Abstract:Bioethanol to butadiene is currently the most promising non-oil-based butadiene production route. Here, copper is introduced into the conventional bimetallic zeolite catalyst to partially substitute for zinc; the isolated tetracoordinated Cu(II) species are formed, with weak and strong basic sites transformed into medium acid sites in trimetallic CuZnY/SiBEA catalyst. A partial substitution of zinc by copper increases the dispersion of metal, reduces the formation of ZnO clusters, decreases the pore blockage, and enhances the total pore volume of catalyst. The Cu1Zn2Y5/SiBEA catalyst with an appropriate 0.33 Cu/(Cu + Zn) mass ratio, a highest medium acid sites/(weak + strong) basic sites value of 6.17, and largest total pore volume of 0.251 cm3/g in all samples presents excellent catalytic performance in the ethanol to butadiene reaction: 99.01% ethanol conversion and 73.36% butadiene selectivity, higher than most reported ethanol to butadiene catalysts. The isolated tetracoordinated Cu(II) structure is stable, which is beneficial to the stability of trimetallic catalyst; when the reaction time is 60 h, the butadiene selectivity is 45.95%, 14% higher than corresponding bimetallic catalyst. The butadiene productivity of Cu1Zn2Y5/SiBEA catalyst reaches up to 1.68 gBD·gcat−1·h−1 at WHSV = 6 h−1 and time-on-stream = 8 h. Increasing reaction temperature could linearly increase the ethanol conversion, while the butadiene selectivity increases first and then decreases, the suitable temperature is 375 °C for the highest butadiene yield.

Tuning the Acid–Base Properties of Lignin-Derived Carbon Modulated ZnZr/SiO2 Catalysts for Selective and Efficient Production of Butadiene from Ethanol

Selective synthesis of butadiene directly from aqueous ethanol over high performance multifunctional catalyst based on ZnZrSi oxide system

One-step High-Yield Production of Renewable Propene from Bioethanol over Composite ZnCeOx Oxide and HBeta Zeolite with Balanced Brönsted/Lewis Acidity

Recent advances in tailor-made catalysts for the direct conversion of ethanol to butadiene

Enhanced Performance and Stability of a Trimetallic CuZnY/SiBEA Catalyst in Ethanol to Butadiene Reaction by Introducing Copper to Optimize Acid/Base Ratio

Effect of Doping Metal Oxide in ZnO/SBA-15 on Its Acid-Base Properties and Performance in Ethanol-to-Butadiene Process

Direct Conversion of Bio-Ethanol to Isobutene on Nanosized Zn(x)Zr(y)O(z) Mixed Oxides with Balanced Acid-Base Sites.

Reaction Mechanism of One-Step Conversion of Ethanol to 1,3-Butadiene over Zn-Y/BEA and Superior Catalysts Screening

Highly Efficient Conversion of Kraft Lignin into Liquid Fuels with a Co-Zn-beta Zeolite Catalyst

Catalytic Alcoholysis of Lignin with HY and ZSM-5 Zeolite Catalysts

A Kinetic Study on Ethanol Coupling with Acetaldehyde to 1, 3‐Butadiene over Zr‐β Zeolite: Insight into Deactivation

Structure Regulation of Lignin-Derived N-Doped Carbon-Supported Ni Catalyst for Efficient Upgrading of Ethanol to Higher Alcohols

Highly Active and Selective Zr/MCF Catalyst for Production of 1,3-Butadiene from Ethanol in a Dual Fixed Bed Reactor System

Efficient Catalytic Upgrading of Ethanol to Higher Alcohols via Inhibiting C–C Cleavage and Promoting C–C Coupling over Biomass-Derived NiZn@NC Catalysts

Efficient and controllable alcoholysis of Kraft lignin catalyzed by porous zeolite-supported nickel-copper catalyst

Production of liquid fuels via catalytic transfer hydrogenation promoting lignin depolymerization on modified Y zeolite: Formic acid as a continuous hydrogen source

Synthesis of 1,3-butadiene from ethanol/acetaldehyde over ZrO2-MgO-SiO2 catalyst: The thermodynamics and reaction kinetics analysis

Insights into the Synergistic Effect of Active Centers over ZnMg/SBA-15 Catalysts in Direct Synthesis of Butadiene from Ethanol

High Conversion of Syngas to Ethene and Propene on Bifunctional Catalysts via the Tailoring of SAPO Zeolite Structure

Bimetallic Zn And Hf On Silica Catalysts For The Conversion Of Ethanol To 1,3-Butadiene

Kraft Lignin Ethanolysis over Zeolites with Different Acidity and Pore Structures for Aromatics Production