Experimental study on pore structure evolution of thermally treated shales: implications for CO2 storage in underground thermally treated shale horizons
Bodhisatwa Hazra,Debanjan Chandra,Vikram Vishal,Mehdi Ostadhassan,Chinmay Sethi,Binoy K. Saikia,Jai Krishna Pandey,Atul K. Varma
DOI: https://doi.org/10.1007/s40789-024-00717-6
2024-07-13
International Journal of Coal Science & Technology
Abstract:Extracting gas from unconventional shale reservoirs with low permeability is challenging. To overcome this, hydraulic fracturing (HF) is employed. Despite enhancing shale gas production, HF has drawbacks like groundwater pollution and induced earthquakes. Such issues highlight the need for ongoing exploration of novel shale gas extraction methods such as in situ heating through combustion or pyrolysis to mitigate operational and environmental concerns. In this study, thermally immature shales of contrasting organic richness from Rajmahal Basin of India were heated to different temperatures (pyrolysis at 350, 500 and 650 °C) to assess the temperature protocols necessary for hydrocarbon liberation and investigate the evolution of pore structural facets with implications for CO 2 sequestration in underground thermally treated shale horizons. Our results from low-pressure N 2 adsorption reveal reduced adsorption capacity in the shale splits treated at 350 and 500 oC, which can be attributed to structural reworking of the organic matter within the samples leading to formation of complex pore structures that limits the access of nitrogen at low experimental temperatures. Consequently, for both the studied samples BET SSA decreased by ∼58% and 72% at 350 °C, and ∼67% and 68% at 500 °C, whereas average pore diameter increased by ∼45% and 91% at 350 °C, and ∼100% and 94% at 500 °C compared to their untreated counterparts. CO 2 adsorption results, unlike N 2 , revealed a pronounced rise in micropore properties (surface area and volume) at 500 and 650 oC (∼30%–35% and ∼41%–63%, respectively for both samples), contradicting the N 2 adsorption outcomes. Scanning electron microscope (SEM) images complemented the findings, showing pore structures evolving from microcracks to collapsed pores with increasing thermal treatment. Analysis of the SEM images of both samples revealed a notable increase in average pore width (short axis): by ∼4 and 10 times at 350 °C, ∼5 and 12 times at 500 °C, and ∼10 and 28 times at 650 °C compared to the untreated samples. Rock-Eval analysis demonstrated the liberation of almost all pyrolyzable kerogen components in the shales heated to 650 °C. Additionally, the maximum micropore capacity, identified from CO 2 gas adsorption analysis, indicated 650 °C as the ideal temperature for in situ conversion and CO 2 sequestration. Nevertheless, project viability hinges on assessing other relevant aspects of shale gas development such as geomechanical stability and supercritical CO 2 interactions in addition to thermal treatment.
energy & fuels,mining & mineral processing