Abstract:We study the friction when rectangular blocks made from rubber, polyethylene, and silica glass are sliding on ice surfaces at different temperatures ranging from -40 to 0 °C, and sliding speeds ranging from 3 μm/s to 1 cm s-1. We consider a winter tire rubber compound both in the form of a compact block and as a foam with ∼10% void volume. We find that both rubber compounds exhibit a similar friction on ice for all studied temperatures. As in a previous study at low temperatures and low sliding speeds, we propose that an important contribution to the friction force is due to slip between the ice surface and ice fragments attached to the rubber surface. At temperatures around 0 °C (or for high enough sliding speeds), a thin pre-melted water film will occur at the rubber-ice interface, and the contribution to the friction from shearing the area of real contact is small. In this case, the dominant contribution to the friction force is due to viscoelastic deformations of the rubber by the ice asperities. The sliding friction for polyethylene (PE) and silica glass (SG) blocks on ice differs strongly from that of rubber. The friction coefficient for PE is ∼0.04-0.15 and is relatively weakly velocity dependent except close to the ice melting temperature where the friction coefficient increases toward low sliding speeds. Silica glass exhibits a similarly low friction as PE for T > -10 °C but very large friction coefficients (of order unity) at low temperatures. For both PE and SG, unless the ice track is very smooth, the friction force depends on the position x along the sliding track. This is due to bumps on the ice surface, which are sheared off by the elastically stiff PE and SG blocks, resulting in a plowing-type of contribution to the friction force. This results in friction coefficients, which locally can be very large ∼1, and visual inspection of the ice surface after the sliding acts show ice wear particles (white powder) in regions where ice bumps occur. Similar effects can be expected for rubber blocks below the rubber glass transition temperature, and the rubber is in the (elastically stiff) glassy state.

Ice friction: The effects of surface roughness, structure, and hydrophobicity

Ice friction at the nanoscale

Study on the Ice Friction Characteristics

Nanorheology of interfacial water during ice gliding

Cold self-lubrication of sliding ice

Sliding friction on ice

Role of Rubber Stiffness and Surface Roughness in the Tribological Performance on Ice

Intrinsic dependence of ice adhesion strength on surface roughness

Reframing ice adhesion mechanisms on a solid surface

Interdependence of Surface Roughness on Icephobic Performance: A Review

Effects of frost formation on the ice adhesion of micro-nano structure metal surface by femtosecond laser

Rubber-ice friction

Temperature Dependent Anti-Icing Performance of the Microstructure Surface: Wettability Change and Ice Nucleation

How ploughing and frictional melting regulate ice-skating friction

Unraveling Ice-Solid Interface Rupture Dynamics: Insights from Molecular Dynamics Simulations

Effects of surface structure deformation on static friction at fractal interfaces

Confinement enhanced viscosity vs shear thinning in lubricated ice friction

Imparting icephobicity with substrate flexibility

Analysis of Water Droplet Motion on Hydrophobic Surfaces with Different Microstructures

Micromechanics of Friction: Effects of Nanometre-Scale Roughness

Friction of Droplets Sliding on Microstructured Superhydrophobic Surfaces.