Abstract:NiCoCrAlTaY coating is widely used in high temperature oxidation resistance, gas erosion protection and gas path sealing of hot-end parts of aeroengines and gas turbines. In this study, NiCoCrAlTaY coatings were prepared on cobalt-based superalloy substrates by high pressure cold spray technology. The microstructure, mechanical property and tribological behaviors of the coatings before and after thermal exposure at 1050 °C were systemically studied. The results showed that NiCoCrAlTaY coatings with very dense structure could be obtained by high-pressure cold spraying with nitrogen as carrier gas. The coating remained completely intimate with the substrate without any cracking and spalling after thermal exposure at 1050 °C for 500 h. Due to elemental diffusion at high temperatures, the coating formed a four-layer structure, including alumina film on the surface, β-NiAl phase depletion layer near the surface, intermediate layer containing β-NiAl phase and β-NiAl phase depletion layer near the substrate. With the prolongation of thermal exposure at 1050 °C, the thicknesses of β-NiAl phase depletion layers both near the surface and the substrate increased. The thickness and content of the intermediate β-NiAl phase layer decreased gradually during thermal exposure. Besides, the average hardness values of the coating rapidly decreased by about 30 % after thermal exposure at 1050 °C for 5 h. In particular, the hardness of the β-NiAl phase depletion layer near the surface substrate was lower than that of the intermediate area containing β-NiAl phase. Due to the microstructure and hardness evolution, the wear resistance of the coating decreased significantly after thermal exposure. The friction coefficient of the coating increased from 0.2 to 0.5, and the volume wear rate of the thermally exposed coating was about 4.5 times higher than that of the as-sprayed coating. The results of this study provide guidance for design and application of high-performance MCrAlY coatings.

Effect of heat treatment temperature on the microstructure and wear corrosion properties of NiCrBSi–TiN composite coatings

Effect of different heat-treated temperatures upon structural and abrasive performance of Ni-TiN composite nanocoatings

Influence of Heat Treatments on the Microstructure As Well As Mechanical and Tribological Properties of NiCrAlY-Mo-Ag Coatings

Effect of Heat Treatment on the Microstructure, Mechanical Property and Tribological Property of Plasma-Sprayed High Temperature Lubricating Composite Coating from Nanostructured Powder

High Temperature Sliding Wear Behaviors of Ion Plating Tin Composite Coating with Ion Nitriding As Interlayer on Hot Work Die Steel

Effects of Heat Treatment on Structure Transformation of Cr/Al Composite Coatings

Mechanical, Tribological and Oxidation Resistance Properties of Ni-based Self-Lubricating Composite Coatings at Elevated Temperature by APS

Tribological performance and high temperature oxidation behaviour of thermal sprayed Ni- and NiCrAlY-based composite coatings

Microstructural and tribological characterization of NiAl matrix self-lubricating composite coatings by atmospheric plasma spraying

Effect of heat treatment on the microstructure and properties of CoCrFeNiMo0.2 particles reinforced titanium matrix composites

Effect of high temperature exposure on microstructure, mechanical and tribological properties of cold sprayed NiCoCrAlTaY coatings

High-temperature tribological behavior of thermally-treated supersonic plasma sprayed Cr3C2-NiCr coatings

Effects of Ni-5 wt% Al/Bi2O3 addition and heat treatment on mechanical and tribological properties of atmospheric plasma sprayed Al2O3 coating

Effects of Thermal Treatment on Microstructure and Wear Properties of Ni60/CeO2 Composite Coating 35CrMoV Steel by Laser Cladding

High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying

Influence of heat treatment on laser clad Ta reinforced NiCrBSi coating

Effect of heat treatment on the microstructure and corrosion behaviors of reactive plasma sprayed TiCN coatings

Effects of heat treatments on the microstructure and hardness of thermally sprayed Ni-Cr-Mo-Al alloy coating

The Tribological Property and Microstructure of Ni-Ti Coating Prepared by Electrodeposition and Heat Treatment

Preparation, Mechanical Properties and Cyclic Oxidation Behavior of the Nanostructured NiCrCoAlY-TiB2 Coating

High temperature and room temperature tribological behaviors of in-situ carbides reinforced Ni-based composites by reactive sintering Ni and Ti2AlC precursor