Abstract:Polymer flooding is drawing lots of attention because of the technical maturity in some reservoirs. The first commercial polymer flooding in China was performed in the Daqing oilfield and is one of the largest applications in the world. Some laboratory tests from Daqing researchers in China showed that the viscoelasticity of high molecular weight polymers plays a significant role in increasing displacement efficiency. Hence, encouraged by the conventional field applications and new findings on the viscoelasticity effect of polymers on residual oil saturation (ROS), some high-concentration high-molecular-weight (HCHMW) polymer-flooding field tests have been conducted. Although some field tests were well-documented, subsequent progress was seldom reported. It was recently reported that HCHMW has a limited application in Daqing, which does not agree with observations from laboratory core flooding and early field tests. However, the cause of this discrepancy is unclear. Thus, a systematic summary of polymer-flooding mechanisms and field tests in China is necessary. This paper explained why HCHMW is not widely used when considering new understandings of polymer-flooding mechanisms. Different opinions on the viscoelasticity effect of polymers on ROS reduction were critically reviewed. Other mechanisms of polymer flooding, such as wettability change and gravity stability effect, were discussed with regard to widely reported laboratory tests, which were explained in terms of the viscoelasticity effects of polymers on ROS. Recent findings from Chinese field tests were also summarized. Salt-resistance polymers (SRPs) with good economic performance using produced water to prepare polymer solutions were very economically and environmentally promising. Notable progress in SRP flooding and new amphiphilic polymer field tests in China were summarized, and lessons learned were given. Formation blockage, represented by high injection pressure and produced productivity ability, was reported in several oil fields due to misunderstanding of polymers' injectivity. Although the influence of viscoelastic polymers on reservoir conditions is unknown, the injection of very viscous polymers to displace medium-to-high viscosity oils is not recommended. This is especially important for old wells that could cause damage. This paper clarified misleading notions on polymer-flooding implementations based on theory and practices in China.

Research Progress of Molecular Simulation in Acrylamide Polymers with High Degree of Polymerization

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Molecular dynamic simulation of polyamide reverse osmosis membrane

Molecular Simulation Studies on the Interaction Between Different Polymers in Aqueous Solution

Effect of degree of hydrolysis of polyacrylamide on the micromorphology of its solution

Progress in the Research on Branched Polymers with Emphasis on the Chinese Petrochemical Industry

Role of the Polymer in the Emulsion Stability of an Amphoteric Polyacrylamide in Different Flooding Systems

KINETICS OF ACRYLAMIDE POLYMERIZATION IN POLYETHYLENE GLYCOL AQUEOUS SOLUTIONS

Effect of Polymer Degradation on Polymer Flooding in Heterogeneous Reservoirs

Recent Advances in Polymer Flooding in China

Numerical Simulation of Polyacrylamide Hydrogel Prepared via Thermally Initiated Frontal Polymerization

A study of dilational rheological properties of polymers at interfaces

Experimental study on improving oil recovery in fluvial reservoir with polymer solutions

Modeling and Simulation of Polymer Flooding with Time-Varying Injection Pressure

Research Progress of Diffusion Behaviors of Small Molecules in Polymers Using Molecular Simulation

AI-Based Forecasting of Polymer Properties for High-Temperature Butyl Acrylate Polymerizations

Application of process simulation and statistical method to acrylamide polymerization in a batch reactor

Molecular and Mesoscale Simulation Methods for Polymer Materials

Research on Flow Pattern and Molecular Mechanisms of Polymer Molten During Injection Filling Stage

Study of Synthesis Technology and Application of Polyacrylamide

Preparation and properties of nano-silica hybrid hydrophobic associated polyacrylamide for polymer flooding