally stable adsorbent. Microwave-aided technique, ammonium persulfate initiator, and N , N ′-methylene-bis-acrylamide cross-linker are used to make a hydrogel comprising natural polysaccharides guar gum grafted by poly acrylamide. Fourier transformer infrared (FTIR) spectra and scanning electron microscopy (SEM) demonstrate that varied percentages of acrylamide successfully graft the backbone of guar gum. When the grafting percentage of acrylamide is raised, the hydrogel's maximum adsorption capacity (qe) increases. At pH 1 of dye solution, maximum adsorption capacity (qe) is 18 mg.g −1 , at pH 9; qe is decreased up to 8 mg.g −1 . At 0.5 g.L −1 hydrogel, the dye has a low removal percentage (34%), but when the hydrogel dosage is increased to 8 g.L −1 , the removal percentage increases to 90%. When the initial AR8 dye concentration was increased from 50 to 300 mg.L −1 , the removal percentage reduced to 20% and the adsorbed quantity dye increased from 17 to 44 mg.g −1 , but both parameters became limited above this dye concentration. Other ideal conditions for AR8 dye removal by the hydrogel include 60 min of contact time, 150 revolutions per minute (rpm), and a temperature of 20 degrees Celsius. The AR8 dye adsorption kinetic is pseudo-second order, assuming electrostatic interaction between the negatively charged AR8 dye molecules and the positively charged hydrogel-functional group. The adsorption values fit the Langmuir isotherm, with q max . of 54.054 mg.g −1 . The adsorbed quantity (qe) decreases as the temperature rises, indicating that dye molecules physisorbed on the hydrogel pores, and the maximum adsorption capacity is at 20 °C. The exothermic and spontaneity of adsorption were confirmed by the negative values of heat of adsorption (∆ H ° ads. ) and standard Gibbs free energy of adsorption (∆ G ° ads. ). The reusability of the hydrogel was validated after three cycles of desorption of AR8 dye from the hydrogel surface in alkaline solution.

Removal of acid dye from wastewater by cloud point extraction and regeneration of surfactant by pH regulation

Non-dispersive Solvent Extraction of P-Toluic Acid from Purified Terephthalic Acid Plant Wastewater with P-Xylene As Extractant

Laboratory Evaluation of the Use of Solvent Extraction for Separation of Hydrophobic Organic Contaminants from Surfactant Solutions During Surfactant-Enhanced Aquifer Remediation

Complex extraction and stripping of H acid wastewater

Cloud point extraction of heavy metal ions for wastewater remediation: an equilibrium and kinetic study

Recovery of Fumaric Acid from Industrial Wastewater by Chemical Extraction and Stripping

[Extraction and Stripping of H Acid and DSD Acid Wastewater].

Facile synthesis and optimization of Acacia senegal gum hydrogel for kinetically treated adsorptive removal of targeted industrial effluents

Optimization of biosorption of industrial dyes into Luffa cylindrica functionalized with quaternary ammonium salts

Application of grape seed and Austrocylindropuntia mucilage for the simultaneous removal of azo dye and turbidity from synthetic wastewater: Optimizing experimental conditions using Box-Behnken Design (BBD)

Trimeric Cationic Surfactant Coacervation as a Versatile Approach for Removing Organic Pollutants

Green hybrid coagulants for water treatment: An innovative approach using alum and bentonite clay combined with eco-friendly plant materials for batch and column adsorption

Experimental study combined with RSM process optimization for removal of the (Safranin O) cationic dye in the aqueous solution using a hydrogel prepared based on cellulosic biomass: an effective and ecological approach

Simultaneous treatment of dye wastewater and surfactant wastewater by foam separation: Experimental and mesoscopic simulation study

Separation of Some Anionic Dyes Using Reverse Micelles of CTAB and SDS as Efficient Surfactants Adsorbents from Aqueous Medium

Optimization Based on Response Surface Methodology of Anionic Dye Desorption From Two Agricultural Solid Wastes

Surfactant-Assisted synthesis of α-and β-Ag 2 WO 4 modified with Sulphur, Phosphorous, and boron and their applications in wastewater elimination

New and innovative microwave-assisted technology for synthesis of guar gum-grafted acrylamide hydrogel superabsorbent for the removal of acid red 8 dye from industrial wastewater

Solvent Extraction for Separating Micellar-Solubilized Contaminants and Anionic Surfactants

Studying removal of anionic dye by prepared highly adsorbent surface hydrogel nanocomposite as an applicable for aqueous solution

Treatment of Strong Acid Dye Wastewater by Solvent Extraction