Abstract:The polymorphic crystalline structure and melting behavior of biodegradable poly(butylene adipate) (PBA) samples melt-crystallized at different crystallization temperatures were studied by differential scanning calorimetry (DSC) and fourier transform infrared (FTIR) spectroscopy. The crystalline structure and melting behavior of PBA were found to be greatly dependent on the crystallization temperature. By comparison of the FTIR spectra and the corresponding second derivatives between the alpha- and beta-crystal of PBA, the spectral differences were identified for the IR bands appeared at 1485, 1271, 1183, and 930 cm(-1) and the possible reasons were presented. Especially, the 930 cm(-1) band was found to be a characteristic band for the beta-crystal. Combining the DSC data with the analysis of normalized intensity changes of several main IR bands during the melting process, the melting behaviors of the alpha- and beta-crystal were clarified in detail. It is demonstrated by the in situ IR measurement that the beta-crystalline phase would transform into the alpha-crystalline phase during the melting process, and the solid-solid phase transition from the beta- to alpha-crystal was well elucidated by comparing the intensity changes of the 1170 and 930 cm-1 bands. The dependence of the beta- to alpha-crystal phase transition on the heating rate was revealed by monitoring the intensity ratio of the 909 and 930 cm-1 band. It was suggested that at the heating rate of 0.5 or 1 degrees C/min, the percent amount of the transformed alpha-crystal from the beta-crystal was much higher than that at the higher heating rate. The beta-crystal transforms into the alpha-crystal incompletely at the higher heating rate because of the less time available for the phase transition. In addition, the beta- to alpha-crystal phase transition was further confirmed by the IR band shifts during the melting process. (C) 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1997-2007, 2009

Photooxidation‐induced conformational changes and degradation behaviors of poly(butylene succinate) and poly(butylene succinate‐co‐adipate)

Hydrolytic Degradation Of Biobased Poly(Butylene Succinate-Co-Furandicarboxylate) And Poly(Butylene Adipate-Co-Furandicarboxylate) Copolyesters Under Mild Conditions

Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable composite

Hydrolytic and Compost Degradation of Biobased PBSF and PBAF Copolyesters with 40–60 Mol% BF Unit

Temperature‐dependent Polymorphic Crystalline Structure and Melting Behavior of Poly(butylene Adipate) Investigated by Time‐resolved FTIR Spectroscopy

Synthesis and Thermomechanical and Rheological Properties of Biodegradable Long-Chain Branched Poly(Butylene Succinate-Co-Butylene Terephthalate) Copolyesters

Fractionated Crystallization, Polymorphic Crystalline Structure, and Spherulite Morphology of Poly(butylene Adipate) in Its Miscible Blend with Poly(butylene Succinate)

Effect of Copolymerized Butylene Terephthalate Chains on Polymorphism and Enzymatic Degradation of Poly(Butylene Adipate)

Synthesis and Characterization of Biodegradable Poly(butylene Succinate‐co‐propylene Succinate)s

Physics and Chemistry-Based Constitutive Modeling of Photo-Oxidative Aging in Semi-Crystalline Polymers

Study on the Photodegradation Stability of Poly(butylene Succinate-co-butylene Adipate)/TiO2 Nanocomposites

Mechanical and thermal characteristics of sustainable poly(lactide)/poly(butylene succinate) and poly(lactide)/poly(butylene succinate-co-butylene adipate-co-ethylene succinate-co-ethylene adipate) blends following degradation

Computational and Experimental Study on the Mechanism of CO2 Production During Photo-Oxidative Degradation of Poly(butylene Adipate-Co-terephthalate): Differences Between PBA and PBT Segments

Synthesis, physical properties and photodegradation of functional poly(butylene succinate) covalently linking UV stabilizing moieties in molecular chains

Effect of Fiber Cross-Sectional and Surface Properties on the Degradation of Biobased Polymers

Computational and Experimental Study on the Mechanism of CO 2 Production during Photo-Oxidative Degradation of Poly(butylene adipate- co -terephthalate): Differences between PBA and PBT Segments

Polymorphic Crystals from Different Thermal Treatments and Its Effect on Biodegradation Behavior of Poly(butylene Adipate)

Structural Analysis of Poly(Butylene Adipate) Banded Spherulites from Their Biodegradation Behavior

Synthesis of Biodegradable Polyester–Polyether with Enhanced Hydrophilicity, Thermal Stability, Toughness, and Degradation Rate

Catalyzed Chain Extension of Poly(butylene Adipate) and Poly(butylene Succinate) with 2,2′‐(1,4‐Phenylene)‐bis(2‐oxazoline)

Synthesis and Crystallization Behavior of Biodegradable Poly(Butylene Succinate-Co-Butylene Phenylsuccinate)