Abstract:mpg-C3N4/anatase TiO2 with reactive {001} facets composites were synthesized via a facile ultrasonic dispersion method. Incorporation of mpg-C3N4 into anatase TiO2 was successfully confirmed by X-ray diffraction (XRD). The percentage of exposed {001} facets in TiO2 calculated from the Raman spectra was 80.6%. The microstructure and optical properties of the as-prepared samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption-desorption isotherms, UV-vis diffuse reflectance spectra (DRS) and photoluminescence (PL) spectroscopy. The effects of mass ratios of mpg-C3N4/(TiO2 + mpg-C3N4) on the photocatalytic activities of the mpg-C3N4/TiO2 composites were investigated. The photocatalytic experiments indicated that the mpg-C3N4/TiO2 composites showed a much higher photocatalytic activity than the pristine TiO2 and mpg-C3N4 for the degradation of methylene blue (MB) under UV light and visible light irradiation. This enhancement should be attributed to the reactive {001} facets of TiO2 and the heterojunction formed at the interface between anatase TiO2 and mpg-C3N4, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Compared with the decolorization process, mineralization is slower. The degradation of 2,4-dichlorophenol suggests that the dye sensitization is not the main cause of dye degradation. In addition, the quenching effects of different scavengers proved that the superoxide radicals (O-center dot(2)-) and holes (h(+)) were the main factors for the improved photoactivity under UV-light, while the superoxide radicals (O-center dot(2)-) play important roles in the photocatalytic reaction under visible light irradiation. Repeatability experiments of MB degradation suggest that the mpg-C3N4/TiO2 composites have high stability. The photocatalytic degradations of MB, RhB and MO were measured under UV and visible light irradiation and the photocatalytic degradation efficiency was found to be in the decreasing order of RhB > MB > MO. These results indicate that the incorporation of mpg-C3N4 into anatase TiO2 with reactive {001} facets is an effective method to improve the photocatalytic activity under both UV and visible light.

A novel cellulose‐derived carbon aerogel@ Na 2 Ti 3 O 7 composite for efficient photocatalytic degradation of methylene blue

Photocatalyst-coated Carbon Microtube Electrodes: Preparation and Characterization of Their Properties and Photocatalytic Degradation of Methylene Blue.

Synthesis of TiO2@lignin based carbon nanofibers composite materials with highly efficient photocatalytic to methylene blue dye

Preparation of Cotton Linters’ Aerogel-Based C/NiFe2O4 Photocatalyst for Efficient Degradation of Methylene Blue

A TiO2 Coated Carbon Aerogel Derived from Bamboo Pulp Fibers for Enhanced Visible Light Photo-Catalytic Degradation of Methylene Blue

Carbon/Mn3O4/SrTiO3 Microsphere Photocatalyst for the Efficient Removal of High-Concentration Methylene Blue from Water

In Situ Synthesis Of A Stable Fe3o4@Cellulose Nanocomposite For Efficient Catalytic Degradation Of Methylene Blue

Molecularly Imprinted Polymer-Based Photocatalyst for Highly Selective Degradation of Methylene Blue.

Efficiently Recyclable Fe-Doped ZnO/Bacterial Cellulose-Based Composite Aerogel for Photocatalytic Degradation of Methylene Blue Under Visible Light

mpg-C3N4/anatase TiO2 with reactive {001} facets composites to enhance the photocatalytic activity of organic dye degradation

Efficient catalytic degradation of methylene blue by a novel Fe3+-TiO2@CGS three-dimensional photoelectric system

Facile Preparation and Characterization of Anatase TiO2/nanocellulose Composite for Photocatalytic Degradation of Methyl Orange

Advanced cellulose-based hydrogel TiO2 catalyst composites for efficient photocatalytic degradation of organic dye methylene blue

Integrated Nanostructures of TiO2/g-C3N4/Diatomite Based on Low-Grade Diatomite as Efficient Catalyst for Photocatalytic Degradation of Methylene Blue: Performance and Mechanism

Construction of (001)-TiO2/g-C3N4 heterojunction for enhanced photocatalytic degradation of methylene blue

MXene—Reclaimed Cellulose Acetate Composites for Methylene Blue Removal Through Synergistic Adsorption and Photocatalysis

Ti 4+ -dopamine/sodium alginate multicomponent complex derived N-doped TiO 2 @carbon nanocomposites for efficient removal of methylene blue

Enhanced Photoelectric Catalytic Degradation of Methylene Blue Via TiO2 Nanotube Arrays Hybridized with Graphite-Like Carbon

A novel solar-triggered MIL-125(Ti)/g-C3N4/SA composite aerogel with high catalytic activity for degradation of organic contaminants

Multifunctional Photocatalyst of Graphitic Carbon Embedded with Fe 2 O 3 /fe 3 O 4 Nanocrystals Derived from Lichen for Efficient Photodegradation of Tetracycline and Methyl Blue

Multifunctional photocatalyst of graphitic carbon embedded with Fe2O3/Fe3O4 nanocrystals derived from lichen for efficient photodegradation of tetracycline and methyl blue