Abstract:Graphene quantum dots (GQDs) have received great interest in the past few years due to its unique properties such as the quantum confinement and edge effects when their sizes are down to 10 nm. These new physical properties can induce size-dependent bandgap, and unique optical and electronic properties, which make them excellent materials for photovoltaics and photoelectochemical (PEC) devices. In a dye-sensitized solar cell (DSSC), light harvesting capability of dyes could be enhanced by Förster resonance energy transfer (FRET) phenomena, wherein energy is transferred from an excited donor fluorophore to a suitable acceptor dye molecule. The strict requirement that the overlap of the emission spectrum of donor and absorption spectrum of acceptor, which also requires proper band edge alignment between the them, significantly limits the variety of donors and acceptors suitable for the FRET-based DSSCs. In our DSSC work, graphene quantum dots were co-sensitized with N719 dyes and we successfully explored that the GQDs is a suitable donor material for the N719 dyes. From the emission and time decay spectra analysis, the FRET efficiency was measured to be 27 %. The power conversion efficiency ( ƞ) of the standard DSSC is 6.12 % with a short-circuit current density ( J sc ) of 12.74 mAcm -2 and open-circuit voltage ( V oc ) of 760 mV. The co-sensitization of GQD greatly enhances the ƞ up to 7.96 % with a J sc of 16.54 mAcm -2 and V oc of 770 mV. The co-sensitization of GQDs improved both the J sc and ƞ values by ~ 30 %. The FRET enhanced the overall light absorption capacity of the N719 dye and hence photocurrent generation of the DSSC. Moreover, the co-sensitization of GQDs increase the TiO 2 /dye/electrolyte interface resistance, which suppresses the charge recombination and leads to increased V oc value. For PEC water splitting, higher light absorption can also be achieved by utilizing light-matter interplaymechanisms, such as, surface plasmon resonance (SPR), plasmonicresonance energy transfer (PRET) and exciton−plasmon interactions (EPI). The optical properties of the semiconductor and metal nanoparticles (SNPs-MNPs) are strongly modified via EPI comparing to single NPs. Therefore, we have utilized the unique combination of GQDs and AuNPs (SNPs-MNPs) to effectively enhance PEC performance of TiO 2 nanorods (TNRs). The AuNP-GQD decorated TNR photoelectrode has achieved a superior PEC performance with a photocurrent density of 1.75 mAcm -2 at 1.23 V vs RHE, which is one of higher value obtained in PEC measurement using TiO 2 nanorods due to an efficient utilization of solar light. The experimental analysis has indicated that the AuNPs has contributed to the PRET / SPR-mediated hot electron injection into TiO 2 and the GQDs contributed to the improved electron injection into the TiO 2 . Moreover, the significantly improved PEC water splitting efficiency is attributed to the synergistic effect due to EPI and/or FRET between AuNPs and GQDs in addition to the good catalytic property of the AuNPs and the GQDs.

g-C3N4@TiO2 photoanodes for high-efficiency QDSSCs: improved electron transfer and photochemical stability

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Construction of TiO2 NP@TiO2 NT Double-Layered Structural Photoanode to Enhance Photovoltaic Performance of CdSe/CdS Quantum Dots Sensitized Solar Cells

Enhancement of photoelectric conversion efficiency with sulfur-doped g-C3N4/TiO2 nanoparticles composites in dye-sensitized solar cells

TiO2 Hierarchical Pores/nanorod Arrays Composite Film As Photoanode for Quantum Dot-Sensitized Solar Cells

Improved photovoltaic performance of solar cells co-sensitized with graphitic C3N4 and CdS quantum dots

A Layered Photo-Anode Prepared Using TiO2 Nanocrystals with Different Sizes for Enhanced Light-Trapping in Quantum Dots-Sensitized Solar Cells

Energy band and interface engineering of ternary TNAs/g-C 3 N 4 /NCQDs photoanode with enhanced optical absorption and charge transfer for efficient photoelectrochemical water oxidation

Improving Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With g-C 3 N 4 /TiO 2 Nanofibers

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Ti3C2 MXene quantum dots decorated mesoporous TiO2/Nb2O5 functional photoanode for dye-sensitized solar cells

Multifunctional Composite Photoanode Containing a TiO 2 Microarchitecture with Near-Infrared Upconversion Nanoparticles for Dye-Sensitized Solar Cells

(Invited) Light Absorption Enhancement Using Graphene Quantum Dots in Dye-Sensitized Solar Cells and Photoelectrochemical Water Splitting

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

g-C3N4 quantum dots decorated on urchin-like TiO2 nanostructures for the photoelectrochemical water splitting

The design of high performance photoanode of CQDs/TiO2/WO3 based on DFT alignment of lattice parameter and energy band, and charge distribution

A Zno/Tio2 Composite Nanorods Photoanode with Improved Performance for Dye-Sensitized Solar Cells

Carbon quantum dots modified anatase/rutile TiO<sub>2</sub> photoanode with dramatically enhanced photoelectrochemical performance

A Novel Tio2 Nanostructure As Photoanode for Highly Efficient Cdse Quantum Dot-Sensitized Solar Cells

Highly Efficient Charge Collection in Dye-Sensitized Solar Cells Based on Nanocomposite Photoanode Filled with Indium-Tin Oxide Interlayer

Application of ZnTiO3 in Quantum-Dot-sensitized Solar Cells and Numerical Simulations Using First-Principles Theory