Abstract:Improving perovskite film quality for reducing non-radiative recombination centers is one of the key aspects of designing efficient and stable perovskite solar cells (PSCs). In this work, we fabricated a high-performing and ambient stable CsPbIBr 2 -based PSC by incorporating a 2D perovskite framework within a 3D perovskite structure. An optimum amount of 2D doping can anchor the grain boundaries to improve the crystallinity and grain sizes and ultimately suppress non-radiative recombination centers within the perovskite. The solution-processed perovskite film with the structural formula ((PEA) 2 PbI 4 ) X (CsPbIBr 2 ) 1− X for X = 0.02 exhibited an improved average grain size of 853.38 ± 0.18 nm in comparison to 350.43 ± 0.09 nm of pristine CsPbIBr 2 thin films. The bulk passivation within the perovskite was supported by the X-ray diffraction, steady-state, and time-resolved photoluminescence results. We fabricated a PSC with the device structure FTO/c-TiO 2 /m-TiO 2 /(PEA) 2 PbI 4 ) X (CsPbIBr 2 ) 1− X /Spiro-OMeTAD/Ag, and achieved a power conversion efficiency (PCE) of 10.13% under ambient conditions with X = 0.02 and only 8.08% PCE for the pristine 3D perovskite ( X = 0) device. The devices with 2D incorporation showed excellent ambient stability without any encapsulation and retained 80% of their initial PCE (T 80 ) after 500 hours of ambient storage, whereas the device with pure 3D perovskite retained only 20% of its initial PCE after 400 hours of ambient storage. Simulation results, in combination with the experimental data, show that a reduced density of recombination centers resulted in much improved device performance.

Fabricating Efficient and Stable Quasi-3D and 3D/2D Perovskite Solar Cells with 2D-Sheets Connected by Inorganic Type Ionic-Bond

High‐Efficiency Quasi‐2D Perovskite Solar Cells Incorporating 2,2′‐biimidazolium Cation

Highly Efficient and Stable 2D 3D Perovskite Solar Cells Fabricated by Interfacial Modification

Two-Dimensional Perovskite Solar Cells with 14.1% Power Conversion Efficiency and 0.68% External Radiative Efficiency

Construction of 2d/3d/2d‐structured Perovskite for High‐Performance and Stable Solar Cells

Surface Reconstruction and In Situ Formation of 2D Layer for Efficient and Stable 2D/3D Perovskite Solar Cells

In Situ Formation of a 2D/3D Heterostructure for Efficient and Stable CsPbI2Br Solar Cells

Architecturing 1D‐2D‐3D Multidimensional Coupled CsPbI 2 Br Perovskites toward Highly Effective and Stable Solar Cells

Organic-inorganic Hybrid Quasi-2D Perovskites Incorporated with Fluorinated Additives for Efficient and Stable Four-Terminal Tandem Solar Cells

Architecturing 1D-2D-3D Multidimensional Coupled CsPbI2 Br Perovskites Toward Highly Effective and Stable Solar Cells.

Amidino-based Dion-Jacobson 2D perovskite for efficient and stable 2D/3D heterostructure perovskite solar cells

Fabrication Strategy for Efficient 2D/3D Perovskite Solar Cells Enabled by Diffusion Passivation and Strain Compensation

Two birds with one stone: Simultaneous realization of constructed 3D/2D heterojunction and p-doping of hole transport layer for highly efficient and stable perovskite solar cells

π-π conjugate structure enabling the channel construction of carrier-facilitated transport in 1D–3D multidimensional CsPbI2Br solar cells with high stability

In Situ Observation and Control of Crystallization Dynamics for Stable and Efficient CsPbI3-Based 2D Perovskite Solar Cells

Highly Efficient and Stable Pure Two-Dimensional Perovskite-Based Solar Cells with the 3-Aminopropionitrile Organic Cation.

Vertically Oriented 2d Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability

Bulk passivation and suppressing non-radiative recombination loss in a 3D all-inorganic CsPbIBr2 perovskite solar cell via a 2D layered perovskite framework

Single-Crystal-Assisted In Situ Phase Reconstruction Enables Efficient and Stable 2D/3D Perovskite Solar Cells

Stable High-Efficiency Two-Dimensional Perovskite Solar Cells Via Bromine Incorporation

Efficient and Stable 3D/2D Perovskite Solar Cells through Vertical Heterostructures with (BA)4AgBiBr8 Nanosheets