Abstract:The spherical parallel mechanism (SPM) offers several advantages such as high stiffness, precision, a large workspace, immunity to interference, and simple kinematic calculations. Consequently, SPM finds extensive applications in fields like surgical robots, exoskeleton robots, and others. This paper proposes a design principle based on the virtual middle-plane constraint method, which integrates the branch constraint of the mechanism into the intermediate virtual constraint plane. On the one side, a symmetric spherical 3R branch consisting of two spherical links is provided to offer 3 rotational degrees of freedom (DOFs). On the other side, a constraint force located on the middle plane constrains 1 rotational DOF, enabling the end effector link to achieve 2 DOFs. Several symmetrical SPMs are synthesized based on the constraint force provided by the branches. The mechanism can achieve continuous motion from an initial position to a final position by undergoing a single equivalent rotation around an axis on the virtual symmetric plane passing through the center. The forward and inverse kinematic solutions and the velocity Jacobian matrix of the symmetrical SPM are determined. The workspace of the mechanism is obtained by considering inverse kinematics and link interference conditions. The dexterity and force/torque transfer performance of the mechanism within a certain range are analyzed. The correctness of the kinematics of the symmetrical SPM is demonstrated through simulation analysis and prototype experiment. This research lays a foundation for motion planning and dynamic analysis of this kind of mechanism by providing a variety of configurations for practical applications.

A family of generalized single-loop RCM parallel mechanisms: structure synthesis, kinematic model, and case study

A family of novel RCM rotational compliant mechanisms based on parasitic motion compensation

Reconfigurable Generalized Parallel Mechanisms with Kinematotropic Linkages

Motion Characteristics Analysis of a Novel 2R1T 3-UPU Parallel Mechanism

Design and analysis of novel 2R1T generalized parallel mechanisms with large rotational angles

Kinematics and workspace analysis of a 3- C R(Pa)(Pa)R parallel mechanism with an orthogonal layout

Design of a spherical parallel mechanism with controllable center of rotation using a spherical reconfiguration linkage

Design and Motion Principle Analysis of new parallel mechanisms with fewer active inputs than the degrees of freedom

Construction and forward kinematics of a novel reconfigurable parallel mechanism

Design and Validation of A Novel Planar 2R1T Remote Center-of-motion Mechanism Composing of Dual-Triangular and Straight-Line Linkages

Type synthesis of 5-DOF redundantly actuated parallel robots for super-large components with complicated surfaces.

Development of a 2-DOF Singularity-Free Spherical Parallel Remote Center of Motion Mechanism With Extensive Range of Motion

Two types of remote-center-of-motion deployable manipulators with dual scissor-like mechanisms

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Design and analysis of a class of two-limb non-parasitic 2T1R parallel mechanism with decoupled motion and symbolic forward position solution - influence of optimal arrangement of limbs onto the kinematics, dynamics and stiffness

Type synthesis of single-loop 3T1R-parallel mechanisms with a multi-DOF drive system

Type synthesis of parallel mechanism with 3T/3R motion patterns

Design principles and kinematic analysis of a novel spherical 2-degree-of-freedom (DOF) parallel mechanism

Design and Kinematic Analysis of a Novel Planar Parallel Robot With Pure Translations

Type synthesis of a new parallel mechanism with complete separation of constraints and drives

Analysis of dynamic modeling and solution of 3-RPS parallel mechanism based on conformal geometric algebra