Abstract:To investigate the effects of circulating ash heat carriers and dolomite catalysts on sulfur migration in the coal pyrolysis/circulating fluidized bed combustion staged conversion process, five experiments of coal pyrolysis, ash/coal co-pyrolysis, coal pyrolysis catalyzed by dolomite, ash/coal co-pyrolysis catalyzed by dolomite and combustion of pyrolysis solid products were designed and carried out. By examining the effects of pyrolysis temperature, heating rate, ash-coal ratio and dolomite species on sulfur migration, the final distribution of sulfur-containing pollutants throughout the staged conversion process was systematically analyzed. The results showed that the separate mixing of ash heat carrier at final pyrolysis temperature of 600 °C increased the residual sulfur in solid phase from 79.29% of raw coal pyrolysis to 90.00%. When dolomite catalyst was added individually, the sulfur released into gas phase and tar was reduced from 18.28% and 2.43% of the raw coal to 13.14% and 1.94%, respectively. And Fe additive significantly improved sulfur resistance of the dolomite catalyst. The regeneration process has little effect on the sulfur fixation capacity of natural dolomite. When ash heat carrier and dolomite catalyst were simultaneously added to the system, the sulfur fixed in ash increased from 79.29% of the raw coal to 91.27%, and the sulfur fixed in natural dolomite and modified dolomite accounted for 4.32% and 4.46% of the total sulfur, respectively. In the combustion experiments of pyrolysis solid phase products, 43.57%, 65.57% and 61.44% of sulfur was retained in the solid phase residue after combustion with circulating ash, circulating ash/natural dolomite and circulating ash/modified dolomite were added, respectively. Compared with direct combustion of coal, the staged conversion process resulted in a 55% reduction of sulfur in the boiler flue gas. This study provides a theoretical basis for the purification of sulfur-containing pollutants in the staged conversion process.

Study on the Catalytic Effect of Converter Dust on In Situ Online Reforming of Metallurgical By‐Product Gas and Thermochemical Energy Storage Analysis

Kinetic Study of Reactive Sorption-Enhanced Reforming of Coke Oven Gas for Hydrogen Production

Production of high-quality combustible gas: The green and efficient utilization of inferior dust removal ash and high-temperature flue gas in converters

Process characteristics of catalytic thermochemical conversion of oily sludge with addition of steel slag towards energy and iron recovery

Facilitating CO2–CH4 Reforming Into Syngas and Useful Chemicals by Water‐Cooled Dielectric Barrier Discharge Plasma: Effect of Discharge Power, Gas Mixing, and Mechanism Insight

Design, energy efficiency, and CO 2 emissions analysis of a power generation process of coking dry gas reforming coupled with solid oxide fuel cell and organic Rankine cycle

Direct carbon dioxide-methane solid oxide fuel cells combined with in-situ exsolution perovskite La0.75Sr0.25Cr0.5Fe0.4Cu0.1O3-δ-based dry reforming catalysts

On-Site Experimental Study on Low-Temperature Deep Waste Heat Recovery of Actual Flue Gas from the Reformer of Hydrogen Production

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor

Chemical looping co-conversion of CH4 and CO2 using Fe2O3/Al2O3 pellets as both oxygen carrier and catalyst in a fluidized bed reactor

In-depth study on the synergistic conversion mechanism of iron ore with waste biochar for co-producing directly reduced iron (DRI) and syngas

Recent Progress of Catalyst Design for Carbon Dioxide Reforming of Methane to Syngas

Thermodynamic Reaction Study of Conversion of H2S and CO2 and the Promoting Effect of Light on the Reaction

Experimental Study on the Integrated Performance of Dust Removal and Water Vapour Recovery in Catalytic Cracking Gas

Current situation and development prospects of metallurgical by-product gas utilization in China's steel industry

Behavior of Carbothermal Dephosphorization of Phosphorus-Containing Converter Slag and Its Resource Utilization

Highly active and stable cobalt catalysts with tungsten carbide-activated carbon support for dry reforming methane: Effect of the different promoters

Energy and exergy analysis based on an energy saving process of waste tires pressurized catalytic reforming

Mechanism of sulfur migration and conversion in pyrolysis/combustion staged conversion process of high sulfur coal

Co‐Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells

(Invited) Elevated Temperature CO2 Adsorption Separation and Electrochemical Conversion：Reaction Mechanism and Technology Development