Characteristics of OP35E-based phase-change emulsion and its potential applications in thermal management
Linhui Li,Xianzhang Lei,Ziqing Zhang,Yixiao Xiao,Wei Chen
DOI: https://doi.org/10.1080/15567036.2024.2432552
2024-11-29
Energy Sources Part A Recovery Utilization and Environmental Effects
Abstract:A phase-change emulsion was prepared using OP35E (melting peak at 36.58 °C) as the phase-change material and Span60-PEG600 blend as a compound emulsifier. This phase-change emulsion exhibited low viscosity, low subcooling, low electrical conductivity, high heat capacity, non-corrosiveness, and high stability.The viscosity, subcooling, electrical conductivity, and pH value of the emulsion were 2.67 mPa∙s, 1.03°C, 99.3 us/cm, and 7.80, respectively. No phase separation occurred after the emulsion was left to stand for 1 month. The volume average particle size increased by only 0.14 μm, Neither agglomeration nor stratification of the emulsion occurred after 400 high/low-temperature cycles. The electrical conductivity and pH value of the emulsion were determined to be 150.5 μs/cm and 7.23, respectively, indicating small variations. In the 60-day static corrosion test, the emulsion exhibited low corrosiveness to 304 stainless steel, T2 copper, and H62 brass, with corrosion amounts of 0.240 g/m 2 , 0.719 g/m 2 , and 1.438 g/m 2 , respectively.The melting peak of the emulsion occurred at the temperature of 35.45°C, and the enthalpy of melting was 35.28 J/g. The maximum apparent specific heat capacity of emulsion is 9.94 J/(g∙K), which is more than twice that of conventional coolants such as water and ethylene glycol. In conclusion, the OP35E-based phase-change emulsion has a high heat storage capacity and exhibits great potential application in lithium battery thermal management systems.
energy & fuels,engineering, chemical