Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

Thermal decomposition characteristics and runaway boundary conditions of HATO at adiabatic and high pressure situations

Study on the control of flow field by resonance acoustic mixing technology for purification of high performance spherical HATO crystals

Thermal behaviors of a novel N-oxide amphoteric energetic compound 4,6-diamino-3-hydroxy-2-oxo-2,3-dihydro-1,3,5-triazine-1-oxide

Molecular dynamics insight into the evolution of AlH3 nanoparticles in the thermal decomposition of insensitive energetic materials

Studies on the thermal behavior and safety of a novel thermostable explosive BPTAP

Numerical study of countermeasure against thermal stimuli for HMX-based polymer-bonded explosives

Thermal characterization of the promising energetic material TKX-50

Thermodynamic Properties, Decomposition Kinetics of 2-(5-Amino-2h-tetrazol-1-yl)-4-amine-3,5-dinitropyridine

Thermal decomposition kinetics and compatibility of NH3OHN5

Thermal Instability and Kinetics Analysis on Triacetone Triperoxide (TATP)

Calorimetric evaluation of thermal stability and runaway hazard based on thermokinetic parameters of O,O–dimethyl phosphoramidothioate

Thermal decomposition mechanism of HMX/HTPB hybrid explosives studied by reactive molecular dynamics

Ab Initio Neural Network MD Simulation of Thermal Decomposition of a High Energy Material CL-20/TNT.

Thermal hazard estimation of HTP-65W with kinetic equations and heat transfer model

Thermal decomposition and combustion characteristics of Al/AP/HTPB propellant

Insights into pyrolysis and combustion mechanism of green energetic agent 5-amino-1 h-tetrazole with different particle sizes

Thermal Behavior and Decomposition Mechanism of Three Nitrate Energetic Materials: TNNP, TNOP and DNHM

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

TATB thermal decomposition: An improved kinetic model for explosive safety analysis

Simulation Approach to Decomposition Kinetics and Thermal Hazards of Hexamethylenetetramine

Experimental and Numerical Simulation Study on Thermal Decomposition Model of Ammonium Nitrate