Abstract:The results of studies on thermodynamics of martensitic transformation in Fe-C and Fe-X-C alloys lead the Ms temperature in structural steels to be predicted. Establishing thermodynamics of martensitic transformation in Cu- and Fe-Mn-Si based alloys built the basis of composition and processing design for Cu- and Fe- based shape memory alloys. The thermodynamic approach for calculation of Ms in ZrO2 containing ceramics and corrected formula expressing the effect of parent grain size on Ms were suggested. The revised kinetics equation of a thermal martensitic transformation shows that alloying element varying the diffusion coefficient of carbon in low-carbon steels would affect the amount of the retained austenite and it will be beneficial for the exploitation of steels with microstructure of lath martensite. Research on the isothermal kinetics of the retained austenite→martensite in GCrl5 ball bearing (AISI 52 100) steel indicates that the dimensional stability (as comparison to specimen treated by traditioinal quenching and tempering) increases 34％ in specimen treated by an isothermal holding in order to form a few percent of isothermal martensite from the retained austenite after quenching and followed by normal tempering and the contact fatigue life is not reduced. Studies of characteristics of martensitic transformations and their reverse transformations in Ni-Ti, Cu-Zn-Al, Fe-Mn-Si based alloys and ZrO2 containing ceramics reveal the factors affecting the shape memory effect (SME) and indicate the way to improve the SME as well as the exploitation of these materials. Thermodynamics study of bainitic transformation, observation of the growth ledge, studies on the effect of parent strengthening on transformations and the results of internal friction measurements all display that the bainite formation is controlled by diffusion. Addition of alloying elements hindering the diffusion of Zn and Al in Cu-Zn-Al may improve the SME and its service life. There exists the hainitic transformatioin in CeO2-ZrO2 and it relates to the appearance of brittleness in ZrO2 containing ceramics. Research on the ordering of β phase in Cu-Zn is significant for the application of alloy with ordered phase. The presentation of the criterion of spinodal decomposition in ternary alloys may be valuable for the development of alloys exhibiting high damping capacity or high strength by means of spinodal decomposition. Group theory is successfully utilized in crystallography of phase transformation. The required condition for the appearance of crystallography reversibility derived from group theory is the formation of single variant martensite. It seems effective that the soliton is introduced in the nucleation and growth model in phase transformation.

Martensitic phase transformation in short-range ordered Fe50Rh50 system induced by thermal stress and mechanical deformation

The Premartensite and Martensite in Fe50Rh50 System

The Mechanism of Structure Phase Transition from Α Fe to Ε Fe under Uniaxial Strain: First-principles Calculations

The BCC-FCC Phase Transformation Pathways and Crystal Orientation Relationships in Dual Phase Materials From Al-(Co)-Cr-Fe-Ni Alloys

Phase Transformation And Microstructure Of Nbru High Temperature Shape Memory Alloy

Pathways to Titanium Martensite

Stress-Induced Martensitic Transformation of Zr50cu25ni10co15 Nanocrystals Embedded in an Amorphous Matrix

Martensitic Transformation And Premartensitic Phenomena In Ti-Ni-Based Alloys

In Situ Atomic-Scale Observation of Deformation-Induced Reversible Martensitic Transformation in a CrMnFeCoNi High Entropy Alloy

Nonequilibrium phase transformation of NdFe11Ti compound during mechanical milling

Studies on Phase Transformations and Their Applications in Materials Engineering

Martensitic transformation and microstructure in Nb–Ru–Fe shape memory alloys

Modulated Martensite: Why it forms and why it deforms easily

Deformation mechanisms of a novel multiphase Zr–30Ti–7Nb–4Sn alloy consisting of β, α′ and α′′ phases

Atomic scale modeling of the coherent strain field surrounding Ni4Ti3 precipitate and its effects on thermally-induced martensitic transformation in a NiTi alloy

A Study of Stress-Induced Phase Transformation and Micromechanical Behavior of CuZr-based Alloy by In-Situ Neutron Diffraction

A TEM Study on Thermally-Induced Martensitic Transformation in Ti44Ni47Nb9 Alloy

Structural Origin of Reversible Martensitic Transformation and Reversible Twinning in NiTi Shape Memory Alloy

Martensitic Transformation in Ordering-Treated Fe74Ga26 Alloy

Strain Modulated Ferromagnetic to Antiferromagnetic Transition in FeRh/BaTiO3 (001) Heterostructures

A Comparative Study of Elastic Constants of Ti–Ni-based Alloys Prior to Martensitic Transformation