Laser beam properties and microfluidic confinement control thermocavitation

Jelle J. Schoppink,Jose A. Alvarez-Chavez,David Fernandez Rivas

DOI: https://doi.org/10.1063/5.0186998

IF: 4

2024-01-01

Applied Physics Letters

Abstract:Thermocavitation, the creation of a vapor bubble by heating a liquid with a continuous-wave laser, has been studied for a wide range of applications. Examples include the development of an actuator for needle-free jet injectors, as the pumping mechanism in microfluidic channels and nanoparticle synthesis. Optimal use in these applications requires control over the bubble dynamics through the laser power and beam radius. However, the influence of the laser beam radius on the bubble characteristics is not fully understood. Here, we present a way to control the beam radius from an optical fiber by changing the distance from the glass–liquid interface. We show that the increase in the beam size results in a longer nucleation time. Numerical simulations of the experiment show that the maximum temperature at nucleation is 237 ± 5 °C and independent of laser parameters. Delayed nucleation for larger beam sizes results in more absorbed energy by the liquid at the nucleation instant. Consequently, a larger beam size results in a faster growing bubble, producing the same effect as reducing the laser power. We conclude that the bubble energy only depends on the amount of absorbed optical energy and it is independent of the beam radius and laser power for any amount of absorbed energy. This effect contrasts with pulsed lasers, where an increase in the beam radius results in a reduction of bubble energy. Our results are of relevance for the use of continuous-wave laser-actuated cavitation in needle-free jet injectors as well as other applications of thermocavitation in microfluidic confinement.

physics, applied

What problem does this paper attempt to address?

The problem that this paper attempts to solve is about how to precisely regulate bubble dynamics during the thermal cavitation process by controlling the characteristics of the laser beam and the microfluidic environment. Specifically, the study focused on the influence of laser power and beam radius on bubble nucleation time, absorbed energy, and final bubble volume and kinetic energy when a continuous - wave laser generates bubbles in a liquid. Through a combination of experimental and numerical simulation methods, the paper explored how these parameters affect the bubble formation process and how to achieve precise control of bubble characteristics by changing these parameters.

### Main research questions:
1. **Influence of laser beam radius on bubble nucleation time**: The study found that as the laser beam radius increases, the bubble nucleation time also lengthens. This is because a larger beam radius leads to a slower local heating rate, thus delaying the bubble nucleation time.
2. **Influence of laser power on bubble nucleation time and absorbed energy**: Reducing the laser power also leads to an increase in the nucleation time because lower power means a slower heating rate.
3. **Determination of nucleation temperature**: Through numerical simulation, the study determined that the maximum temperature at the moment of nucleation is approximately \(237\pm10\) °C, which is independent of the laser beam radius and power.
4. **Relationship between bubble volume and kinetic energy and absorbed energy**: The study found that the maximum volume of the bubble increases linearly with the absorbed energy, while the kinetic energy of the bubble has a quadratic relationship with the absorbed energy. For large energy values, the energy conversion efficiency will decrease due to the influence of thermal diffusion.

### Research methods:
- **Experimental setup**: Use a microfluidic chip and a continuous - wave laser, adjust the radius of the laser beam through a high - precision positioning system, and use a high - speed camera to record the bubble dynamics process.
- **Numerical simulation**: Use COMSOL software to perform numerical simulations of heat transfer and energy absorption to verify the experimental results and further understand the mechanisms of bubble nucleation and growth.

### Research significance:
- **Application prospects**: The research results are helpful for optimizing the performance of continuous - wave lasers in applications such as needle - free injectors and microfluidic pumps. By precisely controlling the laser parameters, the size and growth rate of bubbles can be better regulated, improving the application effect.
- **Theoretical contribution**: The research provides an in - depth understanding of the bubble nucleation and growth mechanisms during the thermal cavitation process, filling the gaps in existing research.

Through these studies, the authors have provided an important theoretical and practical basis for the application of thermal cavitation technology in microfluidic systems.