Abstract:Portland cements (PCs) and cement blends are multiphase materials of different fineness, and quantitatively analysing their hydration pathways is very challenging. The dissolution (hydration) of the initial crystalline and amorphous phases must be determined, as well as the formation of labile (such as ettringite), reactive (such as portlandite) and amorphous (such as calcium silicate hydrate gel) components. The microstructural changes with hydration time must also be mapped out. To address this robustly and accurately, an innovative approach is being developed based on in situ measurements of pastes without any sample conditioning. Data are sequentially acquired by Mo Kα1 laboratory X-ray powder diffraction (LXRPD) and microtomography (µCT), where the same volume is scanned with time to reduce variability. Wide capillaries (2 mm in diameter) are key to avoid artefacts, e.g. self-desiccation, and to have excellent particle averaging. This methodology is tested in three cement paste samples: (i) a commercial PC 52.5 R, (ii) a blend of 80 wt% of this PC and 20 wt% quartz, to simulate an addition of supplementary cementitious materials, and (iii) a blend of 80 wt% PC and 20 wt% limestone, to simulate a limestone Portland cement. LXRPD data are acquired at 3 h and 1, 3, 7 and 28 days, and µCT data are collected at 12 h and 1, 3, 7 and 28 days. Later age data can also be easily acquired. In this methodology, the amounts of the crystalline phases are directly obtained from Rietveld analysis and the amorphous phase contents are obtained from mass-balance calculations. From the µCT study, and within the attained spatial resolution, three components (porosity, hydrated products and unhydrated cement particles) are determined. The analyses quantitatively demonstrate the filler effect of quartz and limestone in the hydration of alite and the calcium aluminate phases. Further hydration details are discussed.

o 02 Application of synchrotron radiation in cement mineralogy

Application of micro X-ray diffraction to investigate the reaction products formed by the alkali–silica reaction in concrete structures

NMR, XRD, IR and synchrotron NEXAFS spectroscopic studies of OPC and OPC/slag cement paste hydrates

On-line X-ray diffraction for quantitative phase analysis: Application in the Portland cement industry

Mix and measure II: joint high-energy laboratory powder diffraction and microtomography for cement hydration studies

Advanced mapping of inorganic treatments on porous carbonate stones by combined synchrotron radiation high lateral μXRPD and μXRF

Time-Space-Resolved Chemical Deconvolution of Cementitious Colloidal Systems Using Raman Spectroscopy

Archaeometry at synchrotrons: how to get the most out of ancient materials

Three-dimensional electron diffraction on clinkers: the belite α′H incommensurate modulated structure

Application of various microscopy techniques to study early‐age and longer‐term behaviour of super sulphated cement microstructure

Advancement in Raman spectroscopy (RS) for characterizing cementitious materials

Investigations on alkali-silica reaction products using Raman spectroscopy

Microstructure, crystallinity and composition of alkali-silica reaction products in concrete determined by transmission electron microscopy

Classical and new insights into the methodology for characterizing the hydration of calcium aluminate cements

Utilizing optical spectroscopy and 2',7'-difluorofluorescein to characterize the early stages of cement hydration

Alkali-silica reaction products and cracks: X-ray micro-tomography-based analysis of their spatial-temporal evolution at a mesoscale

The use of softer X-rays in the structure elucidation of microporous materials

Investigation of the microstructure and mineralogical composition of urinary calculi fragments by synchrotron radiation X-ray microtomography: a feasibility study

Alkali-silica reaction – a multidisciplinary approach

Synchrotron Radiation for the Study of Hydrothermal Formation Mechanisms of Oxide Nanomaterials

Phase Analysis of Portland Cement by Combined Quantitative X-Ray Powder Diffraction and Scanning Electron Microscopy.