Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

The Manufacturing of Electrodes: Key Process for the Future Success of Lithium-Ion Batteries

Toward Data‐Driven Applications in Lithium‐Ion Battery Cell Manufacturing

Insights Into Scalable Technologies and Process Chains for Sulfide‐Based Solid‐State Battery Production

Roadmap on Li-ion battery manufacturing research

From Materials to Cell: State-of-the-Art and Prospective Technologies for Lithium-Ion Battery Electrode Processing.

Optimizing lithium-ion battery electrode manufacturing: Advances and prospects in process simulation

From laboratory innovations to materials manufacturing for lithium-based batteries

Empowering Lithium-Ion Battery Manufacturing with Big Data: Current Status, Challenges, and Future

Efficient Analysis of Interdependencies in Electrode Manufacturing Through Joint Application of Design of Experiments and Explainable Machine Learning

Lithium-ion battery cell formation: status and future directions towards a knowledge-based process design

Current status and challenges for automotive battery production technologies

Quantifying key factors for optimised manufacturing of Li-ion battery anode and cathode via artificial intelligence

Process strategies for laser cutting of electrodes in lithium-ion battery production

Electrode Fabrication Techniques for Li Ion Based Energy Storage System: A Review

Optimization of electrode manufacturing processes from the perspective of mechanical properties

Transforming Materials into Practical Automotive Lithium‐Ion Batteries

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

Integrated Product and Process Model for Production System Design and Quality Assurance for EV Battery Cells

Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure

Interdependencies in Electrode Manufacturing: A Comprehensive Study Based on Design Augmentation and Explainable Machine Learning

Investigation of the Adhesion Strength along the Electrode Manufacturing Process for Improved Lithium‐Ion Anodes