The in situ construction of oxygen-vacancy-rich NiCo 2 S 4 @NiMoO 4 /Ni 2 P multilevel nanoarrays for high-performance aqueous Zn-ion batteries

Ze Cen,Fang Yang,Jie Wan,Kaibing Xu

DOI: https://doi.org/10.1039/d2nj00213b

IF: 3.3

2022-01-01

New Journal of Chemistry

Abstract:The development of active and durable cathode materials is the key to achieving high-performance water-based zinc-ion batteries.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Ultrasound-induced elevation of interlayer spacing and conductivity of CoNi hydroxides for high-performance Ni-Zn batteries

Hongxuan Tang,Jiujiu Ge,Lanze Li,Xinqiang Zhu,Sai Wu,Fan Wang,Yajun Pang,Zhehong Shen,Cao Guan,Hao Chen

DOI: https://doi.org/10.1016/j.cclet.2022.107768

IF: 9.1

2023-01-01

Chinese Chemical Letters

Abstract:Nickel-zinc (Ni-Zn) batteries hold a lot of promise for energy storage thanks to their high output volt-age, plentiful Zn supply, and low toxicity. Achieving the facile preparation of high-performance cathodes at ambient temperature remains a challenge, it is however essential for practical applications. Here, in the present study, an efficient ultrasound-assisted one-step fabrication of CoNi double hydroxide (UA-CoNi DH) microspheres at room temperature that performs well as a cathode for Ni-Zn batteries was proposed. This designed ultrasound-assisted method induces the formation of metal double hydroxide with an elevation of interlayer spacing and bulk conductivity while maintaining the structure features of CoNi DH prepared without ultrasound assistance. As a result, the UA-CoNi DH as an electrode mate-rial displays highly enhanced electrochemical properties relative to CoNi DH prepared without ultrasound assistance. Benefitting from the improved performance of our UA-CoNi DH electrode, the Ni-Zn battery with UA-CoNi DH as the cathode (UA-CoNi DH//Zn) delivers a good specific capacity (202.36 mAh/g) and rate performance (70.49% capacity maintained at a 10-fold higher current), presenting more than 71.61% and 21.99% improvement relative to the CoNi DH//Zn battery, respectively. This work offers guidelines for constructing high-performance Ni-Zn battery cathodes in an open environment. (c) 2023 Published by Elsevier B.V. on behalf of Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences.
Facile electrochemically induced vacancy modulation of NiCo2O4 cathode toward high-performance aqueous Zn-based battery

Yu Zhang,Dan Sun,Yixun Wang,Xiaoqi Liu,Hongman Sun,Tonghui Cai,Xuejin Li,Han Hu,Xiaoyun Zhang,Wei Xing,Zifeng Yan

DOI: https://doi.org/10.1016/j.cej.2022.139736

IF: 15.1

2023-02-01

Chemical Engineering Journal

Abstract:Transition metal oxides are highly promising cathode materials in rechargeable Zn-based batteries owing to their low cost, high theoretical capacity and good reversibility. Nevertheless, intrinsically low conductivity and sluggish redox reaction kinetics normally result in their inferior specific capacity and poor rate capability, which critically constrains the practical performance of Zn-based batteries. Herein, an ultrafast and controllable electrochemical activation (EA) process is developed to effectively enhance the electrochemical performance of NiCo2O4 cathode. Systematic studies reveal EA process triggers in situ reconstruction of NiCo2O4 lattice by weakening the coordination of Co-O bonds, resulting in the formation of abundant oxygen vacancies (octahedral Co2+). These oxygen vacancies increase the charge carrier density and endow the superficial metallic active sites with higher electrochemical activity, which synergistically accelerates the electrochemical reaction kinetics. The oxygen-deficient NiCo2O4 exhibits a remarkable capacity of 418.9 mAh/g at 1 A/g, which is nearly 5-fold higher than that of pristine NiCo2O4. Furthermore, the oxygen-deficient NiCo2O4//Zn battery presents an extremely high energy density (682.4 Wh kg−1) and excellent power density (50.8 kW kg−1), surpassing most of the reported aqueous rechargeable batteries. This work provides a facile and effective vacancy modulation strategy for the development of advanced materials utilized in energy and catalysis fields.

engineering, chemical, environmental
Design of Hollow Porous P-NiCo2O4@Co3O4 Nanoarray and Its Alkaline Aqueous Zinc-Ion Battery Performance

Zhe Liang,Chenmeng Lv,Luyao Wang,Xiran Li,Shiwen Cheng,Yuqiu Huo

DOI: https://doi.org/10.3390/ijms242115548

IF: 5.6

2023-10-25

International Journal of Molecular Sciences

Abstract:Alkaline aqueous zinc-ion batteries possess a wider potential window than those in mildly acidic systems; they can achieve high energy density and are expected to become the next generation of energy storage devices. In this paper, a hollow porous P-NiCo2O4@Co3O4 nanoarray is obtained by ion etching and the calcination and phosphating of ZiF-67, which is directly grown on foam nickel substrate, as a precursor. It exhibits excellent performance as a cathode material for alkaline aqueous zinc-ion batteries. A high discharge specific capacity of 225.3 mAh g−1 is obtained at 1 A g−1 current density, and it remains 81.9% when the current density is increased to 10 A g−1. After one thousand cycles of charging and discharging at 3 A g−1 current density, the capacity retention rate is 88.8%. Even at an excellent power density of 25.5 kW kg−1, it maintains a high energy density of 304.5 Wh kg−1. It is a vital, promising high-power energy storage device for large-scale applications.

biochemistry & molecular biology,chemistry, multidisciplinary
Engineering Hierarchical Co@N-Doped Carbon Nanotubes/α-Ni(OH)2 Heterostructures on Carbon Cloth Enabling High-Performance Aqueous Nickel-Zinc Batteries

Longzhen Zhu,Ban Fei,Yulan Xie,Daoping Cai,Qidi Chen,Hongbing Zhan

DOI: https://doi.org/10.1021/acsami.1c01711

2021-05-19

Abstract:Searching for high-performance Ni-based cathodes plays an important role in developing better aqueous nickel-zinc (Ni-Zn) batteries. For this purpose, herein, we demonstrate the design and synthesis of ultrathin α-Ni(OH)2 nanosheets branched onto metal-organic frameworks (MOFs)-derived 3D cross-linked N-doped carbon nanotubes encapsulated with tiny Co nanoparticles (denoted as Co@NCNTs/α-Ni(OH)2), which are directly supported on a flexible carbon cloth (CC). An aqueous Ni-Zn battery employing the hierarchical CC/Co@NCNTs/α-Ni(OH)2 as the binder-free cathode and a commercial Zn plate as the anode is fabricated, which displays an ultrahigh capacity (316 mAh g-1) and energy density (540.4 Wh kg-1) at 1 A g-1 as well as excellent rate capability (238 mAh g-1 at 10 A g-1) and superior cycling performance (about 84% capacity retention after 2000 cycles at 10 A g-1). The impressive electrochemical performance might benefit from the rich active sites, rapid electron transfer, cushy electrolyte access, rapid ion transport, and robust structural stability. In addition, the quasi-solid-state CC/Co@NCNTs/α-Ni(OH)2//Zn batteries are also successfully assembled with polymer electrolyte, indicating the great potential for portable and wearable electronics. This work might provide important guidance for constructing carbon-based hybrid materials directly supported on conductive substrates as high-performance electrodes for energy-related devices.
Engineering oxygen vacancies and surface chemical reconstruction of MOF-derived hierarchical CoO/Ni 2 P-Co 2 P nanosheet arrays for advanced aqueous zinc-ion batteries

Zhihao Li,Qiang Jiao,Shu-Ang He,Guanjie He,Ze Cen,Fang Yang,Rujia Zou,Kaibing Xu,Shu-ang He

DOI: https://doi.org/10.1039/d1dt03193g

IF: 4

2021-01-01

Dalton Transactions

Abstract:CoO/Ni 2 P-Co 2 P nanosheet arrays were synthesized by a partial phosphating strategy, and they show superior performances for zinc-ion batteries.

chemistry, inorganic & nuclear
Co3+-Regulated Electronic Structure of NiCo2Sx Nanoneedle Arrays As High-Rate Cathode Materials for Durable Alkaline Ni–Zn Batteries

Ke Qian,Xiaodong Liang,Qin Liu,Jingying Li,Yi Gan,Jia Yao,Junjie Zheng,Ziang Wu,Yin Yang,Xingtai Liu,Xiang Liu,Lin Lv,Hanbin Wang,Jun Zhang,Houzhao Wan,Hao Wang

DOI: https://doi.org/10.1016/j.jpowsour.2023.233998

IF: 9.2

2023-01-01

Journal of Power Sources

Abstract:Alkaline zinc-based batteries have become a current research hotspot due to their high energy density and safety, but their low cycle stability and rate performance limit their commercial applications. Herein, vertically ordered NiCo2Sx nanoneedle arrays are prepared using different sulfidation concentrations based on the anion exchange reaction. The highly uniform nanoneedle arrays provide fast ion transport paths and abundant active sites, and the prepared NiCo2Sx@Ni foam (NiCo2Sx@NF) electrode has the excellent capacity (121.9 mAh g-1), stable cycle performance (91.1 % of capacity retention after 500 cycles), also achieves a maximum energy density of 636.3 Wh kg-1 and a maximum power density of 40.9 kW kg-1. This paper provides a more precise and accurate idea for preparing cathode materials for durable alkaline Ni-Zn batteries.
Oxygen‐Vacancy and Surface Modulation of Ultrathin Nickel Cobaltite Nanosheets as a High‐Energy Cathode for Advanced Zn‐Ion Batteries

Haozhe Zhang,Shilei Xie,Xihong Lu,Yi Han,Yinxiang Zeng,Zhengzhe Lai

DOI: https://doi.org/10.1002/adma.201802396@10.1002/(ISSN)2196-7350.hottopic-interfaces

IF: 5.4

2019-10-03

Advanced Materials Interfaces

Abstract:Abstract The development of high‐capacity, Earth‐abundant, and stable cathode materials for robust aqueous Zn‐ion batteries is an ongoing challenge. Herein, ultrathin nickel cobaltite (NiCo 2 O 4 ) nanosheets with enriched oxygen vacancies and surface phosphate ions (P–NiCo 2 O 4‐ x ) are reported as a new high‐energy‐density cathode material for rechargeable Zn‐ion batteries. The oxygen‐vacancy and surface phosphate‐ion modulation are achieved by annealing the pristine NiCo 2 O 4 nanosheets using a simple phosphating process. Benefiting from the merits of substantially improved electrical conductivity and increased concentration of active sites, the optimized P–NiCo 2 O 4‐ x nanosheet electrode delivers remarkable capacity (309.2 mAh g −1 at 6.0 A g −1 ) and extraordinary rate performance (64% capacity retention at 60.4 A g −1 ). Moreover, based on the P–NiCo 2 O 4‐ x cathode, our fabricated P–NiCo 2 O 4‐ x //Zn battery presents an impressive specific capacity of 361.3 mAh g −1 at the high current density of 3.0 A g −1 in an alkaline electrolyte. Furthermore, extremely high energy density (616.5 Wh kg −1 ) and power density (30.2 kW kg −1 ) are also achieved, which outperforms most of the previously reported aqueous Zn‐ion batteries. This ultrafast and high‐energy aqueous Zn‐ion battery is promising for widespread application to electric vehicles and intelligent devices.

materials science, multidisciplinary,chemistry
Scalable fabrication of NiCoMnO4 yolk-shell microspheres with gradient oxygen vacancies for high-performance aqueous zinc ion batteries

Yan Zhou,Chao Wang,Feiran Chen,Tingjuan Wang,Yaoyao Ni,Nan Yu,Baoyou Geng

DOI: https://doi.org/10.1016/j.jcis.2022.06.152

IF: 9.9

2022-11-15

Journal of Colloid and Interface Science

Abstract:Defect regulation, which enables better charge transfer and capacity retention in manganese-based cathode materials, is the key to the development of rechargeable aqueous zinc-ion batteries. Herein, yolk-shell structured NiCoMnO4-VO with gradient oxygen vacancies are synthesized by spray pyrolysis and ammonia etching. The generation of the yolk-shell structures are regulated by the diffusion rate of ions in the atomized droplets during the nucleation process instead of adding template agent. In addition, the etching effect of ammonia gradually dissolves nickel oxide in the material from the surface to the interior, creating abounding gradient oxygen vacancies and thereby achieving more active sites for zinc storage and faster charge transfer. Therefore, the material exhibits superior electrochemical performances with initial discharge capacities of 277.9 mA h g−1 at 0.2 A g−1, and the long-term capacities retention rate is 89.3% after 2800 cycles at 5 A g−1. Ex-situ XRD demonstrates NiCoMnO4-VO belongs to the embedding-extraction mechanism of H+ and Zn2+. In-situ optical microscopy reveals that the formation of zinc dendrites is suppressed to some extent.

chemistry, physical
In-situ Generating Highly Efficient Sites for Multifunctional Water Splitting/zn-Air Battery over Hierarchically Architectured Fe2Ni3 Nanoalloy/n-Incorporated Carbon Matrix

Tingting Wang,Ying Han,Peiwen Xu,Xinzhen Feng,Weijie Ji,Hamidreza Arandiyan

DOI: https://doi.org/10.1016/j.cej.2022.138245

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:A multifunctional electrocatalyst for water splitting and zinc-air battery involves totally-three reactions, namely, oxygen reduction, oxygen evolution, and hydrogen evolution, and is very demanding and challenging. The current study provided an interesting example to achieve such a goal by establishing hierarchical architecture of Fe2Ni3 nanoalloys/N-incorporated flower-like carbon matrix (Fe2Ni3-NFCM). The resulting material is free of noble metals and can simultaneously promote the three reactions with excellent activity and robust durability. Significantly, the outstanding parameters eta(10) = 280 mV (oxygen evolution), eta(10) = 144 mV (hydrogen evolution), and E-1/2 = 0.84 V vs RHE (oxygen reduction) can be accomplished over Fe2Ni3-NFCM. Moreover, a voltage as low as 1.50 V (10 mA cm(-2)) and a 76-h durability for water-splitting has been achieved. The assembled Zn-air battery employing the current material as the electrodes can provide the power density being similar to 122 mW cm(-2) plus robust cyclic durability. The multifunctional performance reaches the top level among the various counterparts, the structure-performance correlation has been elucidated and the active species/sites identified through the advanced characterizations and detailed comparison investigations.
NiMoO4 nanowires supported on Ni/C nanosheets as high-performance cathode for stable aqueous rechargeable nickel-zinc battery

Lijun Zhou,Siqi Zeng,Dezhou Zheng,Yinxiang Zeng,Fuxin Wang,Wei Xu,Jie Liu,Xihong Lu

DOI: https://doi.org/10.1016/j.cej.2020.125832

IF: 15.1

2020-11-01

Chemical Engineering Journal

Abstract:Nickel-based oxides for aqueous rechargeable nickel-zinc (denoted as Ni//Zn) batteries typically suffer from the low capacity and inferior stability due to their slow electron/ion transportation rate and poor electrochemical reversibility. Here, we rationally design a free-standing Ni/C nanosheets (NC) from Ni metal-organic framework as conductive scaffold for NiMoO4 nanowires (NiMoO4-NC), achieving exceptionally high capacity and rate capability. Furthermore, with the use of a new MoO42−-based electrolyte, a stable aqueous Ni//Zn battery with impressive electrochemical performance is also demonstrated based on this NiMoO4-NC cathode. Experimental results reveal that the NC skeleton can dramatically improve the conductivity and ion diffusion rate of the NiMoO4 nanowires, while the addition of MoO42− into electrolyte can effectively suppress the dissolution and structural destruction of NiMoO4 nanowires. As a consequence, a remarkable capacity (229.2 mAh g−1 at 3.4 A g−1) and excellent durability (85.9% capacity retention after 3000 cycles) are delivered by this Ni//Zn battery, outperforming most reported Ni//Zn batteries. Also, this Ni//Zn battery displays an admirable energy density of 407.8 Wh kg−1, together with a remarkable power density of 18.1 kW kg−1, which is of great significance for future electronic application.
Electrochemically induced NiCoSe2@NiOOH/CoOOH heterostructures as multifunctional cathode materials for flexible hybrid zn batteries

Mangwei Cui,Xiaofang Bai,Jiaxiong Zhu,Cuiping Han,Yan Huang,Litao Kang,Chunyi Zhi,Hongfei Li

DOI: https://doi.org/10.1016/j.ensm.2021.01.015

IF: 20.4

2021-04-01

Energy Storage Materials

Abstract:The hybrid Zn batteries integrate with the two advantages of Zn-air and alkaline Zn batteries, showing high energy and power density and great environmental adaptability. To achieve better electrochemical and catalytic activity of hybrid Zn batteries, designing multifunctional electrode materials that possess simultaneously high electrical conductivity, fast mass transfer kinetics, and sufficient active sites is essential. Herein, porous NiCoSe2@NiOOH/CoOOH () heterostructures, derived from NiCoSe2 (NCS) nanosheets by an in-situ electrochemical phase transformation process, are firstly utilized as multifunctional electrode material for flexible hybrid Zn batteries. During the phase transformation process, the porous nanosheet structure of the highly conductive NCS scaffold can be well maintained and plenty of electroactive sites are formed uniformly, which are beneficial to both faradaic and oxygen reduction/evolution reaction (ORR/OER). Together with sodium polyacrylate (PANa) hydrogel electrolyte, the flexible hybrid battery delivers ultrahigh energy density (944.8 Wh/Kg) and superior cycling life both in a tightly sealed state (capacity retention:105.1% after 4000 cycles) and open-air environment (100 h at 4 mA/cm2), indicating its favorable durability and environmental adaptation. This work may bring the flexible hybrid Zn batteries one step forward toward practical applications and stimulate the pullulation of hybrid energy storage and conversion devices by the introduction of multifunctional electrode materials.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
The Study of Ultrafine Ni-B and Ni-P Amorphous Alloy Powders As Catalysts

Jing‐Fa Deng,Jung Ja Yang,Shishan Sheng,Chen Heng-Rong,Guoxing Xiong

DOI: https://doi.org/10.1006/jcat.1994.1362

IF: 7.3

1994-01-01

Journal of Catalysis

Abstract:Zn-based aqueous batteries become a highlighted field in worldwide research on rechargeable energy storage systems due to their significant merits as safe and cost-effective technology. However, the lack of proper cathode materials having sufficient accessible channels for ionic diffusion in order to achieve excellent power delivery, higher energy storage capacity and good cycle stability challenge their use in practical application. Herein, we demonstrate electrodeposited porous Ni3P superstructures on activated carbon cloth (CC*) as a robust cathode material towards enhanced Ni–Zn aqueous battery technology. The as-deposited Ni3P exhibiting internal porous network with fully exposed active sites accelerates the electrode kinetics by providing affluent channels for electron transfer. This unique structure of Ni3P electrode offers remarkable specific capacity of 258 mA h g−1 along with tremendous high-rate capability (maintains 81% at 11 A g−1). Moreover, the Ni3P@CC*//Zn@CC* battery is capable of showing a record-high specific capacity of 322 mA h g−1, power density 17.5 kW kg−1 and imposing energy density of 661.98 Wh kg−1. These results open a new avenue for developing an easy synthesis strategy for cathode materials of Ni–Zn batteries with boosted electrochemical activity toward affordable and practical energy storage.© 2017 Elsevier Inc. All rights reserved.
Hierarchical Cobalt Oxide@nickel-Vanadium Layer Double Hydroxide Core/shell Nanowire Arrays with Enhanced Areal Specific Capacity for Nickel–zinc Batteries

Shiyuan Wang,Shibin Lai,Pengsong Li,Tengfei Gao,Kai Sun,Xiaotao Ding,Tianhui Xie,Chuan Wu,Xuejin Li,Yun Kuang,Wen Liu,Weimin Yang,Xiaoming Sun

DOI: https://doi.org/10.1016/j.jpowsour.2019.226867

IF: 9.2

2019-01-01

Journal of Power Sources

Abstract:The aqueous Nickel-Zinc batteries have advantages of high safety and environmental benignity. However, their low energy density and poor cycling stability hinder their widespread applications. To address these issues, we demonstrate here a well-aligned hierarchical nanowires array as an advanced cathode for Nickel-Zinc batteries, which is composed of Nickel-vanadium layered double hydroxide decorated on cobalt oxide with a core/sheath configuration featuring merits of high electrical conductivity, large specific surface area, and short diffusion pathway for ions and electrons. Benefiting from the hierarchy structure design and component synergistic effect, the nanowires array electrode with high mass-loading of 11.1 mg cm(-2) exhibits high areal capacity of 1.98 mAh cm(-2) at 5 mA cm(-2), 61.8% capacity retention at 50 mA cm(-2) and excellent cycling stability with 100% retention after 1000 cycles. Moreover, full cell of the as-fabricated nanowiress arrays//Zinc configuration delivers high operating voltage of 1.71 V, energy density up to 2.2 mWh cm(-2), power density up to 82.0 mW cm(-2) and remarkable cycling stability of 89% capacity retention after 1500 cycles, showing great potential for practical applications. This work may also bring new design opportunities for the well-defined nanoarrays electrode in other energy storage devices.
Metal-organic-framework-derived Cobalt-Vanadium Oxides with Tunable Compositions for High-Performance Aqueous Zinc-Ion Batteries

Yanyan Du,Yufeng Xu,Yulin Zhang,Beibei Yang,Hongbin Lu,Cunwang Ge,Duan Bin

DOI: https://doi.org/10.1016/j.cej.2022.141162

2022-01-01

SSRN Electronic Journal

Abstract:As one of next-generation energy storage devices, aqueous zinc-ion batteries (ZIBs) have received increasing attention owing to the merits of low cost, high safety and eco-friendliness. However, challenges still exist in searching for high-performance cathode materials with microstructural engineering and morphology design. Herein, a dissolution-regrowth and conversion strategy are developed by using metal-organic framework template, which facilitate in situ formation of CoVOx oxide with porous one-dimensional channels and unique nanostructures. Owing to the unique structure, Zn2+ ions which are inserted directly into the host CoVOx-2 nanoplate to allow the high diffusion and low interfacial resistance. Consequently, the CoVOx-2 nanoplate cathode delivers a high reversible capacity of 288 mAh/g at 0.05 A/g and long cycle life at low current density of 1 A/g (94 % of the highest capacity is maintained at 1 A/g after 1000 cycles). Moreover, the reversible storage mechanism is confirmed by a series of ex-situ physical characterization and electrochemical performance investigation. These findings provide a new insight into high-performance MOF-derived unique structure designs for rechargeable battery electrodes.
MnO2@PANI Nanorod Arrays for High-Performance Aqueous Zinc-Ion Batteries

Jiexin Wen,Zhipeng Hu,Rui Song,Rui Huang,Qingting Liu,Rong Zhang,Shengfei Hu,Xudong Fu

DOI: https://doi.org/10.1016/j.jallcom.2023.173209

IF: 6.2

2023-01-01

Journal of Alloys and Compounds

Abstract:Eco-friendliness, economic benefits, and good security make aqueous zinc-ion batteries show wide application foreground for energy storage. Developing cathode materials that possess both high structural stability and excellent performance is considerably important. In this work, MnO2@PANI nanorod arrays were used as a binderless cathode material, achieving superb specific capacity (293.7 mA h g(-1) at 0.1 A g(-1)). The ordered nanorod arrays also optimize of electrolyte ions transportation, which is benefit to improving rate performance of batteries. MnO2@PANI nanorod arrays show a capacitance retention of 51 % (150.5 mA h g(-1)), when current density increased by 10-fold while that of MnO2@PANI layer is 35 % (59.9 mA h g(-1)).
MnO 2 @PANI nanorod arrays for high-performance aqueous zinc-ion batteries

Jiexin Wen,Zhipeng Hu,Rui Song,Rui Huang,Qingting Liu,Rong Zhang,Shengfei Hu,Xudong Fu

DOI: https://doi.org/10.1016/j.jallcom.2023.173209

IF: 6.2

2023-12-29

Journal of Alloys and Compounds

Abstract:Eco-friendliness, economic benefits, and good security make aqueous zinc-ion batteries show wide application foreground for energy storage. Developing cathode materials that possess both high structural stability and excellent performance is considerably important. In this work, MnO 2 @PANI nanorod arrays were used as a binderless cathode material, achieving superb specific capacity (293.7 mA h g −1 at 0.1 A g −1 ). The ordered nanorod arrays also optimize of electrolyte ions transportation, which is benefit to improving rate performance of batteries. MnO 2 @PANI nanorod arrays show a capacitance retention of 51 % (150.5 mA h g −1 ), when current density increased by 10-fold while that of MnO 2 @PANI layer is 35 % (59.9 mA h g −1 ).

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Transition Bimetal Based MOF Nanosheets for Robust Aqueous Zn Battery

Jun Wan,Junfeng Li,Zhiheng Xiao,Dandan Tang,Bo Wang,Yongjun Xiao,Weilin Xu

DOI: https://doi.org/10.3389/fmats.2020.00194

2020-06-24

Frontiers in Materials

Abstract:High-performance, good stability, low-cost, and environmentally friendly batteries are important for multifunctional electronics and electric vehicles. Compared with the high-energy density lithium-ion batteries, aqueous rechargeable battery has been extensively researched due to high safety, low cost and much better rate performance. Here, we report a one-step approach to fabricate porous Ni-Cu metal–organic framework (MOF) nanosheet arrays structures for stable energy storage with a high-energy (71.2 mWh cm−3) and high-stability (capacity retention of ≈91% after 2,500 cycles) performance. Furthermore, we synthesized various porous homogeneous Ni-Co, Ni-Zn, Ni-Fe and Ni-Mn bimetal MOF structures with high surface area and conductivity utilizing this rational design. This work provides a simple efficient strategy for constructing porous homogeneous bimetal MOF nanosheet arrays with high energy and stability performance, holding a great potential for future portable electronics.

materials science, multidisciplinary
Ni foam-supported Zn-Co-Ni ternary oxide nanosheet arrays derived from MOF precursor with enhanced performances for supercapcitor and Ni-Zn battery

Daojun Zhang,Liu Yang,Minglun Wei,Caijiang Jiang,Ruyu Cui,Junjie Liu,Xinrong Chang,Bowen Ren,Jingchao Zhang,Liangliang Huang

DOI: https://doi.org/10.1039/d2nj05544a

IF: 3.3

2023-01-27

New Journal of Chemistry

Abstract:In recent years, supercapacitor and alkaline Ni-Zn battery have attracted more and more attention, due to the advantages of high energy density, excellent rate performance, low price, environmental protection and safety. In this work, ZnCoNi-MOF precursor was prepared on nickel foam (NF) by solvothermal method at first, and then the robust transition metal oxide ZnCo2O4-NiO nanosheet arrays material was formed by calcination. As a supercapacitor cathode material, the self-supported ZnCo2O4-NiO nanosheet arrays electrode exhibits a high mass specific capacitance of 196.67 mAh g−1 (1573.66 F g-1) at a current density of 1 A g−1, even when the current density is increased by 20 times, the electrode still maintains 75.5% of initial capacity. In addition, the electrode has excellent rate performance, and the retention rate can still keep 69.6% of initial capacity after 10,000 cycles, which indicates that the electrode material has excellent electrochemical performance and cycle stability. When a ZnCo2O4-NiO//Zn battery was assembled, impressively, the potential platform can be extended to 1.70 V. The ZnCo2O4-NiO//Zn battery delivers a high capacity of 191.67 mAh g−1 at 1 A g−1. After 6000 cycles at the high current density of 8 A g−1, and the capacity retention rate is 63.33%, which is promising for constructing alkaline Ni-Zn battery with long life span.

chemistry, multidisciplinary
Oxygen-Defect Enhanced Anion Adsorption Energy Toward Super-Rate and Durable Cathode for Ni–Zn Batteries

Jia Yao,Houzhao Wan,Chi Chen,Jie Ji,Nengze Wang,Zhaohan Zheng,Jinxia Duan,Xunying Wang,Guokun Ma,Li Tao,Hanbin Wang,Jun Zhang,Hao Wang

DOI: https://doi.org/10.1007/s40820-021-00699-z

2021-01-01

Abstract:Abstract The alkaline zinc-based batteries with high energy density are becoming a research hotspot. However, the poor cycle stability and low-rate performance limit their wide application. Herein, ultra-thin CoNiO 2 nanosheet with rich oxygen defects anchored on the vertically arranged Ni nanotube arrays (O d -CNO@Ni NTs) is used as a positive material for rechargeable alkaline Ni–Zn batteries. As the highly uniform Ni nanotube arrays provide a fast electron/ion transport path and abundant active sites, the O d -CNO@Ni NTs electrode delivers excellent capacity (432.7 mAh g −1 ) and rate capability (218.3 mAh g −1 at 60 A g −1 ). Moreover, our O d -CNO@Ni NTs//Zn battery is capable of an ultra-long lifespan (93.0% of initial capacity after 5000 cycles), extremely high energy density of 547.5 Wh kg −1 and power density of 92.9 kW kg −1 (based on the mass of cathode active substance). Meanwhile, the theoretical calculations reveal that the oxygen defects can enhance the interaction between electrode surface and electrolyte ions, contributing to higher capacity. This work opens a reasonable idea for the development of ultra-durable, ultra-fast, and high-energy Ni–Zn battery."Image missing"

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Interface Engineered and Surface Modulated Electrode Materials for Ultrahigh-Energy-density Wearable NiCo//Fe Batteries

Qiulong Li,Qichong Zhang,Chenglong Liu,Wenbin Gong,Zhengyu Zhou,Ping Man,Jiabin Guo,Bing He,Kai Zhang,Weibang Lu,Yagang Yao

DOI: https://doi.org/10.1016/j.ensm.2020.02.020

IF: 20.4

2020-01-01

Energy Storage Materials

Abstract:The rational design and construction of high-performance fiber-shaped NiCo//Fe batteries is of great importance for the development of portable and wearable electronics. Electrode materials with all hierarchical core-shell heterostructures have great potential for use in high-performance NiCo//Fe batteries as a result of their good conductivity, high mass loading, and short ion-diffusion paths. Herein is proposed a novel freestanding core-shell positive and negative electrode materials developed by depositing NiCoP nanosheets on nanoflake arrays (NiCoP@NiCoP NFAs) and Fe2O3 nanoneedles on TiN nanowire arrays (TiN@Fe2O3 NWAs) directly grown on carbon nanotube fibers (CNTFs). The fabricated NiCoP@NiCoP NFAs/CNTF was validated to be an ultrahigh capacity cathode (1.07 mAh cm(-2) at 2 mA cm(-2)), matching well with the similarly constructed TiN@Fe2O3 NWAs/CNTF anode (0.92 mAh cm(-2) at 2 mA cm(-2)). These electrodes were successfully developed into a high-performance NiCo//Fe battery that exhibited an extraordinary capacity of 0.77 mAh cm(-2) and a remarkable energy density of 265.2 mWh cm(-3). The flexible battery demonstrated an excellent cycling lifespan with 89.4% capacity retention after 4000 cycles. This pioneering study describes a powerful strategy for the rational construction of high-performance electrode materials with hierarchical core-shell heterostructures and constitutes a novel approach for the development of new-generation wearable aqueous rechargeable batteries.

The in situ construction of oxygen-vacancy-rich NiCo 2 S 4 @NiMoO 4 /Ni 2 P multilevel nanoarrays for high-performance aqueous Zn-ion batteries

Ultrasound-induced elevation of interlayer spacing and conductivity of CoNi hydroxides for high-performance Ni-Zn batteries

Facile electrochemically induced vacancy modulation of NiCo2O4 cathode toward high-performance aqueous Zn-based battery

Design of Hollow Porous P-NiCo2O4@Co3O4 Nanoarray and Its Alkaline Aqueous Zinc-Ion Battery Performance

Engineering Hierarchical Co@N-Doped Carbon Nanotubes/α-Ni(OH)2 Heterostructures on Carbon Cloth Enabling High-Performance Aqueous Nickel-Zinc Batteries

Engineering oxygen vacancies and surface chemical reconstruction of MOF-derived hierarchical CoO/Ni 2 P-Co 2 P nanosheet arrays for advanced aqueous zinc-ion batteries

Co3+-Regulated Electronic Structure of NiCo2Sx Nanoneedle Arrays As High-Rate Cathode Materials for Durable Alkaline Ni–Zn Batteries

Oxygen‐Vacancy and Surface Modulation of Ultrathin Nickel Cobaltite Nanosheets as a High‐Energy Cathode for Advanced Zn‐Ion Batteries

Scalable fabrication of NiCoMnO4 yolk-shell microspheres with gradient oxygen vacancies for high-performance aqueous zinc ion batteries

In-situ Generating Highly Efficient Sites for Multifunctional Water Splitting/zn-Air Battery over Hierarchically Architectured Fe2Ni3 Nanoalloy/n-Incorporated Carbon Matrix

NiMoO4 nanowires supported on Ni/C nanosheets as high-performance cathode for stable aqueous rechargeable nickel-zinc battery

Electrochemically induced NiCoSe2@NiOOH/CoOOH heterostructures as multifunctional cathode materials for flexible hybrid zn batteries

The Study of Ultrafine Ni-B and Ni-P Amorphous Alloy Powders As Catalysts

Hierarchical Cobalt Oxide@nickel-Vanadium Layer Double Hydroxide Core/shell Nanowire Arrays with Enhanced Areal Specific Capacity for Nickel–zinc Batteries

Metal-organic-framework-derived Cobalt-Vanadium Oxides with Tunable Compositions for High-Performance Aqueous Zinc-Ion Batteries

MnO2@PANI Nanorod Arrays for High-Performance Aqueous Zinc-Ion Batteries

MnO 2 @PANI nanorod arrays for high-performance aqueous zinc-ion batteries

Transition Bimetal Based MOF Nanosheets for Robust Aqueous Zn Battery

Ni foam-supported Zn-Co-Ni ternary oxide nanosheet arrays derived from MOF precursor with enhanced performances for supercapcitor and Ni-Zn battery

Oxygen-Defect Enhanced Anion Adsorption Energy Toward Super-Rate and Durable Cathode for Ni–Zn Batteries

Interface Engineered and Surface Modulated Electrode Materials for Ultrahigh-Energy-density Wearable NiCo//Fe Batteries