Abstract:Purpose: Current CyberKnife treatment planning system (TPS) provided two dose calculation algorithms: Ray-tracing and Monte Carlo. Ray-tracing algorithm is fast, but less accurate, and also can't handle irregular fields since a multi-leaf collimator system was recently introduced to CyberKnife M6 system. Monte Carlo method has well-known accuracy, but the current version still takes a long time to finish dose calculations. The purpose of this paper is to develop a GPU-based fast C/S dose engine for CyberKnife system to achieve both accuracy and efficiency. Methods: The TERMA distribution from a poly-energetic source was calculated based on beam's eye view coordinate system, which is GPU friendly and has linear complexity. The dose distribution was then computed by inversely collecting the energy depositions from all TERMA points along 192 collapsed-cone directions. EGSnrc user code was used to pre-calculate energy deposition kernels (EDKs) for a series of mono-energy photons The energy spectrum was reconstructed based on measured tissue maximum ratio (TMR) curve, the TERMA averaged cumulative kernels was then calculated. Beam hardening parameters and intensity profiles were optimized based on measurement data from CyberKnife system. Results: The difference between measured and calculated TMR are less than 1% for all collimators except in the build-up regions. The calculated profiles also showed good agreements with the measured doses within 1% except in the penumbra regions. The developed C/S dose engine was also used to evaluate four clinical CyberKnife treatment plans, the results showed a better dose calculation accuracy than Ray-tracing algorithm compared with Monte Carlo method for heterogeneous cases. For the dose calculation time, it takes about several seconds for one beam depends on collimator size and dose calculation grids. Conclusion: A GPU-based C/S dose engine has been developed for CyberKnife system, which was proven to be efficient and accurate for clinical purpose, and can be easily implemented in TPS.

Clinical application of a GPU-accelerated monte carlo dose verification for cyberknife M6 with Iris collimator

SU-F-T-620: Development of a Convolution/Superposition Dose Engine for CyberKnife System

Film‐based Dose Validation of Monte Carlo Algorithm for Cyberknife System with a CIRS Thorax Phantom

SU‐E‐T‐253: Development of a GDPM Monte Carlo Based Quality Assurance Tool for Cyberknife

Comprehensive Evaluations of Cone-beam CT dose in Image-guided Radiation Therapy via GPU-based Monte Carlo simulations

GPU-based fast Monte Carlo simulation for radiotherapy dose calculation

Development of a GPU-based Monte Carlo dose calculation code for coupled electron-photon transport

Fast 3D dosimetric verifications based on an electronic portal imaging device using a GPU calculation engine.

GPU-accelerated Monte Carlo convolution/superposition implementation for dose calculation

Fast MCsquare-Based Independent Dose Verification Platform for Pencil Beam Scanning Proton Therapy

SU-E-T-252: Developing a Pencil Beam Dose Calculation Algorithm for CyberKnife System.

A feasibility study for in vivo treatment verification of IMRT using Monte Carlo dose calculation and deep learning-based modelling of EPID detector response

SU‐E‐T‐175: Clinical Evaluations of Monte Carlo‐Based Inverse Treatment Plan Optimization for Intensity Modulated Radiotherapy

SU-E-T-513: Clinical Implementation of a GPU Accelerated Pencil Beam Dose Calculation Algorithm.

GPU-based Parallel Monte Carlo Simulation for Radiotherapy Dose Calculation

A New Approach to Integrate GPU-based Monte Carlo Simulation into Inverse Treatment Plan Optimization for Proton Therapy.

Deep learning for accelerating Monte Carlo radiation transport simulation in intensity-modulated radiation therapy

Fast dose calculation of convolution/superposition in radiotherapy based on multi GPU heterogeneous model

TU-AB-BRC-10: Modeling of Radiotherapy Linac Source Terms Using ARCHER Monte Carlo Code: Performance Comparison of GPU and MIC Computing Accelerators.

Semi-Automated Gpu-Based Monte Carlo Dose Calculation for Total Body Irradiation

A GPU‐accelerated Monte Carlo dose computation engine for small animal radiotherapy