Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Performance degradation and reliability technology of high-efficiency N-type TOPCon photovoltaic cells and their encapsulated components based on TRIZ innovative model

Loss Mechanism Analyses of Perovskite Solar Cells with Equivalent Circuit Model

Enhancing industrialization TOPCon solar cell efficiency via comprehensive anti-reflection passivation film optimization

Novel Tandem Passivated Contact Approach for High-Efficiency Industrial TOPCon Solar Cells

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Performance of Large Area n-TOPCon Solar Cells with Selective Poly-Si Based Passivating Contacts Prepared by PECVD Method

Enhancing the reliability of TOPCon technology by laser-enhanced contact firing

Influence of rear surface pyramid base microstructure on industrial n-TOPCon solar cell performances

Electrical Performance, Loss Analysis, and Efficiency Potential of Industrial‐Type PERC, TOPCon, and SHJ Solar Cells: A Comparative Study

High-efficiency n-TOPCon bifacial solar cells with selective poly-Si based passivating contacts

Improved interface passivation by optimizing a polysilicon film under different hydrogen dilution in N-type TOPCon silicon solar cells

Research on optimization of annealing process based on N-type TOPCon solar cell

Analysis of passivation property using thin Al2O3 layer and simulation for realization of high-efficiency TOPCon cell

Theoretical exploration towards high-efficiency tunnel oxide passivated carrier-selective contacts (TOPCon) solar cells

Highly passivated TOPCon bottom cells for perovskite/silicon tandem solar cells

Highly improved passivation of PECVD p-type TOPCon by suppressing plasma-oxidation ion-bombardment-induced damages

Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain

Encapsulation and Stability Testing of Perovskite Solar Cells for Real Life Applications

Unraveling the Passivation Mechanisms of C-Si/Siox/Poly-Si Contacts

Compensating Cutting Losses by Passivation Solution for Industry Upgradation of TOPCon and SHJ Solar Cells

Stability Improvement of Perovskite Solar Cells by Compositional and Interfacial Engineering