Abstract:This paper presents proof-of-concept all-solution-processed wearable thermoelectric generators made of single-walled carbon nanotube/poly(3-hexylthiophene) (SWCNT/P3HT) nanocomposites integrated with biocompatible silk fibroin substrates and Ag nanowires (NWs)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT/PSS) layers. Since well-dispersed SWCNT/P3HT nanocomposites are obtained through π–π interactions between conjugated backbones, continuous and repeated spraying/vacuum processes enabled the silk fibroin-substrated SWCNT/P3HT films to exhibit an optimized power factor of 204 ± 4.6 μW m–1 K–2 at 50 °C, an electrical conductivity of 1170 ± 52.8 S cm–1, and a Seebeck coefficient of 41.8 ± 0.9 μV K–1, which are ∼1.5 times those of the glass-substrated device. This may be attributed to the significantly enhanced conductivity caused by the increased junction density of the SWCNT bundles within the compact and dense SWCNT/P3HT nanocomposites. When a spray-patterned Ag NWs/PEDOT/PSS electrode was assembled, the constructed in-plane SWCNT/P3HT thermoelectric generators with 14 legs produced an open-circuit voltage (V oc) of 22.6 mV and a peak power of 25.1 nW at a temperature difference (ΔT) of 28.8 °C while maintaining good flexibility during bending tests. This demonstrates that these silk fibroin-substrated thermoelectric generator prototypes, which are worn on the forearm, can be used to harvest human body heat, thereby generating a V oc of ∼6.1 mV with a ΔT as low as 8.3 °C between the skin and surrounding air. This study offers a promising strategy for exploiting simple solution-processed thermoelectric nanocomposites assembled using biomass-based substrates and patterned electrodes for low-grade waste heat-harvesting wearable devices.

Personal Thermal Management by Single-Walled Carbon Nanotubes Functionalized Polyester Fabrics

A Janus Membrane Doped with Carbon Nanotubes for Wet–thermal Management

Janus Membrane with Oriented Fiber Structure for Boosted Personal Wet-Thermal Management

Microfluidic-Blow-Spinning fabricated sandwiched structural fabrics for All-Season personal thermal management

Ultraflexible, Breathable, and Form-Stable Phase Change Fibrous Membranes by Green Electrospinning for Personal Thermal Management

An Integrated Flexible Multifunctional Wearable Electronic Device for Personal Health Monitoring and Thermal Management

Experimental design and testing of the electrothermal properties of carbon nanotube film

A Multifunctional Sensing and Heating Fabric Based on Carbon Nanotubes Conductive Film

Dry and Binder-Free Deposition of Single-Walled Carbon Nanotubes on Fabrics for Thermal Regulation and Electromagnetic Interference Shielding

Stretchable, flexible fabric heater based on carbon nanotubes and water polyurethane nanocomposites by wet spinning process

Flexible Highly Thermally Conductive PCM Film Prepared by Centrifugal Electrospinning for Wearable Thermal Management

Highly integrated, breathable, metalized phase change fibrous membranes based on hierarchical coaxial fiber structure for multimodal personal thermal management

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

Multifunctional all‐nanofiber cloth integrating personal health monitoring and thermal regulation capabilities

Breathable and wearable graphene/waterborne polyurethane coated regenerated polyethylene terephthalate fabrics for motion sensing and thermal therapy

High-performance electrothermal fabrics enabled by lignin-derived carbon nanotube yarns

Hierarchical Porous Dual-mode Thermal Management Fabrics Achieved by Regulating Solar and Body Radiations

All-Solution-Processed Polythiophene/Carbon Nanotube Nanocomposites Integrated on Biocompatible Silk Fibroin Substrates for Wearable Thermoelectric Generators

High-Efficiency Electro/Solar-Driven Wearable Heater Tailored by Superelastic Hollow-Porous Polypyrrole/Polyurethane/Zirconium Carbide Fibers for Personal Cold Protection

Melt-blown Fabric/SWCNTs Composites via the Dry and Binder-free Coating Process for Thermal Regulation and Electromagnetic Interference Shielding

A Durable Textile With Advanced Thermal Functions and Electromagnetic Shielding