Abstract:Influence of recycled milled fillers on the damage tolerance of Glass epoxy composites. The aerospace, automotive, and energy industries can use fiber‐reinforced composites due to their high specific strength and stiffness. However, unexpected external impacts in work cause internal damage and residual strength loss in composite structures. Another ongoing issue is the sustainable management of composite materials' end‐of‐life. The quasi‐static indentation properties of glass epoxy composites are investigated in this study using different kinds of novel filler materials that are recycled from old composite materials: recycled milled carbon (rmCF), recycled milled Kevlar filler (rmKF), and an innovative hybrid filler (rmBF) composed of recycled milled carbon and Kevlar fillers (rmBF). Surface roughness and hardness studies assessed the quasi‐static indentation (QSI) response of neat glass epoxy and glass epoxy composites loaded with fillers using indentation force, absorbed energy, residual dent depth, and evolution of damage area. Compared to the baseline samples, the rmCF composites performed exceptionally well, showing a 16% increase in peak force, a 59% decrease in damaged area, and a 6.32% and 22.5% reduction in surface roughness, respectively (Ra and Sa). After QSI tests, rmC filler samples had 26.8% higher residual flexural strength than neat glass epoxy composites in a three‐point bending test. Through toughening mechanisms like filler interlocking and bridging, micrographs captured using a scanning electron microscope (SEM) showed that recycled fillers provide a higher level of stiffness, better energy dissipation, less damaged area, and overall improved hardness. Highlights Recycled milled carbon (rmCF) and Kevlar hybrid fillers (rmKF) have been integrated into glass/epoxy composites. The damage tolerance of glass epoxy composites was as a whole significantly improved by the rmCF integration. The Kevlar fillers' inadequate adhesion and interlaminar shear strength were compensated for by the Hybrid fillers (rmBF). Micrographs taken with a scanning electron microscope (SEM) clearly show the fillers' role in the resistance to damage propagation processes.

Recycling CF/PEEK offcut waste from laser assisted tape placement: Influence of overlaps and gaps

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

Influence of Process Parameters on the Interlaminar Shear Strength of CF/PEEK Composites In-Situ Consolidated by Laser-Assisted Automated Fiber Placement

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Development and validation of recycled carbon fiber-based binder tapes for automated tape laying processes

The Effect of Resin Interleafing on the Wedge Peel Strength of CF/PEEK Manufactured by Laser-Assisted In Situ Consolidation

Translaminar-envelope Ply for CFRP Mechanical Enhancement

Interlaminar and intralaminar fracture resistance of recycled carbon fibre/PPS composites with tailored fibre/matrix adhesion

The effects of processing parameters on the wedge peel strength of CF/PEEK laminates manufactured using a laser tape placement process

A viable strategy to recycle post-used carbon fiber thermoset composites as a multi-functional filler for PP composites

The effect of laser assisted tape placement processing conditions on microstructural evolution, residual stress and interlaminar shear strength of carbon fibre/PEEK laminates

A Study to Investigate the Mechanical Properties of Recycled Carbon Fibre/Glass Fibre-Reinforced Epoxy Composites Using a Novel Thermal Recycling Process

Optical properties optimization of carbon fiber reinforced thermoplastic tapes by micro surface texturing for enhanced laser heating efficiency and in-situ consolidation quality during AFP process

Recycling of CF-ABS machining waste for large format additive manufacturing

Influence of thermal history and consolidation force on wedge peel strength of CF/PEEK laminates manufactured by laser‐radiated in‐situ consolidation

Repairing of recycled hybrid carbon fiber laminates

A novel approach to enhance the mechanical behavior of glass epoxy laminates with sustainable recycled milled fillers

Investigation of the resin infusion process and mechanical performance of carbon fiber reinforced plastic composites from recycled carbon fiber

New Approach for Processing Recycled Carbon Staple Fiber Yarns into Unidirectionally Reinforced Recycled Carbon Staple Fiber Tape

Recycled Glass Fiber Composites from Wind Turbine Waste for 3D Printing Feedstock: Effects of Fiber Content and Interface on Mechanical Performance

Enhancing Bond Strength Between Carbon Fiber Reinforced Thermoplastic and Aluminum Alloys Through Laser Surface Treatment