Abstract:Current studies of ceramic topcoat materials for thermal barrier coatings (TBCs) of next generation focus mainly on ternary, quaternary, and more complex oxide systems. The use of high-entropy ZrO2-based ceramics doped with a mixture of rare-earth metal (REM) oxides for TBCs was studied, and the properties of thermal barrier ceramic layers deposited by EB-PVD in one process cycle were examined. For research, a CeO2-based REM concentrate (light concentrate (LC)) with the following composition (wt.%) was chosen: 62.4 CeO2, 13.5 La2O3, 10.9 Nd2O3, 3.9 Pr6O11, 0.92 Sm2O3, 1.2 Gd2O3, 0.24 Eu2O3, 2.66 ZrO2, 1.2 Al2O3, and 1.7SiO2; the total content of other oxides was 1.38. Targets for depositing the thermal barrier ceramic layer were produced by the ceramic synthesis method from the 85 wt.% M-ZrO2–15 wt.% LC mixture. Two-layer metal/ceramic TBCs were deposited employing the UE-174 industrial electron-beam installation operated at ELTECHMACH (Vinnytsia) onto model blades manufactured by directional crystallization from the ZhS-26VI alloy. A rough dense glossy coating was produced. The coating on the blade suction side and leading edge was 85 μm thick and on the blade pressure side was 70 μm thick. The coating phase composition represented a mixture of F-ZrO2 and M-ZrO2. Dense columnar crystallites collected into feather-like structures were observed in the ceramic layer. Vertical pores that formed between the crystallites were located perpendicularly or at an angle to the surface. A complex Al2O3-based spinel layer 2–2.5 μm thick grew between the ceramic topcoat and metallic bond coat layers. The ceramic layer acquired a laminar structure under the synergistic effect of components in the ZrO2–REM concentrate mixture in the vapor deposition process. The microstructural features of the coating determined the microhardness gradient in height. Thermal cycling experiments showed that this coating withstood 161 thermal cycles, which was higher than the standard YSZ coating did (138 thermal cycles). Previous studies showed that ZrO2 stabilization with REM oxide concentrates was promising for the microstructural design of the thermal barrier ceramic layer.

Preparation of CeO2/TiO2 bilayer nanoparticle coating on ZrO2 fibers for thermal radiation shielding applications

Combined Zr and Y Phosphate Coatings Reinforced with Chemically Anchored B2O3 for the Oxidation Inhibition of Carbon Fiber

High-Emissivity Double-Layer ZrB2-Modified Coating on Flexible Aluminum Silicate Fiber Fabric with Enhanced Oxidation Resistance and Tensile Strength

Enhanced Ultraviolet Shielding Performances of TiO₂ Nanorods in Different Crystalline Structures and Illite-Loaded Composites

Thermal and mechanical properties of Sc2O3–CeO2 co-stabilized zirconia ceramic as promising thermal barrier coating material

Preparation of WO3/CeO2/Epoxy Resin Based Multilayer Radiation Shielding Material and Its Property Research

Synthesis and characterizations of Ce-doped ZnO thin films for radiation shielding

Highly Enhanced Infrared Spectral Emissivity of Porous CeO2 Coating

ATO and Cs 0·33 WO 3 loaded bilayer nanofiber membrane doped polymer dispersed liquid crystals for infrared shielding

A facile preparation of ceramic coatings on Ti alloys for thermal protection systems

Ultra-flexible TiO2/SiO2 nanofiber membranes with layered structure for thermal insulation

Fabrication and Characterization of CeO2-Doped Yttria-Stabilized ZrO2 Composite Particles

Effect of CeO₂ on Microstructure and Wear Resistance of TiC Bioinert Coatings on Ti6Al4V Alloy by Laser Cladding

Effects of CeO2 on Microstructural Evolution, Corrosion and Tribology Behavior of Laser Cladded TiC Reinforced Co-based Coatings

Microstructure, radiative property and thermal shock behavior of TaSi2-SiO2-borosilicate glass coating for fibrous ZrO2 ceramic insulation

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Microstructure and Thermal Cycling Behavior of CeO2 Coatings Deposited by the Electron Beam Physical Vapor Technique

Enhanced ablation resistance of ZrC–ZrO2 nanocomposite ceramic coating on TiAlNb medium-entropy alloy prepared by a novel strategy

Effect of K2ZrF6 concentration on thermal ablation resistance of ZrO2/TiO2 composite ceramic coatings on TC4 alloy

High-Entropy Ceramics for Thermal Barrier Coatings Produced from ZrO2 Doped with Rare-Earth Metal Oxides

Preparation and Properties of Thermal Barrier Coating with Nanometer Alumina Coated Zirconia