Abstract:Converting industrial wastes into value-added building products in an environmental management strategy is a challenging yet vital component of the industrial process. Steel slag (SS), an industrial waste by-product from the steel-making process, is typically disposed of in landfill which consumes land resources and pollutes the environment. This paper explores the possibility of a closed-loop system to convert steel slag into a cement material through carbonation activation, thereby significantly reducing the amount of steel slag waste sent to landfills across Canada. The production of this cementing material can occur next to the steel mill, utilizing steel slag and carbon dioxide collected on-site to fabricate carbon-negative products. To save energy and allow production to be feasible on an industrial scale, ambient pressure (AP) carbonation is developed to reduce carbon emissions while improving their performance. High pressure (HP) carbonation curing and normal hydration (NH) references were also implemented at the same time to justify the application of AP carbonation in reducing CO2 emission. The results of this study found AP carbonation-activated SS compacts have comparable CO2 uptake (about 7.5 tons CO2/100 tons slag) and mechanically compressive strength values as those subjected to HP carbonation, suggesting that AP could be used to replace HP in carbonation curing to ensure a lower energy input. Additionally, AP seemed to possess as effective carbonation as HP. The studies investigated by multiple techniques including X-ray diffractometer (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopic analysis, and scanning electron microscopy (SEM) aim to identify the microstructure development of carbonated SS paste to assess carbonation results. Developed with life cycle assessment (LCA), environmental impact evaluation shows that AP presents a smaller global warming potential (GWP) value than HP. The comparable CO2 sequestration, satisfactory engineering properties, enhanced microstructure and lesser environmental impact in AP carbonation confirm the feasibility of replacing high pressure with extremely low pressure to cure concrete products. The use of AP carbonation for cement material created using steel slag reduces carbon emissions, energy usage, and natural resource consumption.

Carbon capture and utilization using cement-free concrete products via near-ambient pressure carbonation

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Converting industrial waste into a value-added cement material through ambient pressure carbonation

Production of cleaner high-strength cementing material using steel slag under elevated-temperature carbonation

Steel Slag Accelerated Carbonation Curing for High-Carbonation Precast Concrete Development

Development of high-volume steel slag as cementitious material by ethylenediamine tetraacetic acid induced accelerated carbonation

Development of high performance carbonatable concrete for steel slag valorization

Accelerated carbonation of steel slag: A review of methods, mechanisms and influencing factors

Valorization of converter steel slag into eco-friendly ultra-high performance concrete by ambient CO2 pre-treatment

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Effect of Carbonation Treatment on the Properties of Steel Slag Aggregate

Impacts of Hydration Degree of Steel Slag on Its Subsequent CO2 Capture Behaviors and Mechanical Performances of Prepared Building Materials

Environmental, economic and engineering performances of aqueous carbonated steel slag powders as alternative material in cement pastes: Influence of particle size

Interdependent factors contributing towards carbonation of steel slag compact: consideration of casting pressure, water dosage and carbonation duration

Material Properties of Cement Doped with Carbonated Steel Slag Through the Slurry Carbonation Process: Effect and Quantitative Model

Utilization of accelerated carbonation to enhance the application of steel slag: a review

Use of steel slag as sustainable construction materials: A review of accelerated carbonation treatment

Effect of CO2 treatment on the microstructure and properties of steel slag supplementary cementitous materials

Influence of Steel Slag on Mechanical Properties and Durability of Concrete

Different carbon treatments for steel slag powder and their subsequent effects on properties of cement-based materials