Abstract:The need for safe storage systems with a high energy density has increased the interest in high-voltage solid-state Li-metal batteries (LMBs). Solid-state electrolytes, as a key material for LMBs, must be stable against both high-voltage cathodes and Li anodes. However, the weak interfacial contact between the electrolytes and electrodes poses challenges in the practical applications of LMBs. In this study, a double-layered solid composite electrolyte (DLSCE) was synthesized by introducing an antioxidative poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-10 wt % Li1.3Al0.3Ti1.7(PO4)3 (LATP) to the cathode interface, whereas a lithium-friendly poly(oxyethylene) (PEO)-5 wt % LATP was made to come into contact with Li metal. Owing to the heterogeneous double-layered structure of the DLSCE, a high ionic transfer number (0.43), high ionic conductivity (1.49 × 10–4 S/cm), and a wide redox window (4.82 V) were obtained at ambient temperature. Moreover, the DLSCE showed excellent Li-metal stability, thereby enabling the Li–Li symmetric cells to stably run for over 600 h at 0.2 mA/cm2 with effective lithium dendrite inhibition. When paired with a high-voltage LiNi1/3Co1/3Mn1/3O2 cathode, the Li/DLSCE/NCM111 cell exhibited excellent electrochemical performance: long-term cyclability with 85% capacity retention could be conducted at 0.2C after 100 cycles corresponding to 100% Coulombic efficiencies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22532?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22532</a>.EIS and FTIR spectra; SEM image and size distribution of pristine; the TG plot and DSC profiles; LSV curves and the schematic of the intermolecular-hydrogen-binding effect between PVDF-HFP and PEO membranes; voltage profiles of Li symmetrical cells; the lithium-metal surface before battery cycle and the cross-sectional images of the NCM111/DLSCE/Li cell after cycling; cycling performance of the NCM111/PVDF-HFP-10 wt % LATP/Li battery; and EIS of NCM111/Li cells before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22532/suppl_file/am0c22532_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cyano-reinforced in-situ polymer electrolyte enabling long-life cycling for high-voltage lithium metal batteries

Differentiated Lithium Salt Design for Multilayered PEO Electrolyte Enables a High‐Voltage Solid‐State Lithium Metal Battery

Solid electrolytes reinforced by infinite coordination polymer nano-network for dendrite-free lithium metal batteries

A Polymer-Reinforced SEI Layer Induced by a Cyclic Carbonate-Based Polymer Electrolyte Boosting 4.45 V LiCoO2 /Li Metal Batteries

In‐Built Quasi‐Solid‐State Poly‐Ether Electrolytes Enabling Stable Cycling of High‐Voltage and Wide‐Temperature Li Metal Batteries

Selectively Wetted Rigid–Flexible Coupling Polymer Electrolyte Enabling Superior Stability and Compatibility of High‐Voltage Lithium Metal Batteries

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

In situ 3D crosslinked gel polymer electrolyte for ultra-long cycling, high-voltage, and high-safety lithium metal batteries

Lithium bis(oxalate)borate crosslinked polymer electrolytes for high-performance lithium batteries

In-Situ Synthesized Gel Polymer Electrolyte Enable High Capacity and Long-Cycle-Life Lithium Metal Batteries

Hyperbranched PCL/PS Copolymer-Based Solid Polymer Electrolytes Enable Long Cycle Life of Lithium Metal Batteries

A Three-Dimensional Co-Continuous Network Structure Polymer Electrolyte with Efficient Ion Transport Channels Enabling Ultralong-Life All Solid-State Lithium Metal Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

An in-situ generated composite solid-state electrolyte towards high-voltage lithium metal batteries

A lithiated gel polymer electrolyte with superior interfacial performance for safe and long-life lithium metal battery

Designing Cooperative Ion Transport Pathway in Ultra‐Thin Solid‐State Electrolytes toward Practical Lithium Metal Batteries

Polyfluorinated crosslinker-based solid polymer electrolytes for long-cycling 4.5 V lithium metal batteries

Enabling highly stable lithium metal batteries by using dual-function additive catalyzed in-built quasi-solid-state polymer electrolytes

In-situ constructing “ceramer” electrolytes with robust-flexible interfaces enabling long-cycling lithium metal batteries

Interphase Optimum via Synergistic Effect of Poly(1,3‐dioxolane) Electrolytes and Lithium Difluorophosphate for Stable Lithium Metal Batteries

Long‐cycling and High‐voltage Solid State Lithium Metal Batteries Enabled by Fluorinated and Crosslinked Polyether Electrolytes