Abstract:Efficient and stable electrode materials are urgently required for wastewater treatment in the electrocatalytic degradation of toxic and refractory organic pollutants. Ti3+ self-doping black TiO2 nanotube arrays (Ti/B-TiO2-NTs) as an interlayer were used for preparing a novel PbO2 electrode via an electrochemical reduction technology, and a sodium dodecyl sulfate (SDS)-modified PbO2 catalytic layer was successfully achieved via an electrochemical deposition technology. The physicochemical characterization tests showed that the Ti/B-TiO2-NTs/PbO2-SDS electrodes have a denser surface and finer grain size with the introduction of Ti3+ in the interlayer of Ti/TiO2-NTs and the addition of SDS in the active layer of PbO2. The electrochemical characterization results showed that the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode had higher oxygen evolution potential (2.11 V vs. SCE), higher electrode stability, smaller charge-transfer resistance (6.74 Ω cm−2), and higher hydroxyl radical production activity, leading to it possessing better electrocatalytic properties. The above results indicated that the physicochemical and electrochemical characterization of the PbO2 electrode were all enhanced significantly with the introduction of Ti3+ and SDS. Furthermore, the Ti/B-TiO2-NTs/PbO2-SDS electrodes displayed the best performance on the degradation of methylene blue (MB) in simulated wastewater via bulk electrolysis. The removal efficiency of MB and the chemical oxygen demand (COD) could reach about 99.7% and 80.6% under the optimal conditions after 120 min, respectively. The pseudo-first-order kinetic constant of the Ti/B-TiO2-NTs/PbO2-SDS electrode was 0.03956 min−1, which was approximately 3.18 times faster than that of the Ti/TiO2-NTs/PbO2 electrode (0.01254 min−1). In addition, the Ti/B-TiO2-NTs/PbO2-SDS electrodes showed excellent stability and reusability. The degradation mechanism of MB was explored via the experimental identification of intermediates. In summary, the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode is a promising electrode in treating wastewater.

A Gd3+-doped blue TiO2 nanotube array anode for efficient electrocatalytic degradation of iohexol

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Extremely Efficient Electrochemical Degradation of Organic Pollutants with Co-Generation of Hydroxyl and Sulfate Radicals on Blue-TiO2 Nanotubes Anode

Trace Ti3+- and N-codoped TiO2 Nanotube Array Anode for Significantly Enhanced Electrocatalytic Degradation of Tetracycline and Metronidazole

Blue Hierarchical TiO2 Nanotube Array for Significantly Enhanced Electrochemical Oxidation Performance and Stability of Tetracycline Degradation

Fabrication of sulfur-doped TiO2 nanotube array as a conductive interlayer of PbO2 anode for efficient electrochemical oxidation of organic pollutants

Preparation and characterization of a novel blue-TiO2/PbO2-carbon nanotube electrode and its application for degradation of phenol

Electrochemically Reduced Phytic Acid-Doped TiO2 Nanotubes for the Efficient Electrochemical Degradation of Toxic Pollutants.

Development of SDS-Modified PbO2 Anode Material Based on Ti3+ Self-Doping Black TiO2NTs Substrate as a Conductive Interlayer for Enhanced Electrocatalytic Oxidation of Methylene Blue

Influence of Gd Doping on the Structure and Electrocatalytic Performance of TiO2 Nanotube/SnO2−Sb Nano‐coated Electrode

Stable boron and cobalt co-doped TiO2 nanotubes anode for efficient degradation of organic pollutants

Stable boron and cobalt co-doped TiO<sub>2</sub> nanotubes anode for efficient degradation of organic pollutants

Cobalt-Doped Black TiO2 Nanotube Array As a Stable Anode for Oxygen Evolution and Electrochemical Wastewater Treatment

Enhanced Electrochemical Removal of Dye Wastewater by PbO2 Anodes Using Halloysite Nanotubes with Different Surface Charge Properties

Efficient Electrochemical Degradation of X-GN Dye Wastewater Using Porous Boron-Doped Diamond Electrode.

Effect of Matrix on the Electrochemical Characteristics of TiO 2 Nanotube Array-Based PbO 2 Electrode for Pollutant Degradation

Degradation of X-3B dye by immobilized TiO2 photocatalysis coupling anodic oxidation on BDD electrode

Fabrication of a SnO2-Sb electrode with TiO2 nanotube array as the middle layer for efficient electrochemical oxidation of amaranth dye

WITHDRAWN: A three-step electrochemical method designed for the production of nickel- and platinum-doped TiO(2) multi-nanoporous thin-film electrodes: An application in the degradation of acid red G

Treatment of Ni-EDTA containing wastewater by electrochemical degradation using Ti3+ self-doped TiO2 nanotube arrays anode

Preparation of short, robust and highly ordered TiO2 nanotube arrays and their applications as electrode