Abstract:Active vibration control of large laminated cylindrical structures, for example, the cabin of space, air, surficial or subaqueous vehicles, usually requires multiple inputs and multiple outputs to the system, since there are usually multiple vibration sources and each source contains multiple frequency components. The performance of multiple inputs and multiple outputs control system will be dramatically affected by the complex dynamic behavior of the laminated cylindrical structure, thus an effective model is in great request in analyzing and designing the control system. However, there is seldom distributed parametric model, typically, finite element model, applying to the active vibration control system, because of its computational complexity. In this work, we propose an effective finite element model in-loop system of laminated cylindrical structure for multiple inputs and multiple outputs active vibration control simulation. Firstly, an finite element model of laminated thick cylindrical structure with four-node Mindlin degenerated shell element has been constructed. Then, a model reduction procedure has been proposed to obtain in-loop model of the control system. The numerical global modal analysis and harmonic response analysis of the cylindrical structure have been conducted to verify the correctness of the model. Afterward, a multiple inputs and multiple outputs adaptive algorithm which is able to coup with multiple frequencies and multiple sources vibration has been applied to the finite element model in-loop system. Finally, four numerical case studies have been conducted, in which the vibration sources contain multiple frequency components and artificial colored noises. The result shows that the vibration of the multiple control points can be dramatically suppressed simultaneously, which demonstrates the effectiveness of the algorithm and finite element model in-loop system.

Control of large amplitude limit cycle of a multi-dimensional nonlinear dynamic system of a composite cantilever beam

Research on simultaneous control of force and shape for adaptive cable-strut tensile structures

Adaptive Sliding Mode-Like Fuzzy Logic Control for High Order Nonlinear Systems

Nonlinear Cutterhead Pose Control of Large-Diameter Slurry Shields in Complicated Stratum

Research on force control theory of adaptive beam sting structure

Chaotic control of a simply supported beam in a multidimensional system

Parametric Optimal Bounded Feedback Control for Smart Parameter-Controllable Composite Structures

Nonlinear Vibration Control of A Piezoelectric Beam with A Fuzzy Logic Controller

An Experimental Study on the H ∞ Control of a Beam with Controllable Constrained Damping Layer

Active Control for a Flexible Beam with Nonlinear Hysteresis and Time Delay

Dynamic Aeroelastic Response and Active Control of Composite Thin-Walled Beam Structures in Compressible Flow

Modeling and active control of geometrically nonlinear vibration of composite laminates with macro fiber composite

Time-delay feedback control of a cantilever beam with concentrated mass based on the homotopy analysis method

Effective Finite Element Model In-Loop System of Laminated Cylindrical Structure for Multiple Inputs and Multiple Outputs Active Vibration Control

Asymmetrical Barrier Function-Based Adaptive Vibration Control for Nonlinear Flexible Cantilever Beam with Obstacle Restriction

Intelligent control and simulation analysis for vibration reduction of nonlinear structure

Discrete‐time extended state observer‐based model‐free adaptive constrained sliding mode control with modified prescribed performance via CFDL and PFDL

Active Vibration Control of Cantilever Beam in fast Maneuvering Flight Environment

Active Control of A Structure with Continuously Closely Spaced Natural Frequencies

Active Vibration Control of Composite Cantilever Beams

Vibration suppression of a beam using variable structure control with disturbance observer